1 / 2
KINGROON KP3S Adjustable Anti Z Wobble Hat (Open Ver) — zdjęcie 1
1 / 2

KINGROON KP3S Adjustable Anti Z Wobble Hat (Open Ver)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Corrects misaligned z-axis. Remixed from hitoriblog's model that allows for other mods that fit on top of the z-axis.

Ocena
4,5 / 5
Polubienia
49
Pobrania
319
Wydruki
3
Wyświetlenia
2126
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

BOM:

  • 608ZZ ball bearing x1
  • M3 * 20mm screws x2
  • M3 nuts x2
  • M3 washers x2 (optional)

Full details found here on construction and how to actually correct z-axis found here: https://www.thingiverse.com/thing:4748680

Make sure you properly measure the top and bottom z-axis. You can do this easily by locking the caliper after measuring the bottom and fitting it with the top top. You may need extra hands.

hitoriblog recommends no rafts, no supports, 0.2mm and 20% infill using ABS. I managed to get it to work with no rafts, supports (tree), 0.3mm and no infill using PLA. I printed the models upwards, with the flattest parts on the print bed.

Other Related Articles

Japanese

"Z軸の不具合対策 – KINGROON KP3S情報" http://hitoriblog.com/kingroon_kp3s/docs/trouble_shooting/countermeasures_against_z-axis_problems/

Google Translated

"Countermeasures against Z-axis problems - KINGROON KP3S Information" https://translate.google.com/translate?sl=auto&tl=ja&u=http://hitoriblog.com/kingroon_kp3s/docs/trouble_shooting/countermeasures_against_z-axis_problems/

Tagi