Beyblade X Stadium
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fully printed Beyblade X stadium resembling the takara tommy stadium
- Rating
- 4 / 5
- Likes
- 117
- Downloads
- 2,348
- Makes
- 6
- Views
- 14,029
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
It takes like a week of printing, and like 2kg of filament, if you can get a takara stadium, just do that, but well, thirld world problems.
it uses 26 M3x20 and 14 M3x10 screws with their respective nuts
print the rails at 6 perimeters and 100% infill, i used petg, and use a .4mm nozzle as you need the teeth to be pointy
The arena is printed in .2mm layers as you dont want it to be too rough, and full perimeters
now, the ring and the shell print with at least 6 perimeters but you can go as rough as you want, the shell is soldered, and i cut the bottom 100mm to just use 3mm tick wood strips as they are flat profiles and would be a waste to print
downsides, with the shell you cant see much as it isnt transparent, maybe i should just make a square one out of polycarbonate