Aero Bladed Bicycle Spoke Holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.76 – €0.93 net (excluding VAT)
For file: AeroSpoke_PETG.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.85 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 1 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This device holds bladed aero bicycle wheel spokes so they don't rotate when you true the wheel
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 75
- Makes
- 0
- Views
- 598
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Public Domain
I have a set of DT swiss wheels which, in addition to having bladed aero spokes, also uses radial pull spokes so the spokes will freely rotate. DT swiss makes a device which works really well, but I prefer to make my own. The handle is 90 degrees to the spoke, so your hand is naturally in the correct position. The blade section is tapered as are the spokes, and the center indent is where you use your thumb to press the spoke into the groove. I recommend printing in PETG and also orienting it upright with supports to maximize strength