P
Printables
Napinák na Kp3S
Upravený napínák pro KP3S
Wyniki wyszukiwania: kp3s
Liczymy pasujące modele…
P
Printables
![[Remix] Kingroon KP3s Pro V2 - Fan duct (redesign (STEP) and reduced (2x STL))](https://media.printables.com/media/prints/20b7aafb-fcc9-420b-af49-b4f14f45c301/images/10859124_8d45adaa-c782-4689-8a4b-a2aa0410be4b_e61b82b1-7094-44b6-8ae3-0af886071564/2025-10-09-23_49_25.jpg)
[Remix] Kingroon KP3s Pro V2 - Fan duct (redesign (STEP) and reduced (2x STL))
I think this duct design is at it's core one of the better options you can find for this printer. It does have overhangs though that would be prone to sagging. I made a version with basically identical dimensions, but with chamfers that…
P
Printables
Kingroon KP3S Spool holder
Kingroon KP3S Spool holder mounts to the back left of your printer so you can still utilize the filament run out sensor. Make sure to mount the arm high enough to where your spool doesnt touch your desk. Needs four M3 T nuts to mount into…
P
Printables
KP3S Dragon Burner X-Carriage (MGN12C MOUNT)
Support: Need (some area) Infill: 40% Wall line: 4
P
Printables
Kingroon KP3s spool holder
I remixed a spool holder for my Kingroon KP3s There are two remix versions. V1.1 got tilted and is a bit longer than the original and fits on the printbed of a KP3s. V1.2 doesn't fit on the print bed of a KP3s so I printed it on my X1. It…
P
Printables
Kp3s Pro v1 Bed Tramming Caliper Holder
Works well with my Hoteche 284315. It’s easily adjustable using the SCAD file. Printed with 3.2 layer height.
P
Printables
Fan duct Kingroon KP3S (e3d v6 hotend, titan extruder)
Double‑outlet fan duct for a modified E3D v6 hotend (titan extruder) Filament: PETG or ABS Supports: No Raft: No Resolution: 0.2 Important: set variable layer heights so that the air outlets print correctly P.S. Be aware: the model has…
P
Printables
Flimsy filament holder for Kingroon KP3S
Holder for small filament coils for Kingroon KP3S. NOT FOR SPOOLS. Very flimsy, but it works like a piece of solution. Limiting bars should be longer. Works by miracle, should be better. Once I'll make v2. Watch your model. I have nothing…
P
Printables
KP3S Y-axis cable guide
Add a little directivity to the Y-axis cable of KP3S. It also serves as a guide for spring steel bed surfaces. Two M3 heat insert nuts are required, but there is a hole for mounting the ADXL345. Please print with heat resistant filament…
P
Printables
KP3s Pro V2 - Webcam support
KP3s Pro V2 mini webcam support, no arms, compact design. You can see your printer and make timelapse. It is easy to mont, you only need removed de pull cover, and mount the printer part with the same screws. To fixed the extruder wire…
P
Printables
Kingroon KP3S Orbiter V2 + V6 hotend remix
This is a remix of two KP3S (Pro) hotends, to have better probe mounts and fit to the KP3S
P
Printables
Stealthburner for KINGROON KP3S Pro V2
StealthburnerをKingroon KP3S Pro V2に取り付けられるようにするためのパーツです。 既存のモデルは、z軸のセンサーが取り付けられず、y軸方向に分厚いので新しく作り直しました。 あんまり検証していません。
P
Printables
KP3S 3.0 DRAGON BURNER MGN12C MOUNT
Mounting bracket for dragon burner on MGN12C linear rail with X limit switch stop bar. Modified mounting holes for MGN12C hole distance. Moved them down a bit as well, so you can access the dragon burner mounting screws from the rear of…
P
Printables
kingroon kp3s orbiter 2.0 red lizard k1
is a orbiter extruder with red lizard k1 based on LM orbiter 2.0 v6
P
Printables
EVA 3 KP3S
KP3S X carriage plate adapter and EVA 3 modified parts. I lost 15mm of left side on X axis with this mod (and Z linear rails mod ). It is designed for sensorless homing - carriage hits right screw of X-to-Z axes mount. OnShape:…
P
Printables
KP3S Pro V2 DIY filament runout sensor
Install as per the picture, recommend to have 2 sections of PTFE tube inserted in both ends of the filament path to protect the cradle from wear. 29/9/24: added v21 which has a tighter cable grip, also download the cover which is not…
P
Printables
KP3s Pro V2 Broken material detector pivot bracket
For the bracket, i have used 20% filament, and for the sensor mount, 70% with 45% angle to be more durable. You will need two M3 hex nuts, two M3x8 screws, and one 608 bearing.
P
Printables
![KP3S — Modular 5015 Fan Shroud — [STOCK] CPAP TUBE 15mm — Kingroon](https://media.printables.com/media/prints/1034260/images/7845825_caaaaf6f-a62d-423b-b46e-665f7307d731_08c93541-e169-4ac8-8f3a-7dffe75be502/unnamed.jpg)
KP3S — Modular 5015 Fan Shroud — [STOCK] CPAP TUBE 15mm — Kingroon
Fan shroud for 15mm CPAP hose. You need to cut the rubber end off the CPAP hose and connect the raw hose directly to the inlet. Added custom beam and clamp to help secure the CPAP hose. Use 2x 6mm M3 screw to secure the clamp to the beam.…
P
Printables
Cable Thing remix for Kingroon KP3S Pro V2 THR CAN cable
Print at 0.24mm layer height and below.
P
Printables
Kingroon KP3S spool holder by Miko_Art
Hello. This is Kingroon KP3s spool holder. I used 4 walls and 30% infill for better strenght. It is small enough to be printed on Kingroon KP3s. The clearance is little tigh but it goes together with little force. It holds together very…
P
Printables
KP3S - Cable Guide
Original design made to guide the hotend cable of K3PS printer. It allows the movement, limiting but without fixing it.
P
Printables
Simple Cooling Duct for Kingroon KP3S V2
Cooling duct to replace the original that melted on me. Installation The screw holes are hexagonal. You can use the screws from the duct to form thread into them. My strat is to start digging it in one or two turns, then wiggle back and…
P
Printables
Bambu Lab A1 hot end mounted on KP3S
When using the Bambu Labs A1 parts cooler I need to disassemble it, take out the board and transplant the 5015 blower. I could not work out how to wire the 4 wire fan to the kp3s. It might be easier to design a bracket to mount the 5015…
P
Printables
Filament Guide for Kingroon KP3S Pro V1
This guide clips on top of the Z-axis support tower. Insert small piece of the PTFE tubing into the diagonal slot on top of the guide. It helps to route filament from the spool to the printhead. Using the original reverse Bowden setup…
P
Printables
Kingroon KP5L - Base for using the KP3S BMG mod
With this base you can use the same mod created by LMaker for the kp3s on the kp5l. You don't need any additional screws, just replace the original base of the kp5l and mount it. To assemble the X tension band, you will need 2X M4 nuts .…
P
Printables
Kingroon KP3s Pro - Z Stabilizer
Kingroon KP3s Pro - Z Stabilizer Bracket to stabilize and stiffen the Z axis of our Kingroon KP3S Pro and Pro S1. It is a very simple design to print and install. I have removed the two screws from the access cover and the axis remains…
P
Printables
Sharpie Plotter Adapter KP3S
Loved the attachment by Three Ducks in a Bear Suit and decided to make a simple adaptor so that the same holders could be used on my KP3S that I had lying around. It needs 2 M4x6mm screws to replace the ones that are holding the shroud in…
P
Printables
Kingroon KP3s Pro S1 / V2- Hula mount
Kingroon KP3s Pro- Hula mount This piece is made to used with the HULA design. I only designed the center part, the other parts of Hula you can download in the next link: Original HULA design:…
P
Printables
Kingroon KP3s Pro V2- Z Stabilizer
Kingroon KP3s Pro V2 - Z Stabilizer Bracket to stabilize and stiffen the Z axis of our Kingroon KP3S Pro V2. It is a very simple design to print and install. I have removed the two screws from the access cover and the axis remains very…
P
Printables
Kingroon KP3S Pro V2 filament sensor mount
Mount filament sensor to your Kingroon KP3S Pro V2 and rework filament path to eliminate spool & X axis jerking caused by moving print head. This model designed around following sensor:…
P
Printables
KINGROON KP3S base with built-in PSU and tool storage box
Like many owners of this wonderful Kingrun KP3S 3D printer, I am tired of the PSU that took up extra space on my table. A quick search on Thingiverse gave me an option that I liked in almost every way. It is a really ergonomic and…
P
Printables
FAN DUCT SOLUTION FOR KP3S PRO V2 (Remix original model)
Adapté el modelo con el ventilador original. Ahora encaja bien.
P
Printables
KP3S Y-axis Cable chain
Tools Needed: Crimping Tool Wire Strippers Wire Cutters 2mm&2.5mm Hex Keys Ferrule Crimping Tool (optional) Soldering Iron Lighter, Heat Gun, or other tool for melting heatshrink BOM: name quantity M3x8mm screw 7 M3 washer 2 JST XH 2-pin…
P
Printables
Logitec C270 mount for Kingroon KP3S v2
The mount easily installed by just putting it in the leftmost edge of the Y-axis. The camera is facing the extruder in the direction of the Y-axis. In order to use the camera in this position, you first need to print and install a Focus…
P
Printables
KingRoon KP3S PSU Fan Cover 70mm
Standard Quality: 0,2mm Oben/Unten: Linie Unteres Muster für erste Schicht: Konzentrisch Füllung: 10-15% Erste Schicht Geschwindigkeit: 5mm/s Druckplattenhaftung: Skirt Stützstruktur: Aus Material: PLA
P
Printables
KP3S Front Fan Cover
Standard Quality: 0,2mm Oben/Unten: Linie Unteres Muster für erste Schicht: Konzentrisch Füllung: 10-15% Erste Schicht Geschwindigkeit: 5mm/s Druckplattenhaftung: Skirt Stützstruktur: Aus Material: PLA
P
Printables
Kingroon KP3S PRO A1 MINI LIGHT ADAPTER
I found a very bright light made to A1 mini in aliexpress. Its very cheap, needs 24v and a switch. I decided to adapt it to my kp3s pro. The item is: Tira de luz Led de relleno para impresora 3D, tira de luz especial para laboratorio de…
P
Printables
kp3s screen angler V2
if you have any questons feel free to ask make sure to upload makes :)
P
Printables
KP3S Pro + TZ V6 Hotend parts
The KP3S Pro is in an odd situation, missing alot of QOL features found on the V2 model. Almost no tutorials exist for these printers on upgrading them. The TZ V6 hotend presents another challenge, as its shorter height causes collisions…
P
Printables
KP3S Pro BLTouch Mount
This model fixes the model to prevent design flaws that inhibit printing the part. A separate version is included which is designed to improve compatibility with the TZ V6 hotend. The part was also inverted, slightly flattened, and given…
P
Printables
Center Finder for Kingroon KP3S Pro V2 Bed Screws
Use the wedge to find the post for the bed screws, pinch against the bed, then mark a line on the magnetic sheet. Mark from multiple angles to find the intersect. Use a 2mm drill to free up the screw holes. The screws use 2.5mm allen…
P
Printables
Kingroon KP3s Pro V2 - 5015 Fan duct
Kingroon KP3s Pro V2 - Fan duct This design is created to use standard 5015 fans. Inprove your layer fan and increase nozzle visibility. Note: This version is for the newest extruders Entoy it!!
P
Printables
KP3S Pro V2 Extruder Cover
Just a plain printable extruder cover for the Kingroon KP3SPro-V2
P
Printables
Kingroon KP3S v3 belt tensioner for x-axis - heat insert remix
Moved screw hole 1 mm to back, added heat insert hole for popular M3x5x4 (Voron). OnShape: https://cad.onshape.com/documents/eee85520aa8ce6563d963da5/
P
Printables
Kingroon KP3S Pro v2 camera holder (Logitech C270)
Hi, I remixed @APD_2703754 c270 holder to fit cable holder from this files: https://www.printables.com/model/968636-kingroon-kp3s-pro-v2-cable-holder. I also added classy ;) writing on it :) It will probably fit more camera models,…
P
Printables
KP3S Pro V2 Feet
Seems that the printer would rotate clockwise if conditions were right (mainly during input shaper calibration), so I made these feet to increase the friction. Not sure how crucial this really is but the printer no longer moves during…
P
Printables
Kingroon KP3S 3.0/PRO mod for stock Titan extruder
Remixed model so that brass inserts are not necessary. Instead of three brass inserts, it is now for direct screwing with m3 screws. Nothing else has been changed.
P
Printables
Kingroon KP3S Pro V2 Plate Guide
This printer is quite modern, it has a magnetic base and replaceable PEI plates, but the table does not have guides, as is done in current printer models. These guides allow you to quickly and accurately install the plate on the table:…
P
Printables
kp3s orbiter 2.0 filament cutter
filament cutter to mmu easy changes. tolhead art cutter blades n4 x1 916 screw m3x5 x2 (close cutter upper hotend fan) 916 screw m3x16 x2 (articulate cutter) 7630/912 screw m3x30 x2 (hotend fan mount) 7630/912 screw m3x20 x2 (ob2 mount)…
P
Printables
Wiper Model for Kingroon KP3S. Clean nozzle mod.
Nozzle Wiper Model for Kingroon KP3S 3D Printer Using Bamboo Lab A1 Sticker This nozzle wiper model is designed specifically for the Kingroon KP3S 3D printer, optimized for use with the Bamboo Lab A1 sticker. This model will help improve…
P
Printables
KINGROON KP3S 3.0 BMG, TZ V6 (Bambu style V6 hotend) mount
Merged KP3S 3.0 with updated PRO mount parts from LMaker with ADXL mount holes and inserts, this mount made for TZ V6 hotend. Haven't tried it with V6 and V6 revo, maybe they will fit too I don't know. Offset BLtouch X=16.65 Y= -39.65 For…
P
Printables
Halterung Knomi v2 für Kingroon KP3S
Case für Knomi v2: https://www.printables.com/model/1086254-k1k1-maxk1c-mk6mk7-skeletor-knomi-v2-mount
P
Printables
Antenne Halterung von Knomi v2 für Kingroon KP3S
Bessere Empfang und ordentlich platzieren.
P
Printables
Z-axis limiter spacer for Kingroon KP3S
During operation, the printer emits various vibrations, and when the end switch touches the limiter, it slightly rotates. All these vibrations lead to the end switch being twisted, nothing holds it, since the spring is very short. Because…
P
Printables
[Remix] Kingroon KP3s Pro V2 - Fan duct (redesign (STEP) and reduced (2x STL))
I think this duct design is at it's core one of the better options you can find for this printer. It does have overhangs though that would be prone to sagging. I made a version with basically identical dimensions, but with chamfers that…
P
Printables
KP3S BMG V6 BLTouch Printhead
UPDATE: V3.8 added +3mm on Y. BL offset is X-32 Y0, Adjustable (On Y) X belt holder. new STL-s and STP. Printhead for KP3S with BMG/V6/BLTouch and X belt tension. You need: -LH BMG (Mirrored)! (When you have a RH version you can print the…
P
Printables
Kingroon KP3S v3 X-axis belt tensioner (GFF remix)
This remix adds small tolerances (0.1) to carriage fork holes, and extends some faces so thin element become stronger. It is better to use sandpaper or needle file on contacting surfaces (on base's guide and slider)
P
Printables
Kingroon KP3S Pro V2 BLTouch mount
Typically, the sensor is attached to the casing, the peculiarity of this project is that the sensor is attached to the inductive sensor, which is installed from the plant. This mount does not interfere with the casing and allows…
P
Printables
Marlin 2.1 Kingroon KP3S STM32F407VET6
Marlin 2.1 Kingroon KP3S mks_robin_nano_v1_3_f4 STM32F407VET6
P
Printables
BTT MicroProbe mount to suit Kingroon KP3S 3.0
Big Tree Tech (BIQU) Microprobe Mount for the Kingroon KP3S V3.0 Designed to work with: Kingroon KP3S 3.0/PRO mod for E3D V6 / Bambu Lab Hotend https://www.printables.com/model/382202-kingroon-kp3s-30pro-mod-for-e3d-v6-bambu-lab-hoten…
P
Printables
Kingroon KP3S cooling system complete + BL touch holder
To improve the cooling system, I designed a custom setup for two 40 mm fans. Assembly is very simple – you only need to attach the air diffuser to the print head at two points. Everything else is just a matter of easy connections. I'm…
P
Printables
Kingroon KP3S Pro V2 CAD
One of our members kindly sent us 2 Kingroon KP3S Pro V2 3D printer so we could take precise measurements and create a full CAD model. This will help us design and adapt new toolheads and upgrades specifically for this machine. We’re…
P
Printables
Kingroon KP3S inexpensive hotend upgrade
An inexpensive full upgrade of the hotend with less than $20 total cost for Kingroon KP3S 3.0, Pro and S1. It's based on TZ Bambu clone hotend with V6 adapter and BMG clone dual gear extruder, but stock Titan can be used. Remember the BMG…
P
Printables
Kingroon KP3S Pro v-2 Light
This is a mount to hold a light for the Kingroon KP3S Pro V-2. The Wyze cam is just attached with double sided tape. Light is called For 3D Printers KLP1 Upgraded Parts 24V 48W LED Light DIY Lighting Strip Lamps…
P
Printables
Kingroon KP3S, KP3S Pro toolhead frame for Bambu lab A1\A1 min extruder
Mount for KP3S and KP3S Pro to install the extruder and heater from Bambulab A1/A1 mini. Status “Work-In-Progress”. So far, I haven't been able to come up with and model the cooling, but this task is in the process of being solved.
P
Printables
Kingroon KP3S - Orbiter v1.5 + V6 - Direct Drive
Attached you can find the assembly instructions and Marlin 2.0.9.2 firmware for this mod. This firmware is for SMT32F1 chip. If you have the last version of Kingroon, you need compiled the firmware for SMT32F4 chip…
P
Printables
Kingroon KP3s Pro V2 throat tube cooling fan protective cover
用于 Kingroon KP3s Pro V2 喉管散热风扇保护罩 Used for Kingroon KP3s Pro V2 throat cooling fan protective cover
P
Printables
Remix of Kingroon KP3S Spool Holder for LMaker Dual Rail Mod
Model was changed to allow LMaker Dual Z rail upgrade
P
Printables
Kingroon KP3S Spool holder
Kingroon KP3S Spool holder mounts to the back left of your printer so you can still utilize the filament run out sensor. Make sure to mount the arm high enough to where your spool doesnt touch your desk. Needs four M3 T nuts to mount into…
P
Printables
KingRoon KP3S, Mini Sherpa, nf crazy hotend, dual 5015
Combined Okino and markyrules mix into one to create a dual 5015 hotend for better cooling. literally meshed them in tinker cad. still uses 3 inserts but no insert for the left fan. DONT FORGET TO PRINT THE FAN DUCT FROM Okino TO GLUE TO…
P
Printables
Kingroon KP3S TollHead
Print head for Kingroon KP3S V3. There is practically no native one, you can assemble it with any available extruder or transfer it to Bowden. You can remake it for your tasks, I attach the step. Короче пользуйтесь, своего кингруна я…
P
Printables
KP3S Sherpa heavy plate
# 필요한 것 @* BMG 부품 @## 인쇄 @* 플레이트 @* 셰르파 엑스트라 헤비 @* 스텔스 버너(클락워크 관련 아님)
P
Printables
Alignment spacer between filament spool holder and Z-axis for Kingroon KP3S Pro V2
I created this 3D print model so you can mount the filament spool holder to the back of the Z-axis. You'll need: 2x M5 bolts (12–15mm in length) 2x T-nuts for Z-axis This print has a height of 1 cm and measures 4 cm in both width and…
P
Printables
M4 screw adapter for Kingroon (KP3S PRO S1 / KP3S PRO V2 Dual Rail Z-Axis MOD)
Since the main upgrade model is designed to be mounted with M5 bolts, and it’s mentioned that M4 bolts can also be used (see the description of the main model for details), I created this adapter so you can use M4 bolts perfectly with the…
P
Printables
KP3S bed webcam mount
BOM: M3 - over6.4mm x3 Print Settings: Material: PLA Layer height: 0.2mm Supports: Not required Infill: 15%
P
Printables
Titan Aero mount for KP3S
No additional hardware required, but you will need to splice the wires to the original part cooling fan if you also want to upgrade to a 40mm clear fan for the Aero heatsink. I did this instead of routing a new wire to the mainboard…
P
Printables
Kingroon KP3s 3.0 bed cable support
The original model fits well and was the only one I could find for the KP3S version 3.0. However, in my setup, the extra 2 cm at the back were hitting the wall behind the printer, and the cable support was too tall. So, I made this…
P
Printables
Mini Stealth for KP3S
a remix for mini stealth toolhead, it mounted using 4 m3x8 screw to the rail block, for mounting the cores, especially rigid cores bc why not? you need 2 m3x45 screw, 2 m3x10 screw and 4 m3 heat insert, any m3 inserts should work and the…
P
Printables
KP3S Dragon burner mount with EDDY COIL
I modified original to avoid interference with the LM block. Eddy mount is designed with support at a 0.08mm spacing. M3 x 6 Socket head screw *2 (Dragon burner ← Dragon burner mount) M3 x 12 Socket head screw *2 (Dragon burner ← EDDY…
P
Printables
Remix Kingroon KP3S - Orbiter V1.5 + V6 - Direct Drive
It is a remix of the orbiter extruder for the kingroon KP3s, https://www.prusaprinters.org/prints/129375-kingroon-kp3s-direct-drive-orbiter-extruder-v6 In this case the housings have been adapted for block type H Este es un remix del…
P
Printables
Bambu Lab A1 Hotend for KP3S
This is also a remix of this fan holder https://www.thingiverse.com/thing:6294557, which I think was also a remix from other model, and this fanduct https://www.printables.com/model/327262-kingroon-kp3s-fan-duct I adjusted the bracket so…
P
Printables
KP3S 50mm fan upgrade
The original heatsink fan for my KP3S failed, and it was quite noisy, so this new cage allows a 50x50x10 mm fan to be installed instead. When using appropriate screw length for the fan, it will not hit anything, but there is not much…
P
Printables
KINGROON KP3S LCD DISPLAY ORIGINAL ANGLED
Simply a modification to the angle at which the screen is positioned.
P
Printables
Kingroon KP3S fan duct
Модель оптимизирована под нагревательный кубик E3D V6 и посадочными отверстиями для вплавляемых гаек. Печатать лучше из ABS/NYLON.
P
Printables
KP3s Pro Heatbed cable cover with integrated PEI sheet guide
This mod for the KP3s Pro strengthens the hotbed cable connection and simultaneously helps install magnetic PEI sheets (or other types). You'll need two M3x8 screws and nuts. You'll also need access to the screws underneath the magnetic…
P
Printables
KP3S PRO V2 Dual Rail Z-Axis MOD
The X-axis holder is extended for the V2 version and moved 2 mm to +y. Unlike the original, I did not use the upper portal, as it was not needed. The 2040 profile 350mm was retained.
P
Printables
Kingroon KP3S 3.0/PRO mod for stock Titan extruder modificated
It’s the same model as the original, but instead of using brass heat inserts, M3 nuts are used to secure the fan and att
P
Printables
Extender for RPI Zero 2W screen for Kingroon KP3s
Extender for the 3.5 inch screen. It extends 30mm upfront in order to avoid X axis movement. My toolhead is not original and it is bigger than the original, that is why I've designed the extender.
P
Printables
Kingroon KP3S - Orbiter V2.0 + V6 - Direct Drive
Attached you can find the assembly instructions and Marlin 2.0.9.2 firmware for this mod. This firmware is for SMT32F1 chip. If you have the last version of Kingroon, you need compiled the firmware for SMT32F4 chip…
P
Printables
KP3S Bambu Hotend Upgrade
I decided to upgrade my KP3S Pro to use a clone BambuLab hotend to make it easier to maintain and swap nozzles (especially since I've standardized on Bambu clone hotends due to their amazing efficiency), and while looking for a new hotend…
P
Printables
KP3S Bed leveling knob
Bed leveling knobs for KP3S with self-locking mechanism with 0.01mm step per click Print 3 inserts and 1 top left insert since bed carriage is asymmetrical 4 x M3 nuts are required for installation
P
Printables
KP3S Pro Bed leveling knob
Bed leveling knobs for KP3S Pro and S1 with self-locking mechanism with 0.01mm step per click Don't forget to remove the top screw from from Y axis endstop or replace it with flat headed screw 4 x M4 nuts are required for installation
P
Printables
Kingroon KP3S - BMG + V6 -Direct Drive
Attached you can find the assembly instructions and Marlin 2.0.9.2 firmware for this mod. This firmware is for SMT32F1 chip. If you have the last version of Kingroon, you need compiled the firmware for SMT32F4 chip…