Liczymy pasujące modele…
I think this duct design is at it's core one of the better options you can find for this printer. It does have overhangs though that would be prone to sagging. I made a version with basically identical dimensions, but with chamfers that…
This adapts a 80mm fan into the 40mm hole which has the nozzle exhaust chamber. I haven't got it working as the fan it's replacing is 24v and I don't know how to get 12v power to the fan. Check my other model which is the nozzle exhaust:…
A replacement nozzle cooling system with a duct to fit an 80mm fan. Haven't tried it yet as I'm looking for a way to convert 24v to 12v for the fan. Check out my other model for the fan Duct:…
Kingroon KP3S Spool holder mounts to the back left of your printer so you can still utilize the filament run out sensor. Make sure to mount the arm high enough to where your spool doesnt touch your desk. Needs four M3 T nuts to mount into…
My original motherboard was damaged and, unable to find a replacement, I decided to adapt an SKR Mini E3 v3.0 board, which is easier to find and adapt.
I remixed a spool holder for my Kingroon KP3s There are two remix versions. V1.1 got tilted and is a bit longer than the original and fits on the printbed of a KP3s. V1.2 doesn't fit on the print bed of a KP3s so I printed it on my X1. It…
Double‑outlet fan duct for a modified E3D v6 hotend (titan extruder) Filament: PETG or ABS Supports: No Raft: No Resolution: 0.2 Important: set variable layer heights so that the air outlets print correctly P.S. Be aware: the model has…
After purchasing the KLP1, I was unpleasantly surprised that its hotend cooler never turns off. Another downside was the inductive sensor. I had an EBB42 in my stash, which I had long wanted to use for my heavily modified Anet A8 plus,…
It so happened that I got a universal 7" HDMI touch screen with the printer, but it was without a mount and was just lying around, which was inconvenient. I also needed to monitor the long printing process and make timelapses, so I bought…
On all my printers I'm used to using tennis balls instead of a 3D printer foot. It's very convenient, sometimes even beautiful, and isolates the printer sounds from the table well. Recently I got my hands on one of the very first KLP1s…
An extension cord version using the KINGROON filament spool. Additional fasteners are used during assembly, as the printed threaded parts do not provide the required strength during use. Print settings: Material: PETG Layer - 0.2 mm Wall…
Holder for small filament coils for Kingroon KP3S. NOT FOR SPOOLS. Very flimsy, but it works like a piece of solution. Limiting bars should be longer. Works by miracle, should be better. Once I'll make v2. Watch your model. I have nothing…
I printed it flat on the K1 build plate with no supports, 100% infill.
This is a weight holder for spools. It is intended to be used in the BambuLab AMS. When the spools get low on filament they sometimes lift up when filament is being pulled from them. With this inserted it helps the spools roll as…
This is a remix of two KP3S (Pro) hotends, to have better probe mounts and fit to the KP3S
Summary This is the tool holder fitted to Kingroon KLP1. Print Settings Printer brand: Kingroon Printer: Kingroon KLP1 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm Infill: 20% Filament brand: Kexcelled Filament color: Black…
After I uploaded my Bone-Extruder-Cover using Voronoi patterns I was asked for a clean STEP file for customization… and here it is 😉 Feel free to contact me if you find flaws or need some other improvements. Print it “face down”. The Hole…
Kingroon's support came through and provided me with the stl file for the KLP1 230 fan duct. Figure I upload it here to save everyone the trouble.
StealthburnerをKingroon KP3S Pro V2に取り付けられるようにするためのパーツです。 既存のモデルは、z軸のセンサーが取り付けられず、y軸方向に分厚いので新しく作り直しました。 あんまり検証していません。
Kingroon KLP1 230 fan duct mod for 5015 fan Print without supports
This is a Kingrun paper spool adapter. Threads can be printed a little messy There is no problem with use at all. Don't use it right away, combine it to the end, and untie it and use it. When using, completely combine with each other,…
Mount for CR Touch, Klipper Direct Drive Conversion. Printed in PETG
is a orbiter extruder with red lizard k1 based on LM orbiter 2.0 v6
Update: 9/28/24: I redesigned this since I had an issue that the opening was still too big and the PTFEtubing was pulled through it. I made the diameter of the opening smaller than the PTFE tubing. I Purchased the Kingroon filament dry…
Fan shroud for 15mm CPAP hose. You need to cut the rubber end off the CPAP hose and connect the raw hose directly to the inlet. Added custom beam and clamp to help secure the CPAP hose. Use 2x 6mm M3 screw to secure the clamp to the beam.…
The filaments from Kingroon are affordable and affordable products that show moderate quality. I wanted to buy a Refill product and utilize a Refill Spool made by someone else because I didn't want to waste it, but now I realize that the…
Print at 0.24mm layer height and below.
No supports, brim only side with stop facing on the bed. I have added a slot because my LED strip glue was not good and I have made it in order to print or buy a Hard Slot Cover of 6mm. I have bought clear cover from here:…
Hello. This is Kingroon KP3s spool holder. I used 4 walls and 30% infill for better strenght. It is small enough to be printed on Kingroon KP3s. The clearance is little tigh but it goes together with little force. It holds together very…
Two models. One whole, the second divided into two parts for printing on Bambu P1. After the mosque can be glued.
Cooling duct to replace the original that melted on me. Installation The screw holes are hexagonal. You can use the screws from the duct to form thread into them. My strat is to start digging it in one or two turns, then wiggle back and…
This guide clips on top of the Z-axis support tower. Insert small piece of the PTFE tubing into the diagonal slot on top of the guide. It helps to route filament from the spool to the printhead. Using the original reverse Bowden setup…
With this base you can use the same mod created by LMaker for the kp3s on the kp5l. You don't need any additional screws, just replace the original base of the kp5l and mount it. To assemble the X tension band, you will need 2X M4 nuts .…
This is the reference size of the THR 2.0, I made it with a plastic caliper, so it may have a little variation from the real one, it is just a template not in detail, but it can serve as a reference to make some mod.
Kingroon KP3s Pro - Z Stabilizer Bracket to stabilize and stiffen the Z axis of our Kingroon KP3S Pro and Pro S1. It is a very simple design to print and install. I have removed the two screws from the access cover and the axis remains…
Kingroon KP3s Pro- Hula mount This piece is made to used with the HULA design. I only designed the center part, the other parts of Hula you can download in the next link: Original HULA design:…
Kingroon KP3s Pro V2 - Z Stabilizer Bracket to stabilize and stiffen the Z axis of our Kingroon KP3S Pro V2. It is a very simple design to print and install. I have removed the two screws from the access cover and the axis remains very…
Mount filament sensor to your Kingroon KP3S Pro V2 and rework filament path to eliminate spool & X axis jerking caused by moving print head. This model designed around following sensor:…
Like many owners of this wonderful Kingrun KP3S 3D printer, I am tired of the PSU that took up extra space on my table. A quick search on Thingiverse gave me an option that I liked in almost every way. It is a really ergonomic and…
The other day, i saw the AWESOME TNTBA Anti-vibration Feet created by TryNotToBreakAnything. And i wanted to try it on my Kingroon KLP1. So, i made an adapter. The adapter should be compatible with ANY printer that uses simple round feet…
The mount easily installed by just putting it in the leftmost edge of the Y-axis. The camera is facing the extruder in the direction of the Y-axis. In order to use the camera in this position, you first need to print and install a Focus…
Standard Quality: 0,2mm Oben/Unten: Linie Unteres Muster für erste Schicht: Konzentrisch Füllung: 10-15% Erste Schicht Geschwindigkeit: 5mm/s Druckplattenhaftung: Skirt Stützstruktur: Aus Material: PLA
I found a very bright light made to A1 mini in aliexpress. Its very cheap, needs 24v and a switch. I decided to adapt it to my kp3s pro. The item is: Tira de luz Led de relleno para impresora 3D, tira de luz especial para laboratorio de…
Use the wedge to find the post for the bed screws, pinch against the bed, then mark a line on the magnetic sheet. Mark from multiple angles to find the intersect. Use a 2mm drill to free up the screw holes. The screws use 2.5mm allen…
Kingroon KP3s Pro V2 - Fan duct This design is created to use standard 5015 fans. Inprove your layer fan and increase nozzle visibility. Note: This version is for the newest extruders Entoy it!!
Moved screw hole 1 mm to back, added heat insert hole for popular M3x5x4 (Voron). OnShape: https://cad.onshape.com/documents/eee85520aa8ce6563d963da5/
Hi, I remixed @APD_2703754 c270 holder to fit cable holder from this files: https://www.printables.com/model/968636-kingroon-kp3s-pro-v2-cable-holder. I also added classy ;) writing on it :) It will probably fit more camera models,…
Remixed model so that brass inserts are not necessary. Instead of three brass inserts, it is now for direct screwing with m3 screws. Nothing else has been changed.
This printer is quite modern, it has a magnetic base and replaceable PEI plates, but the table does not have guides, as is done in current printer models. These guides allow you to quickly and accurately install the plate on the table:…
Nozzle Wiper Model for Kingroon KP3S 3D Printer Using Bamboo Lab A1 Sticker This nozzle wiper model is designed specifically for the Kingroon KP3S 3D printer, optimized for use with the Bamboo Lab A1 sticker. This model will help improve…
Merged KP3S 3.0 with updated PRO mount parts from LMaker with ADXL mount holes and inserts, this mount made for TZ V6 hotend. Haven't tried it with V6 and V6 revo, maybe they will fit too I don't know. Offset BLtouch X=16.65 Y= -39.65 For…
This is a cooling duck for the Kingroon titan aero add on. This should be a drop in replacement for the original one. I printed this one out of ASA as it is located super close to the heat block.
Case für Knomi v2: https://www.printables.com/model/1086254-k1k1-maxk1c-mk6mk7-skeletor-knomi-v2-mount
Bessere Empfang und ordentlich platzieren.
During operation, the printer emits various vibrations, and when the end switch touches the limiter, it slightly rotates. All these vibrations lead to the end switch being twisted, nothing holds it, since the spring is very short. Because…
I think this duct design is at it's core one of the better options you can find for this printer. It does have overhangs though that would be prone to sagging. I made a version with basically identical dimensions, but with chamfers that…
This remix adds small tolerances (0.1) to carriage fork holes, and extends some faces so thin element become stronger. It is better to use sandpaper or needle file on contacting surfaces (on base's guide and slider)
Typically, the sensor is attached to the casing, the peculiarity of this project is that the sensor is attached to the inductive sensor, which is installed from the plant. This mount does not interfere with the casing and allows…
An additional element for a very successful mounting of the fan from this project https://www.printables.com/model/909825-klp1-extruder-fan-mount-remixed-updated Adds another holder attachment point and cable fixation for MKS THR. Add…
Thumbwheel lock for Kingroon KP3 with a little Mod to give enough gap for Silicon Bed Spacers
Marlin 2.1 Kingroon KP3S mks_robin_nano_v1_3_f4 STM32F407VET6
This adapts a 80mm fan into the 40mm hole which has the nozzle exhaust chamber. I haven't got it working as the fan it's replacing is 24v and I don't know how to get 12v power to the fan. Check my other model which is the nozzle exhaust:…
A replacement nozzle cooling system with a duct to fit an 80mm fan. Haven't tried it yet as I'm looking for a way to convert 24v to 12v for the fan. Check out my other model for the fan Duct:…
Since I live in an area with high humidity, it was necessary to get a filament dryer. However, due to the limited space on my shelf, the best option was to make use of the wall, so I needed a way to mount it there. This model is easily…
With this duct fan for Kingroon KLP1 230 I had a print qualaty improvement over the stok one. Printed in 0.2 layer hight. Need support just over a small part of the print.
Big Tree Tech (BIQU) Microprobe Mount for the Kingroon KP3S V3.0 Designed to work with: Kingroon KP3S 3.0/PRO mod for E3D V6 / Bambu Lab Hotend https://www.printables.com/model/382202-kingroon-kp3s-30pro-mod-for-e3d-v6-bambu-lab-hoten…
To improve the cooling system, I designed a custom setup for two 40 mm fans. Assembly is very simple – you only need to attach the air diffuser to the print head at two points. Everything else is just a matter of easy connections. I'm…
One of our members kindly sent us 2 Kingroon KP3S Pro V2 3D printer so we could take precise measurements and create a full CAD model. This will help us design and adapt new toolheads and upgrades specifically for this machine. We’re…
An inexpensive full upgrade of the hotend with less than $20 total cost for Kingroon KP3S 3.0, Pro and S1. It's based on TZ Bambu clone hotend with V6 adapter and BMG clone dual gear extruder, but stock Titan can be used. Remember the BMG…
This is a mount to hold a light for the Kingroon KP3S Pro V-2. The Wyze cam is just attached with double sided tape. Light is called For 3D Printers KLP1 Upgraded Parts 24V 48W LED Light DIY Lighting Strip Lamps…
Mount for KP3S and KP3S Pro to install the extruder and heater from Bambulab A1/A1 mini. Status “Work-In-Progress”. So far, I haven't been able to come up with and model the cooling, but this task is in the process of being solved.
Raise the top cover 38mm at the front and 120mm at the rear. Include the exhaust fan and filament sensor at the rear. Place the filament tube and cable on top. PLA+
KLP5 TPU Feet – Anti-Vibration Supports for 3D Printers 95A TPU filament, these feet help reduce vibration and noise during printing. Recommended Print Settings: Material: TPU 95A Perimeters: 1 Infill: Low (just enough to maintain…
Attached you can find the assembly instructions and Marlin 2.0.9.2 firmware for this mod. This firmware is for SMT32F1 chip. If you have the last version of Kingroon, you need compiled the firmware for SMT32F4 chip…
用于 Kingroon KP3s Pro V2 喉管散热风扇保护罩 Used for Kingroon KP3s Pro V2 throat cooling fan protective cover
Model was changed to allow LMaker Dual Z rail upgrade
Kingroon KP3S Spool holder mounts to the back left of your printer so you can still utilize the filament run out sensor. Make sure to mount the arm high enough to where your spool doesnt touch your desk. Needs four M3 T nuts to mount into…
Combined Okino and markyrules mix into one to create a dual 5015 hotend for better cooling. literally meshed them in tinker cad. still uses 3 inserts but no insert for the left fan. DONT FORGET TO PRINT THE FAN DUCT FROM Okino TO GLUE TO…
Print head for Kingroon KP3S V3. There is practically no native one, you can assemble it with any available extruder or transfer it to Bowden. You can remake it for your tasks, I attach the step. Короче пользуйтесь, своего кингруна я…
This is a New and Improved design of the Inland Filament spool Axle I previously made. MUCH STRONGER, and again: NO SUPPORTS, NO BRIMS. Simply set your strengths and print! I have printed mine on the K1 Max K2 Plus and on the Ender 3 V3…
Worth mentioning, I took all the measurements from the right side panel but the left one looks about the same. May not fit the newer KLP1 230 model - confirmation is welcome.
I created this 3D print model so you can mount the filament spool holder to the back of the Z-axis. You'll need: 2x M5 bolts (12–15mm in length) 2x T-nuts for Z-axis This print has a height of 1 cm and measures 4 cm in both width and…
Since the main upgrade model is designed to be mounted with M5 bolts, and it’s mentioned that M4 bolts can also be used (see the description of the main model for details), I created this adapter so you can use M4 bolts perfectly with the…
Work in progress. A adapter from THR board to EBB36 board. Needs modified fan shroud. EBB42 should be a better choice.
The original model fits well and was the only one I could find for the KP3S version 3.0. However, in my setup, the extra 2 cm at the back were hitting the wall behind the printer, and the cable support was too tall. So, I made this…
It is a remix of the orbiter extruder for the kingroon KP3s, https://www.prusaprinters.org/prints/129375-kingroon-kp3s-direct-drive-orbiter-extruder-v6 In this case the housings have been adapted for block type H Este es un remix del…
Simply a modification to the angle at which the screen is positioned.
Модель оптимизирована под нагревательный кубик E3D V6 и посадочными отверстиями для вплавляемых гаек. Печатать лучше из ABS/NYLON.
Power Supply Mount (base) for Kingroon KP-3 These are bases functioning as big rubber feet for the power supply of KP-3. The stock power supplies of this printer are in metal cases that normally a power supplies have with it. The problem…
It’s the same model as the original, but instead of using brass heat inserts, M3 nuts are used to secure the fan and att
Adaptador para reemplazar el THR 2.0 de la KLP 230 por un Bigtreetech EBB42. Incluye también una modificación para el ventilador 5020 de la máquina. Lo imprimí en nailon ePA-CF debido a la alta temperatura de la cámara y su proximidad a…
Extender for the 3.5 inch screen. It extends 30mm upfront in order to avoid X axis movement. My toolhead is not original and it is bigger than the original, that is why I've designed the extender.
![[Remix] Kingroon KP3s Pro V2 - Fan duct (redesign (STEP) and reduced (2x STL))](https://media.printables.com/media/prints/20b7aafb-fcc9-420b-af49-b4f14f45c301/images/10859124_8d45adaa-c782-4689-8a4b-a2aa0410be4b_e61b82b1-7094-44b6-8ae3-0af886071564/2025-10-09-23_49_25.jpg)
![KP3S — Modular 5015 Fan Shroud — [STOCK] CPAP TUBE 15mm — Kingroon](https://media.printables.com/media/prints/1034260/images/7845825_caaaaf6f-a62d-423b-b46e-665f7307d731_08c93541-e169-4ac8-8f3a-7dffe75be502/unnamed.jpg)
