Kingroon KP3S shroud V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on the original shroud. Mind I'm not a designer so don't blame me for mistakes. Tested and fits the KP3S fan ducts
- Ocena
- 0 / 5
- Polubienia
- 48
- Pobrania
- 309
- Wydruki
- 0
- Wyświetlenia
- 2889
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Updated version 2. Updated the left mounting holes, Made the shell thicker (to 2mm).
All categorized in maps
KP3S Shroud Minimal V2: Minimal design for remix/own version purposes. No fillets were applied. The outlines for the 5015 fan are present so you can add your own design.
KP3S Shroud V2 With slots: Slots are added. Fillets are added. The outlines for the 5015 fan are present so you can add your own design.
KP3S Shroud V2 BL Touch (no slots): Borg-themed ready to print with space for the Kingroon BL Touch design.
KP3S Shroud V2 slots Borg Theme: Borg-themed ready to print. With ventilation slots on both sides, should fit Kingroon BL Touch.
Based on the original shroud. Mind I'm not a designer so don't blame me for mistakes. Tested and fits the KP3S fan ducts (original and designs from other makers). 100% infill for a more rigid print. Printed with the fan inlet on the build plate. There are 3 designs with a Star Trek Borg theme. I provided also the step files if you want to design your own air inlet for the front fan.
Printer: Kingroon KP3S
Rafts: No
Supports: No
Resolution: 0.12 - I printed at 0.28 with good results
Infill: 100% (for rigidity)
Filament brand: eSUN
Filament material: PLA+