Modifizierter Spulenhalter für Kingroon KP3s modified spoolholder for Kingroon KP3s
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spulenhalter für Kingroon KP3s mit Schraubmontage spoolholder for Kingroon KP3s for mounting with srcews
- Ocena
- 5 / 5
- Polubienia
- 79
- Pobrania
- 580
- Wydruki
- 7
- Wyświetlenia
- 3285
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Allgemeines
Remix des bekannten “Top Mount spoolholder” für den Kingroon KP3s.
Meine Version beinhaltet 3 wesentliche Änderungen:
- der Halter wird fest am Drucker verschraubt (benötigt 2stk M5x20 Innensechskantschrauben)
- der Haltearm wird gegen Herunterfallen gesichert (benötigt 2stk M4x20 Innensechskantschrauben, 2stk M4 Nylock Mutter & 2stk M4 U-Scheiben mit mindestens 12mm Außendurchmesser)
- der Abroller lief mir persönlich zu leicht, daher habe ich einen Abroller ohne Kugellager erstellt und den Arm entsprechend angepasst
Druckeinstellungen
- Drucker: Prusa MK3s
- Schichthöhe: 0,20mm
- Infill: 15-20% Bienenwabe, Gyroid
- Vertikale Perimeter: 3-4
- Decke- & Boden Schichten: 3-4
Material
Zusätzlich wird folgendes Material benötigt:
- 2stk M4x20 Innensechskantschraube
- 2stk M4 Nylock Mutter
- 2stk M4 U-Scheibe mit Außendurchmesser von ca. 12mm oder größer
- 2stk M5x20 Innensechskantschraube
Druckmaterial
- PETG empfohlen
- auf den Bilder:
- Haltearm: ERYONE PETG Carbon Fiber
- Abroller & Basis: Prusament PETG Orange
Vorbereitungen
Um die Basis am Drucker verschrauben zu können, werden auf der Oberseite des Aluprofils der Z-Achse 2stk M5 Gewinde benötigt.

General
Remix from the famous “Top mount spoolholder” for the Kingroon KP3s.
My version contains 3 significant changes:
- the “top cap” get screwed with the printer (you need additional 2pcs M5x20 allen screw)
- the “main arm” gets saved for falling down (you need additional 2pcs M4x20 allen screw, 2pcs M4 nylock hexnut and 2pcs M4 washer with minimum 12mm outer diameter)
- in my pinion the roller runs to smooth so i had every time twists on my filamentroll. I have made a roller without bearings and customize the “main arm” for this roller
Print Settings
- Printer: Prusa MK3s
- Layerheight: 0,20mm
- Infill: 15-20% honeycomb, gyroid
- Vertical Perimeter: 3-4
- Top- & Bottomlayer: 3-4
Material
Additional material you need:
- 2stk M4x20 allen screw
- 2stk M4 Nylock hexnut
- 2stk M4 washer with minimum outer diameter from 12mm or more
- 2stk M5x20 allen screw
Printing material:
- PETG recommended
- on the picture:
- main arm: ERYONE PETG Carbon Fiber
- top cap and roller: Prusament PETG Orange
Preliminary
To screwing the top cap on the printer, you need to cutting two M5 threads in the top of extrusion from the Z-axis.
