Folding Utility Blade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Folding utility blade with wire stripper
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 735
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple folding utility knife!
V1 DOES NOT LOCK IN OPEN POSITION - USE WITH CAUTION
Designed to stay locked well in closed position, to prevent from opening while its in your pocket. I have also included a wire stripper (using the cut-out for the thumb stud. For left-handed users, you will need to mirror both handles, aswell as the blade frame.
You will need to print the following:
- 1x Blade Frame
- 2x Blade Pin
- 2x Male Pivot
- 2x Female Pivot
- 1x Left Handle
- 1x Right Handle
- 1x Locking Bar
Assemble pieces, gluing in the locking bar to the back of the handle. I suggest applying glue between 70-90% of the length of the bar, to increase strength.
The Blade Frame should be printed flat on its side, with tree supports. This will need to be cleared out well with a pick or similar small object to ensure the blade fits snugly into the frame. The blade is then locked into place with the two blade pins.