224 models
Inspired buy the gorgeous wood version available at Wheel Fanatyk: https://wheelfanatyk.com/collections/lacing/products/wheel-fanatyk-nipple-shuffler (if you build wheels, you will definitely want to read Ric's awesome blog, which you can…
A wire-spoked wheel modeled in Fusion 360. It is a scale model of the Borrani wheel for Alfa Romeo 2600, in a 1:18 scale (although it is not 100% accurate). Featured in the Prusa Academy Fusion 360 online course. Intended primarily for an…
The paper is finally published and fully open-access! https://bsapubs.onlinelibrary.wiley.com/doi/10.1002/aps3.11562 We have only scratched the surface in developing 3D printable tools for COBLE. We began with microscope adapters and a…
Personalize your bicycle with your name or message! Print the letters you need and snap them onto your bike spokes. Press hard to snap the letters on the spokes. The letters will stay in place and not move during cycling so the text…
🚴💨 Spin Your Ride – Bicycle Spoke / Valve Propeller Fun! 🌀 Why just ride when you can fly ? This 3D-printed propeller spoke/valve cover turns your bicycle into a mini aircraft (well… in spirit at least😉). As you ride, the propeller spins…
My take on the Dyson V12 tool adapter. I propose three models (the list might expand in the future): the base adapter with no tool a crevice tool with a narrower air intake a nozzle compatible with standard Compacter vacuum storage bags…
Hi, I hope you will enjoy this 3D print. I will be glad if you like my model. I printed this model on Prusa Mini using PrusaSlicer 2.6.0-alpha5. I suggest turning on ironing in the slicer, 15% infill, automatic painting supports and…
This is remix of original OpenRC 1:10 4WD Truggy Concept RC Car Rims. I used HobbyKing tires: https://hobbyking.com/en\_us/hobbykingr-1-10-monster-truck-10-spoke-black-wheel-block-pattern-tire-12mm-hex-2pc.html And adjust create new rims…
Designed to fit a standard 26mm tyre. +3mm offset, 12mm hex. Will take up to a 4mm shaft. Spokes are printed separately and glued to the rim. Includes versions for FDM and resin printing. For personal use only. No commercial sales.
This is an alternative wheel design for the Landy Mini from 3D Sets ! I took the original model of the rim, and swapped the center section for a 5 spoke design. The reception of the axle and the tire are unchanged. If you like check out…
This was created from the original Prusa file. Image 1: Carmine Red on Galaxy Black Image 2: Galaxy Black on Prusa Orange Image 3: Ultramarine Blue on Prusa Orange Image 4: Prusa Orange on Jet Black EDIT: I added 2 additional models plus…
For Samsung Jet 75/85/90 accessories.
This model is compatible with the lego system.
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
This spoke nipple sorter tray is a quick way to align, pick up, and store spoke nipples for wheel building. The tray has tapered slots to quickly align nipples dumped in from a bulk container.
I really liked Brett Casteels idea of press fit Bicycle spoke decorations so I decided to design my own. What started with a simple heart quickly became a template to create pixel art objects within Fusion 360. My partner used that…
This model is compatible with the lego system.
1:24 Remix of my Miniwheel
For tightening bicycle spoke nipples. Print with the stronges material you have available to you for best performance. Tested with Prusament PC Blend Carbon Fiber (PCCF) and it held up great Recomended to use at least 6 walls and ≥30%…
These are 91mm Spoked rim and wheel tires design for RC Planes. The video provided shows how these exact rims were made using Tinkercad. Follow along and learn to make your own custom parts for RC planes. Black TPU:…
Here are some RC drift wheels. They have 12mm hexes and should fit just about every 1/10 scale on road or drift RC car. The wheel and tire are two separate models and print separately. Included is also an on road tire with treads for…
Blade Spoke Holder - Tool to avoid twist of spokes during tightening
Print with a hard material so the tool does not flex as much
Saab cross spoke cap for 900 and 9000 series I didn't print it yet.
An universal Ring Spoke Wrench Usable for spoke nipple sizes: 9/10/11/12/13/14/15/15. Which are equal to a slot of the following width: 15 = 3.2 mm 15. = 3.3 mm (15 is present twice with different dimension each, i added the dot myself)…
A bicycle spoke tension meter based on the original Jobst Brandt design, my personal favorite. Once calibrated, the tension meter is less affected by spoke geometry than others because the deflection is measured from the same side as the…
This model is compatible with the lego system.
My original easy to spin bike wrench. Not earth shattering, but here it is.
Included are 3 designs Heart, Star, and Lightning Bolt I have the models setup to print in groups to improve bed adhesion. The heart and star have built in supports and a ring that you can add an outer brim and print them all as one unit.…
Making larger wheels for larger scale trains. This was produced for some larger South Australian trains like the SAR 620 and 520 class but would look at home on a lot other trains. Don't scale your trains to the wheels, change your wheels…
Please download SKull_Bead.stl by Tony_D to play around with the scad file. Category: Sport & Outdoors
Yes Category: Sport & Outdoors
Bring back that 1980's nostalgia with 3D printed spoke beads! Pedal slow for awesome sounds. Designed for 2.0 mm spokes. Recommended Print Settings I would start with the Normal Tightness (1.7 tightness factor) files. Count the number of…
Pretty standard dimensions for 2.2 inch RC wheels. The 2wd fronts use 8mm x 3mm ball bearings. The rears and the 4wd fronts use the standard 12mm hex. I suggest PETG for strength, but it might work fine with PLA, I just haven't tried…
These spoke clickers add sound and style to your ride, designed to fit children’s and standard bicycle spokes (1.8–2.3 mm). Available in two diameters (2.2 mm and 2.5 mm) and four designs — heart, 6-sided die, star, and ring — they snap…
Like a playing card in your spokes—if that card went to engineering school. Tired of your bike being quiet, responsible, and… boring? Relive the glory days of shoving a playing card in your spokes and pretending you had a Harley! Maybe…
The beads simply snap onto the wheel spokes and make a clanking noise at lows speeds while also adding some color. Due to the small surface area, these are best printed with a brim to provide better bed adhesion. Just remember to remove…
This model is compatible with the lego system.
This is a WIP I did during 2020 (as a birthday present for my dad, his bike), and never got around to improving so posting as-is. It has “stretched spoke” wheels - which are printed flat (in 2 halves) and then flexed to their width, with…
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
A small, lightweight spoke mount for a bicycle computer magnet. You need two short M3 bolts and preferably an M3 tap (you could also use the M3 bolts to create the threads, but this is not the preferred method). No support material…
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
Letters for your bike wheels. These fit a little loose out the box, so if you want them to stay exactly as you've positioned them, consider using a bit of tape or rubber If any letters don't print right, let me know, I can remake them…
This is a much easier to use and better bladed aero spoke holder designed specifically for 0.9mm spokes but works well with 1.1mm. Design was entirely made with shapes in Prusa Slicer… really quite simple! different width spokes are…
One piece wheel and tire for drifting. 1/18 scale to fit on Traxxas' LaTrax or similar models (like Tamiya M series ) . It prints fine with a 0.2mm layer height. Achieve best results by printing the wheel face up with black material. No…
Spokey doke in the shape of a grenade. Sink the model into the build plate if you think you might have trouble with adhesion. If you want to play with the SCAD file, you will need to download the original stl from which this is remixed .…
This spoke tension meter is based on a design from DT swiss. Note: as long as this tool is not calibrated, only comparison measurements can be done, no absolute spoke tension is measured. Features: Set screw allows to adapt the spring…
My niece is all into pink and unicorns, and she just got a new bike for Christmas, so what better than gifting these Unicorn Spoke Beads for her birthday. The model files have painted-on supports for the chin of the unicorn.…
I work at a bike shop and we've got the Park TS-4 wheel truing stand which is really nice, but it doesn't have the TSB-2 base which has provision for holding the spoke wrenches. (The base in the first photo is on my TS-2 which I bought in…
A spoke ruler is an essential tool for a bike mechanic or wheel builder. Having the right length spokes is important to a fresh build, or replacing broken spokes. This is loosely based on my DT Swiss spoke ruler and just fits on a Prusa…
I took these nice wheels and stripped off everything but the spokes so I had an insert for blank wheels. It's sized for 12mm, but you can increase/decrease it easily enough. Category: Hobby
Tool to fit the splined spoke nipple on a Mavic Crossmax ST 29 mountain bike wheel. Might fit other Mavic wheels too, and can probably be customized using OpenSCAD (source file included) to fit different size spoke nipples (maybe on some…
When printed in flexible filament, the slit allows you to put this between the drive-train and wheel without disassembly. Much more robust and better looking than the original clear yellowing one. I printed mine out of 98A hardness TPU to…
I designed these for a customer for his model trucks. no supports needed, print at .2 layer height, 15% infill
Had to replace a spoke handle that failed in my lathe. Have ordered an original replacement but meanwhile replaced the failed one with this model. The Wheel mid center hole thread is M12x1.75 and the Handle thread is M8x1.25 STL was good…
I wanted to make some "White Spoke" WPL wheels to make my C24 look more like the 1982 Toyota I had as a teenager. While at it, I decided to create a system for making the wheels that doesn't require supports when printing. There are five…
WHAT IS THIS A scalable 6-spoke racing wheel inspired by classic forged designs. Print at RC scale (1/10, 1/8) for your project car, scale up for display, or somewhere in between. Split into spoke-face + rim for clean printability. USE…
This model is compatible with the lego system.
I designed these for a customer for his model trucks. no supports needed, print at .2 layer height, 15% infill
I designed these wheels for the jjrobots B-Robot EVO 2 because I wanted something more rugged and based on a set of WORK XD-9 I used to have IRL. They should work on any NEMA17 motors with D-shaped shaft. Attach wheel lock to wheels then…
first try to do my own models i did some remix on the Bicycle spoke decoration beads from Milan and added some models i thought would be missing. maybe you need to print some test to see if it fits on your spokes and skale it up to 105%
Change the most universal spoke wrench design into your new favorite with only about 4g of filament! No more difficulties selecting the correct size every time you pick it up! Don't compromise between usability and adaptability! FEATURES:…
This model is compatible with the lego system.
One of my child's friends was really into Legos, so printed some of these in red and blue. I just used PLA at 50% infill.
I have a set of DT swiss wheels which, in addition to having bladed aero spokes, also uses radial pull spokes so the spokes will freely rotate. DT swiss makes a device which works really well, but I prefer to make my own. The handle is 90…
This model is compatible with the lego system.
The main source page for this model is on GitHub. The GitHub page may have more recent updates and more detailed instructions. Go to my site for an overview of my other models . Not all of them are published on Printables. What is it?…
A hub that can be printed for making children's teepees. Can be used with wooden dowels that are 3/4" or 19mm in diameter, and are about six feet or two meters or so long. Design your own skin/tent material, and let the little ones play.…
Part of a full model of a Trek Remedy , see further details and files there. Can be used for other projects, feel free to msg me for a STEP file. Uses pins for alignment, but they may be too tight to “slot” into place fully. I used glue…
This cone spoke will fit yarn mast poles 8.6mm (0.34in) dia or smaller and has been test fitted on an NZAK (shown in blue) and Jeeping Johnny V2 (not shown). The mast hole in the cone spoke does have some extra tolerance which may cause…
Print in place wire spoke fidget spinner. After printing (if needed) place the fidget bottom down (same side as it printed) then push the center downwards to release the spinner. Tip: add a small drop of sewing machine oil to get an…
Remix of an excellent print. This gives printers an MMU compatible, dual colour option of the kumihimo 8 slot disk for bracelet making
Its a RC 1/5 - 5 Spoke Rims, modeled after the Original BBS wheels that came with my Bergonzoni RC 1/5 Vintage . WIP- The model hasnt been tested;
You should print this if you want to check your spoke tension Update 2023/05/20 Added more Markers (1-20) Use the Park Tool Wheel Tension App: https://www.parktool.com/wta
1/10th Scale R/C Car Rim - Generic 5 Spoke 52mm Diameter 26mm Width 12mm Hex 4mm Shaft Category: R/C Vehicles
This model is compatible with the lego system.
Spoked wheel / Speichenrad for wooden railways - for shaft diameter of 2mm (free running) Category: Toys & Games
Hi, discovered, that there are no replacement micro filter available yet for the (my) new Samsung Bespoke Jet AI . i didn't noticed that, since i ordered the wrong filter set. So i created parts, to build a spare filter. You need a spare…
A friend bought @Sam3DBox's 3-Spoke Steering Wheel and needed to connect it to the Moza Racing Quick Release, so I made this adapter for it. Added a tiny detent bump to make a bit more friction, so the steering wheel has a good hold but…
Bicycle wheel spoke protector, no need to disassemble the wheel
I needed a spoke shave for my woodshop, but I like to build things. I already have some 1095 steel, so i decided to just make a blade out of that and print the body. so, here is my first attempt! I plan to print this this weekend, and…
Add a spooky flair to your ride this Halloween with this adorable ghost spoke decoration! This 3D printable design easily attaches to any standard bike spoke, giving your wheels a haunting glow as you cycle around. Perfect for Halloween,…
I had various spokes in the spare parts drawer and now, with this modified Thing, everything is finally in order. I have included various boxes and fasteners for people who prefer screws to sitting at CAD - the 30mm diameter chosen is…
A one unit holder for Park Tool spoke wrenches. Fits 3 wrenches.
A set of classic 5 spoke American Racing mag inserts. There are two files. One with just the spokes, and one with the ring for the insert. Category: Hobby
Not as good as injection-molded stock ones perhaps, but can accommodate different sprocket sizes. The model can rub against chain during coasting on the lowest sprocket since it's not conical, but that is not a problem in most bicycle use…
These wheels were created as replacements for diecast cars. Hotwheels and matchbox for example. They were printed using an Anycubic Photon. These can be a challenge to print. Note that these wheels may not work on all cars. Category: Toys…
Print with supports at 45 degrees relative to the bed for best results. Made with Openscad.
Tool for Sapim Polyax Nipples with slot to guide the spoke nipple through the rim to the spoke and screw on the first few turns. Replaces the cut-off cotton bud for me. I would have liked to make it round, but it prints much better and…
With a spoke wrench that work with different size it's annoying to select the right "hole". This part indicate which part of the wrench to use and the direction where to turn to tight the spoke. Openscad file included.
for some spokes you have to adjust the model. width: 5mm height: 60mm Update: added step file
This is a model based on the vintage Japanese Cat Eye RR-250-WU wheel reflectors. They aren't easy to find anymore, so I decided to make my own. The model is fully parametric, so you should be able to scale it to your desired dimensions.…
I found the original crevice tool to be too long, so I decided to design a shorter version. I successfully designed a locking tab that prevents the attachment from slipping off.
Wabeco 3-Spoke Hub: I created a 3-Spoke Hub for my Wabeco drill stand with the aim to use the original 25 mm mount of the standard feed lever. The part where the spokes are sitting is 50mm in diameter and the spokes themselves are 13,2mm.…
Durch diesen Halter, wird das Saugrohr an der Station gehalten, damit kann der Sauger leicht einzeln abgehoben werden um z.B. nur die Pet Tool Düse zu nutzen. Druck hat soweit keine Anforderungen, ich würde PETG empfehlen auch Support ist…
Clip on Bo Katan & Mando bike spoke beads (13.5mm tall) to suit 2mm bike spokes. Recommend printing at a layer height of 0.08mm to capture the helmet detail. Check out my other models here 👀 See some other Bo-Katan models here 👀 See my…
Einfaches Speichenlineal mit Gleiter zum anreissen bzw anzeichnen von Speichen vor dem ablängen. Die Länge ist mit 270mm so gewählt das das Lineal auf den meisten Druckern diagonal am Brett druckbar ist. Der Drucker sollte gut kalibriert…
🦇 Bat Spoke Ornament – Add a Spooky Vibe to Your Bike! Transform your wheels into a Halloween-ready ride! This sleek bat ornament clips securely onto standard bike spokes (1.8–2mm), perfect for night rides or adding a touch of gothic…
A complete ground-up remodel of the legendary RS Watanabe 8-spoke wheels, specifically adapted for 1/10 scale RC drift and touring chassis. Instead of simply scaling down a 3D scan or mesh (which leads to paper-thin structures and…
Since a child I have been fascinated by tessellation and have always admired the works of M.C.Escher ( https://en.wikipedia.org/wiki/M.C.Escher ) and with the kind permission of the Escher family have laser cut many of his designs for…
