1 / 2
KP3S Z axis
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little helper to adjust the Z-axis and KP3S 4020 end cap.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 184
- Wydruki
- 5
- Wyświetlenia
- 1641
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 5) (Komentarze: 6)Remiksy (0)Kolekcje (51)Powiązane
For your KP3S
a little helper to adjust the Z-axis: If you ever struggled with the Z-axis adjustment of your KP3S…then print this helper. Sometimes the spring makes it hard to turn the Z-axis screw. No more need to raise the Z-axis till you can use a screwdriver. raise 30mm and use the helper. Don't let the helper sit after adjusting. (maybe you can but I don't recommend it).
The other design is a 4020 endcap with KP3S name to replace the original.
Printed PLA
100% infill (because it's all small)
Use 0.16mm for best results.