Case for Volcano Nozzles *** Updated ***
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case to hold up to 45 spare Volcano nozzles.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 148
- Wydruki
- 2
- Wyświetlenia
- 650
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Updated: I added another Top that is 2mm deeper. I have not tested it however. This is only for the hinge pin version not the Print in Place. Please let me know if there is a problem with it.
Here is a case to hold up to 45 Volcano style nozzles. I have several versions. I have two print in place. One with and one without nozzle sizes. The one with the sizes didn't show up to well. It would be better printed in Resin. Then I also have a version where you can use a piece of filament as the hinge pin. With or without the nozzle sizes. I recommend just printing the parts with “Blank” in the file name. I have included a test block so you can get the hole size correct before you start the full print. Have the test block laying flat. I also included a PDF file. You can print it at 100% then cut it out and write in your own nozzle sizes and use double sided scotch tape or glue to hold it in the lid. I have not printed the print in place one yet. So I don't know how it will actually work. It is my first print in place design. If you decide to print it, Please let me know how it worked and if it needs improving. Thank you.
Layer height .2
Infill 10%
No Supports