kp3s / kp3s pro LeftPanel for 4020 fan M4 with FanGrill
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
1,08 € – 1,32 € netto (bez VAT)
Dla pliku: 4020_0.4nozzle_0,28layer_240t.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 1,20 € netto (środek widełek).
- Masa podana przez autora
- 16 g
- Czas druku podany przez autora
- 1,2 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Remix of left panel with grill and m4 screw holes to fit 4020 fans. Some fitting problems.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 661
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Remix of KP3S — Modular 4010/5015 Fan Shrouds with BLTouch Mount — Kingroon left panel with grill and m4 screw holes to fit 4020 fans.
Some fitting problems. You should use +10mm longer screws on the left side.
I advise you to use screws with a flat cap to prevent collisions with the cover of the filament sensor. There are two ways to solve the problem of not triggering the X-axis stop sensor:
- cut down part of the casing of the filament sensor.
- move or extend the X-axis stop sensor. I used both options together.