Parametric Spring Loaded Painting Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Painting handle for miniature wargaming. Requires you have a spring and M3 stuff. Parametric Fusion360 model included.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Behold, another painting handle. There are many like it but this one is mine.
I made the model parametric so that other people can make it theirs! I didn't make everything parametric, but most of it is.
Should hold a 40mm base with no insert. I made inserts for 25, 28, and 32mm bases (sizes found in Killteam).
Hardware: Spring sizes range from 7mm-pretty much anything for length (don't suggest less than 29mm, otherwise it'll fall out if inserts aren't in), and 10-30mm (probably) diameter.
Needs M3 hardware. 3 bolts 10mm long, and 3 nuts.
Printing: I printed everything 3 walls 10%. Handle out of TPU, rest out of PLA. I printed everything but the main section upside down from how it's exported (insert pieces are upside down for some reason). Slider with supports, you want the little angled rail pieces up so your tolerances don't get messed up. Make sure to add a pause when printing handle to add the nuts. (In prusaslicer you add it on the layer before it starts making the roof above the nuts)