Shin Hati Lightsaber for 25mm blade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simplified model of Shin Hati's lightsaber from the Ahsoka tv-series made for a 25mm blade (1").
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 440
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My simplified version of Shin Hati's lightsaber scaled for a 25 mm (1") blade. The model has an internal compartment for my electronics carrier (https://www.printables.com/model/797013-lightsaber-electronics-carrier) and uses the Adafruit prop maker feather, two neopixel strips (in my version, 100 leds each of 144 leds/m WS2812B), a small speaker and a momentary push button (12 mm diam.). All is driven by a 18650 li-on battery. My blade is made from a 25 mm acrylic tube with a wall thickness of 2 mm, sanded on the outside and filled with ‘diffusing’ material with the led strips back to back in the middle. Getting a good diffusion was the hardest part, in my case a plastic film with frosted look rolled to a tube (2-3 layers) and some bubble wrap to fill the gap…
The model is split in more parts than needed for ease if painting & weathering is desired.
Some parts will need supports for a good print quality. The parts need to be glued together if you want to be able to swing with it as a complete saber is quite heavy.
!! THIS IS NOT A COMBAT BLADE !!
Model file in Autodesk Fusion for those who need other dimensions…
UPDATE:
Added a ‘blade plug’ model for use without blade attached.
Added a alternate endcap with openings for a better sound.