Voron EVA Carriage for V6 Volcano

Upgraded version of the EVA Mod for Trident/2.4 with support for the V6 Volcano and the regular voron drag chain. Sadly it reduces the print volume (depending on your cable routing skills) by 30mm but gives you the convenience of a cheap HF Hotend (Aliexpress) and way better part cooling compared to the Stealthburner.

This version only supports Sherpa Mini Extruder with the customized Backplate. But there are 4 Insert which can be used to model mountig plates for diffrent Exturders.

Printed in PETG with 0.2mm layer height.

This mod requires quite a lot of M3 Screws, brass inserts and 4 M3 Nuts. Its based on the EVA 2 conversion from majarspeed at Github.

Klipper Config:

[homing_override]
axes: xyz
set_position_z: 0
set_position_x: 270
set_position_y: 305
gcode:
  G90
  G0 Z5 F600
  G28 X
  ## Set X below to a sale location off of the right corner to ensure that you do not hit the AB mount when HOMING. 
  G0 X225 F7200
  G28 Y
  ## XY Location of the Z Endstop Switch
  ## Update X0 and Y0 to your values (such as X132, Y300) after going through
  ## Z Endstop Pin Location Definition step.
  G0 X117 Y291 F3600 
  G28 Z
  G0 Z10 F1800
  ##Park after Homing
  G0 X130 Y150 Z30 F7200 

If you have questions feel free!