1 / 1
Top Handle for 2040 Kingroon KP3 Pro and S1
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sliceworx designed handle for Kingroon KP3 Pro and S1 printers. Can also be used on any printer that has 2040 extrusion
- Ocena
- 4,75 / 5
- Polubienia
- 62
- Pobrania
- 401
- Wydruki
- 4
- Wyświetlenia
- 1476
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 4) (Komentarze: 5)Remiksy (0)Kolekcje (86)Powiązane
SliceWorx design top handle for Kingroon KP3 Pro and S1
Use M5*25 hex cap head or button head screws for mounting this to any printer that has a 2040 extrusion vertical beam.
Print settings:
Orientation: Any flat side
Layer : 0.16 mm
Walls: 3 top and bottom, 4 side
Infill: Minimum 20%
Supports: Not needed
Material: PLA is fine