GT2 Belt Clip for Kingroon KP3S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reusable clips without damaging the GT2/2GT (width: 6mm) timing belts.
- Ocena
- 5 / 5
- Polubienia
- 222
- Pobrania
- 1076
- Wydruki
- 9
- Wyświetlenia
- 5866
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Reusable clips without damaging the GT2/2GT (width: 6mm) timing belts.
(Although these are designed for the KP3S, they could be used for other applications as well.)
Updated [ September 1, 2022 ]
──────────
A shorter clip has been added. (height: 4.4mm)
For this shorter clip, please use a zip tie of 2mm or less in width.
──────────
It can be used to set the correct belt path for the X and Y-axis of the KP3S.
Furthermore, by using four different clips (type A, B, C, and D), belt tension can be roughly adjusted even for the KP3S without a tensioner.
Please use a zip tie of 3mm or less in width.


