Gridfinity Nozzle Bin (Ankermake, volcano, Mk6, Mk8)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact storage solution for printer nozzles.
- Ocena
- 4,935 / 5
- Polubienia
- 147
- Pobrania
- 1131
- Wydruki
- 35
- Wyświetlenia
- 3992
- Oceny
- 31
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a compact way to store spare nozzles, but nothing I found matched all my criteria:
- Gridfinity compatible and stackable
- Compact with maximum storage capacity
- Designed for Ankermake nozzles
This bin will store 16 Ankermake nozzles in a stackable 1x1x4U bin. Since volcano nozzles are pretty close in size, I made the design compatible with them as well. There is also a version with no stacking lip if you don't care about that, which saves a bit of height and plastic. And since I had a working parametric design, I figured I would generate versions for Mk6 and Mk8 nozzles as well (which are slightly non-standard at 2.5U high). Please note that I don't have any Mk6, Mk8 or volcano nozzles at hand, so if you print this bin for use with any of them, I would very much appreciate some feedback to confirm that they work as designed.
To achieve this level of compactness, some sacrifices were made: there are no size labels, and you will most likely need to use rubber-tipped tweezers to take the nozzles in and out.
Updated 2023-10-14: Fixed all models to get rid of potential issues with slicing (thanks to Obelisk89).