EVA 3 PCB Klicky Mount (Volcano Hotend)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A PCB Klicky mount for the EVA 3 toolhead running a volcano hotend
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 152
- Wydruki
- 2
- Wyświetlenia
- 1923
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I couldn't find a mount for the PCB Klicky probe for the EVA 3 toolhead, so came up with this design. It borrows the toolhead mount point from other EVA 3-compliant probe mounts.
You'll need M2 heat inserts (the ones that come with the PCB Klicky kit are the ones I used) for the 3 holes that secure the PCB to the print via the screw-in magnets.
You can see in the attached pictures that when triggered, the mount leaves a bit of distance between the nozzle and bed.
It's pretty close, but I haven't run into any issues with the nozzle running into the bed while calculating Z-tilt. If you do, you can use M3 washers between the probe body (the one that's picked up) and the magnets to give a little extra distance to the probe switch.
To print
place the entirely flat side on the bed, and print with supports.
offsets:
x_offset: -23.34
y_offset: -20.49
Happy printing!