Folding Utility Blade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Folding utility blade with wire stripper
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 82
- Makes
- 0
- Views
- 735
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple folding utility knife!
V1 DOES NOT LOCK IN OPEN POSITION - USE WITH CAUTION
Designed to stay locked well in closed position, to prevent from opening while its in your pocket. I have also included a wire stripper (using the cut-out for the thumb stud. For left-handed users, you will need to mirror both handles, aswell as the blade frame.
You will need to print the following:
- 1x Blade Frame
- 2x Blade Pin
- 2x Male Pivot
- 2x Female Pivot
- 1x Left Handle
- 1x Right Handle
- 1x Locking Bar
Assemble pieces, gluing in the locking bar to the back of the handle. I suggest applying glue between 70-90% of the length of the bar, to increase strength.
The Blade Frame should be printed flat on its side, with tree supports. This will need to be cleared out well with a pick or similar small object to ensure the blade fits snugly into the frame. The blade is then locked into place with the two blade pins.