GT2 Belt Clip for Kingroon KP3S
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reusable clips without damaging the GT2/2GT (width: 6mm) timing belts.
- Rating
- 5 / 5
- Likes
- 222
- Downloads
- 1,072
- Makes
- 9
- Views
- 5,853
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Reusable clips without damaging the GT2/2GT (width: 6mm) timing belts.
(Although these are designed for the KP3S, they could be used for other applications as well.)
Updated [ September 1, 2022 ]
──────────
A shorter clip has been added. (height: 4.4mm)
For this shorter clip, please use a zip tie of 2mm or less in width.
──────────
It can be used to set the correct belt path for the X and Y-axis of the KP3S.
Furthermore, by using four different clips (type A, B, C, and D), belt tension can be roughly adjusted even for the KP3S without a tensioner.
Please use a zip tie of 3mm or less in width.


