Voron Stealthburner V6+Volcano Toolhead Extension Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mod elongates the ducts on the V6 print head and SB face to allow the use of a Volcano nozzle on a V6 hotend.
- Ocena
- 5 / 5
- Polubienia
- 113
- Pobrania
- 992
- Wydruki
- 2
- Wyświetlenia
- 5264
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
A Duct-Extended v6 Printhead for the Stealthburner
The Voron Stealthburner toolhead includes a printhead module that is compatible with a standard v6 hotend. In this mod I attempted to replicate bythorsthunder's mod for the Stealthburner Rapido UHF, except using the Stealthburner v6 print head as a starting point so that the SB can now accommodate a v6 hotend that is equipped with a Volcano nozzle.
Why is this useful?
It's possible to get fully equipped v6 hotends for just a few dollars each. Their flow rate can potentially be increased by adding a Volcano nozzle and, optionally, a copper nut around the nozzle. (CNC Kitchen documented this in their Youtube video Volcano is Obsolete: Just use Nuts!) The flow rate could be further further increased by upgrading to a Volcano-length ceramic heater. This all makes it possible to build relatively high performance SB compatible print heads on a budget.
Customizing the Duct Length
The included f360 file (inside of the .zip) has a single parameter that sets the distance to extend the ducts. Measure the distance that the nozzle's threads extend from the heat block to get a rough idea of how far you might want to extend them. In my case this was 9.5mm so the included STLs are set at that length. In one of the included screenshots I've set the nozzle extension parameter to 1000mm as an extreme example.