Counting matching models…
A dagger that has a triangular blade thats twisted. Model was requested by User “rattus” on Makerworld. The blade is 210 mm tall on the printbed, so if you want to print it on smaller printers, you will need to scale it down If there are…
I would appreciate a lot if you could support me giving a like and downloading, thank you guys. You can also visit my profile and suport my other 3D models. Check out my latest models: https://www.printables.com/model/1024242-scream-duck
About the model: This is a prototype case for OneBlade 360 Face PRO electric shaver and Hismile Electric Toothbrush, and is therefore a work in progress and not complete yet. I struggled to find dimensions online for these products,…
Saw one the DJI ‘s but nothing for the Holy Stone’s so I whipped this one up to fill the void. Snaps on and makes getting the drone out of the case a breeze.
I don't like to use glue as the original design intended so I've added holes to secure by screw. I also made its blade holder longer as that's what I have, and a different version that have a bend for wire to exit perpendicular to fuse,…
Der kleine Organizer ist gedacht um am Schreibtisch Kleinteile zu organisieren. Ich verwende sie um elektronische Kleinbauteile zu ordnen, ohne viel Raum zu verschwenden. Auch Schrauben M1, M2 etc. lassen sich in sinnvollen Mengen…
A collection of ratchet locks ranging from 50mm - 90mm to replace any broken ones. There is a notch on one side of the ratchet lock that is flipped on some ratchets. I'm not sure if this is a left spin/right spin difference, but my cobolt…
The old plastic broke away and the drawer always fell out. So here ist the new end Cap for the Drawer rail. The wheel has a Diameter of 20mm.
3D-printable replacement blades for the extruder cooling fan. The cooling fan placed in front of the extruder's heat sink has the important job to keep things cool above the hot end. By accident and a bit of bad luck the fan blades can…
lock designed to prevent patio umbrella from spinning around when tilted to block the sun. designed for a 37mm umbrella pole. May work for sizes ranging from 36-38, but not tested. If you found this useful, please donate what you think it…
3D printable guard and transportation solution for the sharp edges the EmitrR metal detecting shovel / spade Contains in principal 3 parts, but the main part can be used standalone. If both main parts are used, they need to be glued…
It's just a Gridfinity holder for a cheap (but great) plastic razor scraper. Angled scrapper recess to hide blade and expose handle, storage for as many blades as possible, and a lip to allow stacking when not in use.
blade arms or blade elbows for dummy 13 , for blade elboy you need to cut the defaul elbow in the arm and attach the blade to the arm , then push it until it clicks in place. there is an image so you can see better
Revisions Revisions Description v1 - v3 Visual and functional improvements v4 Improved chamfers and printability improvements, added bevel to lower edge to allow low angle print bed scraping to prevent blade biting into bed coating. v6…
this part plugs in the height adjustment handheel to prevent it from rotating and thus prevent unwanted sawblade decrease
Ein kleiner Tisch mit integrierten Werkzeug Ständer einer ablagefläche und Schubladen. ich empfehle den Tisch falschherum mit stützstrucktur zu drucken. die box richtig rum mit Stützstruktur. viel spaß damit. ich bin offen für…
Designed some blade cover for my Fila Bond Ice I'm using double tension spring with screw, because the covers are loose by design, but lace or rope should work Multiple size available
Originals tolerances were too tight when printed with my current .6mm nozzle setup, so I widened the blade area by 2mm (1mm each side). This model is a bit loose (but usable) for RapidEdge serrated utlility blades, but now fits the stock…
What a POC for a 10" rack POC for a modular compute blade 1U system very shallow depth (~100mm) Why Modularity, I like the idea you could swap out some of these with a custom module. 10" rack width and limitations of my Prusa Mini's bed…
Requires soldering a USB-C PD (I used this one at 5V) directly to the battery terminals. The base part will provide additional support. No glue is required. Disassembly starts with crude destruction of the proprietary charging port. Then,…
Inspired by this Paper Cut https://www.thingiverse.com/thing:6897129 I made a single blade version of it. V2 update: Improved the geometry. Added the cover on the smaller part. Now the blade works much better.
Changing blades on a bandsaw or large sawmill requires properly setting the tension of the new blade. If you run a sawmill these gauges ( tensiometer being the $20 word for it) are part of the required tools of the trade. Unfortunately…
It's made to be a keychain. Put it on your bag or something, just to show you're a hunter, for those who know. Dimensions: 29.40mm (width) x 58.60mm (length) Height varies for each model. Loop is 15.64mm wide and ~4.25mm tall.
This is a Gravity, or motion, deployed Hidden Blade. Inspired, obviously, by Assassin's Creed. Printed at 0.15 mm Layer hight, 15% infill, 3 walls, and in PLA. You will need support for the locking tab at the front of the main housing. I…
Der Halter bietet Platz für 21 Darts. In der Schublade kann man Ersatzteile wie Spitzen, Schäfte und Flights unterbringen. So hat man alles an einem Ort und ist sofort griffbereit. Die Schublade hat einen flachen Boden, sodass man sie…
spinning top with rack and pinion spinner like a beyblade kinda the more infill you use the longer it will spin snaps together with zero tolerance press fit mates. prints in 40 minutes at .20 speed pla settings
7.25 multiple saw blade holder. Safely store your saw blades and have extras on hand when needed. I like to carry old blades with me for cutting MDF OR VINYL.
Quick and dirty replacement for the Wahl Pro-Series Forever Blade trimmer. This works only for this model I believe, as they've moved where the button is in relation to the center of the triangle shape on newer models. Print in flexible…
For building this drawers, you need a router, a drill and a saw. The router bits are 12mm and 18mm, also a pocket hole jig to fasten the front panels are helpfull. There are PDFs with the technical drawings, please refer to them, to see…
My scroll saw blades came in a zip bag so I wanted something a bit more durable and made this simple design. It fit's 130mm blades but you can adjust the “Z” size in your slicer if you need larger blades to fit. The lid is push fit that's…
Audi Emergency Key HAA Type A, generic Blade. This key is the perfect replica of the original audi blade, measured from the original. Fit with your Audi A1, A3, TT, Q3, Q5, Q7, A4, A5, A6, A8 with HAA Blade Key type Important! If you send…
One place each for OneBlade and Multigroom series shaver Added a couple of places for most used accessories like nose and body trimmer Long tray for all other accessories Toothbrush and toothpaste tray Trays are a little bigger than…
A table ready board game insert to allow for fast and easy setup of the game. Designed for the regular base game and Anglers Cove expansion Player’s have pots for their individual components required to start a new game. Walls have been…
This Hacksaw Blade Handle is one of several versions of my popular Hacksaw Blade Handle. It securely holds a standard 10" hacksaw blade and transforms it into a compact, durable cutting tool ! It provides a rigid and ergonomic extension…
Remake of Rugged Box (Parametric) by Whity Material PETG, ASA, ABS, etc (Latch is recommended in PETG) Additional Parts 2 - M3x30mm screws (Latch) 1 - M3x50mm screw (Rear Hinge, two smaller screws could probably be used and inserted from…
A really cool way to decorate you backpack, suitcase, pencil case, anything really! Great as a gift for any Stormlight Archive/ Brandon Sanderson enthusiasts.
Model made to hold razor blades so its easy and safe to use as a knife. Good for cutting shapes in food or a small utility knife. Since its such a small model I reccomend using low layer height. Printed with fuzzy skin for grip and…
Inspired by AvE's design. This is a completely remodeled version and is not a derivative or a modified version of the original. There are two versions depending on how you want the blade to stick out of the top. You will need one M3 heat…
Simple Sleeves to hold 3-5x spare blades for a Milwaukee 2529-20 Subcompact Bandsaw. STEP files included if you would like to tweak for your own usage! Included are labeled sleeves for 8 to 11 TPI, 12 to 16TPI, and 18TPI blades. I printed…
A small knife, or scalpel, consisting of a single segment of a standard 18mm snap-off blade. Very convenient for small tasks. Note: If the blade doesn’t fit, heat it before inserting. New blades will fit without the need for heating.
when you print this go into your slicer and scale the cap down to 99% so that it can fit in the holder. also go into your slicer and right click then select “split” then “split to objects” after that select the middle of the blade holder…
Simple drying stand for the PHILIPS OneBlade and a razor blade. There are two versions, the first one is a bit small. The second version is thicker and more rigid. Best printed sideways and with a brim.
I needed a way to connect the saw blade cover on my sawstop to the dustcollector in my shop. This one provides a smooth transition from the end of the blade cover / OverPort to the 2.5 inch dust collector fitting on my overhead rig. The…
A simple, fast and easy to print holder for your Philips One Blade. The less material you use the more sustainable it will be. My design principle for use in wet rooms is, to create parts that allow water to drain away unhindered to avoid…
I lost my original mixer/blade for my 500ml Tupperware Quick Shake. Print 3+ perimeters, 100% infill. I recommend printing in PETG ; “food grade” PETG filament is even better.
I printed mine with auto supports and a brim, with the model tilted forwards 45 degrees. I also added a version with designed-in supports in the correct orientation. The clipper guard storage will still need supports, and best to print…
this is a simple pusher and holder, the actual pushing is done by a simple pen springe, it does have a little trouble when your down to 1 or 2 razors but at that point it holds them to the front so its not an issue.
Simple Travel case and Stand for Phillips One Blade, with italian socket space
Find 3D-Printed RC cars here.
Find 3D-Printed RC cars here.
Untertisch-Schublade aus dem 3D-Drucker Dieses Projekt ist eine praktische, kompakte Schublade, die zur Aufbewahrung von Kleinteilen, Werkzeug oder Schreibutensilien unter einer Tischplatte montiert werden kann. Die Konstruktion ist ideal…
PHILIPS One Blade Razor - Minimalistic Travel Case Reason for Model - The reason for the model was for a simple OneBlade case that only carries what I need a OneBlade with a guard for traveling. Features Cap Holder - For keeping your…
I'm not a fan of travel cases, no matter how small I think they're too bulky. Just slip this minimal dual purpose stand over your OneBlade and go. An opening on the bottom lets the stand slide onto the shaver’s head, gripping it securely…
Purpose I often find myself going on short trips where I try to pack only what is necessary, and my trusty OneBlade QP6510 is always by my side. Consequently, I had to figure out a design to protect it from the harsh conditions of these…
2 x 3 gridfinity bin to hold XL bed scraper with blade attached and extra blades. no support needed
90mm EDF 12blade Propeller. I recommend printing it from stronger filaments like : PETG , Nilon , Carbon reinforced nilon ... Category: Other
Great for if you have a Xenoblade display like amiibos or just want to hang the cool logo somewhere
this is a 4 blade toroidal fan meant for 775 d shaft motors and high rpm I printed mine using pla at 25% infil it's helpful to use the flat as the contact with the table. It may be beneficial to print a flat hub to help keep this flat…
Eve Automata Bust from the video game Stellar Blade. This bust measures 25cm. This design has these STLs: -Bust -Base Thanks for stopping by :) Link to Patreon :) patreon.com/Artoys3dPrint Busto de Eve Automata de video juego Stellar…
I made this little tool to remove silicone seals in a bathroom, turned out to be quite helpful. The utility blade needs to have some holes (see photo). It holds quite reliably. When inserting or removing it needs to be held by the…
Lighter blades for cheapo battery operated brush cutters. Don't know how they'd survive if used in a gas-powered tool. If you're gonna try, I'd recommend not to use the screw-on blades version. Use stiff TPU for everything and M4 hardware…
Diese Beifahrer Fußerhöhung hilft kleineren Menschen auf dem ATV TGB Blade 1000 seine Füße aufzusetzen. Habe die für meine Frau entwickelt, um eine entspannte Fahrt für sie zu gewährleisten. Die Teile kosten euch nichts (die Dateien). Ich…
⚠This is not my design, and I haven't tried making it yet myself.⚠ I just made a clearer overview of the model here in Printables. original creator's Thingiverse: https://www.thingiverse.com/liyue_cheng/designs assembly video:…
New smaller cutting disc fot the mammotion Luba Advantages: Enlarged cutting surface thanks to longer blades Lighter than the original (<100g), therefore smoother running and less motor load Very quiet in operation Improved cutting…
Just a fix for the closing clip/latch. It inserts into the first part of the spring. I had to file down mine, it didn't fit for the first time. I used i bit of hotglue, because i filed it down a bit too much, but i think press fit is just…
Replaces the original 3 blade plate. For cleaner cuts and less noise. Pause print after ~7mm and insert standard M5 nuts
Ventline replacement fan model BVD0217-00. Printed with ABS and used to replace my RV's fan.
My boss has a saber on her shelf, but since it has the blade attached she cant use 90% of the saber stand on this site. so, I took another design and shortened it in tinker cad (I just cut and stitched the models back together).
Print without supports standing. 0.4mm nozzle, 0.2mm layer height; 3 perimeters, 10-15% infill. Printed with PLA without issues. The lid fits a little on the tight end, it helps wiggling it on by tilting towards the blades. Snug and…
A small disposable blade bank for storing discarded de razor blades. I recommend printing in a strong material like PETG (pictured). I am not responsible for any injuries. Please practice safe sharps handling and disposal.
stand for the razor and accessories feel free to remix it for other one blade versions
Make sure to print with the the stair-stepped portion facing down
A 190mm blade shaped bicycle spoke wheel reflector that clips onto a ~1.8mm bicycle spoke. Designed to maximise the relective surface area while still being aerodynamic and looking as good as possible. Requirements 9 or 10mm reflective…
A compact honeycomb storage box designed for 45mm tri-blade propellers , ideal for tinywhoops like the HappyModel Mobula 7 . Stores 3 stacks of props. The small version stores 9 props while the large stores 27 props. . Honeycomb design…
Unleash your creativity with the Blade Valkyrie Painting Miniature . This dynamic warrior figure, armed with a sword and shield, captures the fierce spirit of a Valkyrie in battle. Designed for hobbyists, painters, and collectors, it…
Recently I was approached by a fellow Rokenboker about modeling a set of somewhat rare parts that never had their official models released by kid*spark. These parts are no longer available for purchase. These models are have not been…
Longer blade holder for #4 hobby blade so I don't have to cut them down to 28mm every time. I also positioned the set screw to go through the blade so it doesn't pull out.
This is a simple case to store your used razor blades if you're trying some of them side to side. Please print it out of PETG, remember to use 0.1mm layer height (which is the height of an average razor balde).
Introduction Get your own huge Beyblade X Stadium! It's still smaller than the one in the anime, but it's probably the largest you can get on the market! With a total dimension of 95 x 92 x 15 cm (38 x 36 x 6 inch) this stadium is HUGE !…
This upgraded PET bottle cutter is engineered as a practical and efficient alternative to the original design. Instead of relying on a small custom-made blade, this version is optimized to work seamlessly with a standard 18 mm utility…
This is a digital STL file - print-ready and high quality. > "A trick weapon typically used by Healing Church hunters. > It is said that the silver sword was employed by Ludwig, the first hunter of the Church. > When transformed, it…
Wall mount for Philips series 5000 MG5931, OneBlade QP2520/30, Babyliss E111E, E112E, E116E.
Its a Katana for Plaing.its smal so feel free to make it Biger.i am a jung creator and i make mi models with Tinkerkad
These are two models for clockwise and counterclockwise propellers to be used with a 2 blade hub of an 4.8" propeller.
Hobby or xacto knife holder for ~9mm pencil size. Including spare blade holder. Made for IKEA Skådis pegboards. Angle of the knife holder is 30º. Size of the spare blade container ~9.5x14mm Organic/Tree support (auto) on 30º threshold is…
This stand is designed to cover the razor head so when placed in a drawer items won't fall on the blade or people accidently contact the blade with their hand while getting items from the drawer. The stand also will hold a package of…
This is my third atemt on a modular Beyblade arena. My other bayblade desins are on cults3d: https://cults3d.com/en/design-collections/sanfumini/beyblade-collection because some of them are paid models.
Gillette Fusion Razor Travel Case with Blade Cartridge Storage This compact and practical case is designed to protect your Gillette Fusion razor during travel or everyday use. It closes securely to prevent accidental opening while…
This model is a holder designed for standard scraper blades used with electric stove and glass cooktop scrapers. It provides a safe and organized way to store spare blades, protecting both the blades and your hands from accidental cuts.…
Protective case for your Smith Blade Pro. - Protection from dirt and or splashes. - Scratch protection. - Customization.
Was kind of annoying popping the clips out of the stadium every time I wanna pack it up. With this, just insert and twist to lock the stadium cover. Also has a hole so you can put on a carabiner for spares. Tested on Takara Tomy BX-10 and…
A 3D printable blade that fits the Bamboo labs scraper. Metal can sometimes damage the print plates and thus, I created a simple but effective 3D printable blade to use with the Bamboo Scraper grip. I created 2 blades depending on if you…
![Utility Blade Storage Module Gridfinity [v2] 2mm Wider](https://media.printables.com/media/prints/1121250/images/8465419_d308793f-dda7-4cf0-b73c-26b4375bfc2f_ebbd5910-c6e0-4416-851d-cc8fa1a8ba0c/utility-blade-storage-module-gridfinity-v2-2mm-wider-remix.png)
![[Repost] Assassin's Creed: Unity "Phantom Blade"](https://media.printables.com/media/prints/2e2d9fe4-4893-4c4b-bd29-add971ea9b24/images/10225232_36bee81a-302c-4310-8561-09fb05e5ecaf_383f2f63-de54-46aa-88ce-ec5ffc93dcd4/fade169bb9865a1e9dcf29bd14abd057.jpg)
