Kingroon KP3S v3 adjustable fan mount for V6 or volcano - titan or BMG extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This height-adjustable fan duct for the Kingroon KP3S v3
- Ocena
- 4 / 5
- Polubienia
- 61
- Pobrania
- 301
- Wydruki
- 1
- Wyświetlenia
- 3777
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This height-adjustable fan duct and mount will work with the latest (titan) version of the Kingroon KP3S to allow you to use either the stock titan extruder or a BMG with a E3D V6, E3D volcano, NF smart, etc hotend. Some additional M3 screws in varying lengths will be needed, but I wasn't really paying attention to what I pulled our of the spares jar.
Print Settings
Printer:
Longer LK1
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
30
Filament:
Priline & Inland CF PC & ABS
Black & Green
Notes:
Print as provided. Only the bracket requires supports. Suggest 4+ walls, 5 bottom/top, and 30% infill. ABS or better highly recommended.
Category: 3D Printer Parts