Shin Hati Lightsaber for 25mm blade
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€12.21 – €14.92 net (excluding VAT)
For file: ls_sh_25_shield_0.25mm_PETG_MINI_12h51m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €13.56 excluding VAT (range midpoint).
- Weight reported by the author
- 198 g
- Print time reported by the author
- 12.84 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simplified model of Shin Hati's lightsaber from the Ahsoka tv-series made for a 25mm blade (1").
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 61
- Makes
- 0
- Views
- 440
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My simplified version of Shin Hati's lightsaber scaled for a 25 mm (1") blade. The model has an internal compartment for my electronics carrier (https://www.printables.com/model/797013-lightsaber-electronics-carrier) and uses the Adafruit prop maker feather, two neopixel strips (in my version, 100 leds each of 144 leds/m WS2812B), a small speaker and a momentary push button (12 mm diam.). All is driven by a 18650 li-on battery. My blade is made from a 25 mm acrylic tube with a wall thickness of 2 mm, sanded on the outside and filled with ‘diffusing’ material with the led strips back to back in the middle. Getting a good diffusion was the hardest part, in my case a plastic film with frosted look rolled to a tube (2-3 layers) and some bubble wrap to fill the gap…
The model is split in more parts than needed for ease if painting & weathering is desired.
Some parts will need supports for a good print quality. The parts need to be glued together if you want to be able to swing with it as a complete saber is quite heavy.
!! THIS IS NOT A COMBAT BLADE !!
Model file in Autodesk Fusion for those who need other dimensions…
UPDATE:
Added a ‘blade plug’ model for use without blade attached.
Added a alternate endcap with openings for a better sound.