Counting matching models…
A collection of ratchet locks ranging from 50mm - 90mm to replace any broken ones. There is a notch on one side of the ratchet lock that is flipped on some ratchets. I'm not sure if this is a left spin/right spin difference, but my cobolt…
spinning top with rack and pinion spinner like a beyblade kinda the more infill you use the longer it will spin snaps together with zero tolerance press fit mates. prints in 40 minutes at .20 speed pla settings
Introduction Get your own huge Beyblade X Stadium! It's still smaller than the one in the anime, but it's probably the largest you can get on the market! With a total dimension of 95 x 92 x 15 cm (38 x 36 x 6 inch) this stadium is HUGE !…
This is my third atemt on a modular Beyblade arena. My other bayblade desins are on cults3d: https://cults3d.com/en/design-collections/sanfumini/beyblade-collection because some of them are paid models.
Was kind of annoying popping the clips out of the stadium every time I wanna pack it up. With this, just insert and twist to lock the stadium cover. Also has a hole so you can put on a carabiner for spares. Tested on Takara Tomy BX-10 and…
Simple remix of Orberlorb's Beyblade X sidegrip to make it also fit for Winder launchers. Slides into grip-slot.
I made these Beyblade bits for all of the Beyblade x lovers just please don't take the file and say it's yours i put some work if there is any centering problems you have full control to fix it
Habe dieses Modell für eine Bekannte ihre Sohn gemacht, Hoffe das es Funktioniert. Habe es einfach mit Pla+ gedruckt . Wenn Ich etwas verbessern kann dann schreibt mir bitte. Der Halter ist nicht von mir, denn findet ihr auch auf…
Best with a multi material system to implement a different material for support interface. I printed with 4 walls and 100 % infill in the orientation of top and bottom with auto (normal) supports. All of them work as intended, however,…
A slimmed down version of Beyblade X Side Grip made by Orberlorb
What if I take one of the best Balance bits of Beyblade X and stance it down. That's Under kick! This follows the same Height as an Under Needle Print Settings [PLA]: Layer Height - 0.12 Walls - 2 Infill - 50% Gyroid, Multiplier-2 Tree…
I made a pretty accurate model of the Entry/Proto launcher for Beyblade X. I mostly made it so I can model my own grip for it but also decided sharing is caring. F3D and Step files included. For my test prints I scaled it up by 1%, cut it…
Super simple grip for a Beyblade X Entry/Proto launcher. Printed with TPU, which I strongly recommend. I didn't tolerance this for rigid materials, so you might squeeze a launcher in but you'll never get it back without breaking the print.
See the picture for proper info: Models were split to separate objects. I have added few defense rings for dragoon and fixed the sizing issue with leg, shouldnt require glue anymore. laucher have option for double sized cord. Added…
More teeth on your winder? Good. Shitty bits to pull on it by? Bad. Have a vertical pulls set to make Long Winders suck less to use. The base piece requires TPU and 3+ walls good. The rest don't need to be TPU but feel better if they are,…
Simple box for three BeyBlade X Max diameter 52mm, height 46mm 25.03.26 - added raisers with storage Printing Tested from PETG, 3 walls, 4 top and bottom layers, 10% infill 6+ walls for latches and print them standing on the side Use…
This is very good for stamina types in Beyblade X and is an STL file. There are two files, one with slanted blocks and one without. The one that is slanted is better for stamina
I just wanted it for ease of access from Thingiverse. Thanks Imstynes.
Mini and Modular Beyblade X stadium with a working Xtreme Rail. Modular wall and pockets can be found with the original post. I changed the base of the stadium from a recessed circle to a sloped hexagon to encourage more movement in and…
A replacemend strip for a Beyblade strater. Print in TPU or other more “bendable” material. In my case i used stiff TPU. Also if possible print with a 0,25 nozzle
Print with as small as possible, with 100% infill for best results. I made it with 0.4mm nozzle, and it spins like a dream.
I have only tried with 0.4 tip and 0.2 layer hight 100% infill for a strong bond I recommend to print it this side without supports so the thread is perfect (the only drawback is that the layers might split during a heavy fight): Or on…
All Beyblade generations are supported (Except Beyblade G-Revolution) You need m2 screws or bolts It has almost the same mechanism as the original Winder Launcher. Beybattle Pass / Beylogger is not supported This is the Ripcord I…
This is a dual proto launcher system for Hasbro launchers. Very easy to make and use with the included dual ripcord puller. The puller is two connectors on top of eachother with rods connecting them. If the rods are too small for the…
A collection of ratchet locks ranging from 50mm - 90mm to replace any broken ones. There is a notch on one side of the ratchet lock that is flipped on some ratchets. I'm not sure if this is a left spin/right spin difference, but my cobolt…
Developed by AdegleLab/Adegleyoyos This is designed for professional Beyblade players, used to measure the torque required for the Burst between the Blade, Ratchet, and the Bits. This uses a ½" Torque wrench adapter. The material used is…
I wanted a longer grip piece so I made a little remix of the original one
To be clear, this is a remix of 3 different models mushed together to make One Thing. I really like Yacchi's Beyblade X Launcher Holder , but I found the belt clips to be a little too flimsy, and they snapped on me during use fairly…
This will work perfectly and exact on your hasbro proto starter launchers. Enjoy!
A MOD that customizes TAKARA TOMY's starter launcher into a hold launcher or sword launcher. After printing, you may need to trim or make minor adjustments to match the actual dimensions. There is no locking mechanism, so if you are…
Extra long ripcord for Beyblade X. This is as long as will fit on my 220x220 print surface. Separate files for the handle and the cord in order to maximize the length. The attachment is not totally solid so I just dropped some superglue…
I used .28 mm Layer height and 15% Infill on my Bambu Lab P1P
This Beyblade Launcher is designed to be as reliable as possible. It uses bearings and magnets for the stoper mechanic to reduce friction and down wear. You need 2x 608RS Bearings and 2x 8x3mm(or 2mm) Magnets (One 2x10mm Screw for the…
This custom bit changes mode mid battle. Utilizes the same system as Crimson Garuda where you can change the height of the bit before battle. Set the bit in high mode for an attack type bit, and set it to low height for a stamina type…
Uses less material than my BeybladeX Grip with a nice space on the left for any designs you may want to add to it if you have a Multi Color printer It's compatible with Official Beyblade X Grips You can super Glue it together but you can…
I print with 0.08 layer height with 100% in fill. (Beyblade not included)
This bit was inspired by the 230 spin track from Metal Fight. It is a free spinning bit that works better the lighter it is. Heavier bit = less stable.
Use 2mm layers for the metal piece and 1.5mm for the other parts. I didn't actually print this out of metal, so I don't know what the results of that. I used super glue to connect the parts together.
Supports are necessary Walls should be 2 or more Infill should be 30 or more depending on how heavy you want it
The original has really ornate detailing, I can't be bothered with that. Simplified all that geometry and added softer features all around.
Beyblade Collection Display & Organization Stands Perfect for organizing your growing Beyblade collection! As a fellow enthusiast who started collecting recently, I designed these stands to bring order to an ever-expanding collection…
Beyblade X String Launcher Grip - Handle This add-on attaches via M3 screws, no alterations are made to the launcher and the grip can be removed without leaving a blemish. One 25mm long M3 machine screw (24mm to 30mm will work) Two 12mm…
Possible to print in 2 colors with MMU to print logo Diameter : 40 cm
Didn’t you ever wondered to have a Beyblade that would never stop spinning just like in the original anime series? A Beyblade spinning and going after its opponent in the dish? Well, I dreamt about it too! Presenting A forever Beyblade…
A Beyblade is a type of spinning top toy that originated in Japan and has become a global phenomenon. The toy is typically used in battles, where players compete to see whose Beyblade can spin the longest, knock out the opponent’s…
needs 2 M2x12 (or longer) screws insertion of launchers is counter-intuitive: try it the other way around (last photo) //Edit: as suggested by @samweiss_839166 I added another version for heat set inserts (M3x3x3) and flathead screws.…
A modified version of Rolling ball by soullock on MakerWorld. I also made a 6mm version because I had 6mm glass balls and used that instead of a 3d printed ball. The connector has a very tight tolerance but should still fit or shrinking…
A hexagon style energy ring compatible with Metal Fusion Beyblades
I edited the Chainsaw Wheel by @BeauDean_1383840 to work with Metal Fusion Beyblades.
This is my version of the Limit Breaker DX Z might upgrade the design some time soon but the model already fits the BeyBlade tip perfectly!
I wanted a way to make a customizable and cheaper BeyBlade Beystadium. Works pretty well, it's small size does mean they are more likely to fly out but that could be more fun. You can use the customizable OpenSCAD file to make it any size…
YOU MUST NEED AN SPARE DRİVER İN ORDER TO MAKE THİS FUNCTİON!!! Basically use screws and spring on the spare driver also for best result use ABS.
spinning top with rack and pinion spinner like a beyblade kinda the more infill you use the longer it will spin snaps together with zero tolerance press fit mates. prints in 40 minutes at .20 speed pla settings
I present you first 3d printable Beyblade X stadium with Xtreme line, that works. Major features: -Central defense area with 2mm high wall allows bey to stay in center if you want it to -Reverse curvature. Outer ring of stadium is tilted…
It takes like a week of printing, and like 2kg of filament, if you can get a takara stadium, just do that, but well, thirld world problems. it uses 26 M3x20 and 14 M3x10 screws with their respective nuts print the rails at 6 perimeters…
EDIT: I previously uploaded the wrong starter interface file, it's been fixed This is a VERY high RPM Metal Fight Beyblade launcher that I designed. It can and will cause irreparable harm to you, your possessions, and anything in a 10ft…
does not need supports. but takes forever to print
a replacement part for the light launcher bushing to make it compatable with beyblade x you will need to remove the spinning peice from a proto launcher for this the regular winder and string launchers will not work they use a different…
I wanted to display/store by new beys on a skadis pegboard so made this use the hook from the original source file
print on PETG or something impact resistant you will need 2 10mm long wood screws, i think the nomination is 3.5x10
This is a 3D printable beyblade system. There are 8 parts. This assembly does not require screws or glue. Please feel free to edit the parts as required--Use the .STEP File Printer Settings
I thought an eraser could work well as a rubber tip but it didn't turn out as well as I'd hoped. This uses an eraser from a Ticonderoga NO.2 Pencil. Cut it from the base with a razor and slot it into the performance tip. make sure you…
This is a holster designed to carry the Hold Launcher on your hip. Included are files to carry it on either your right or left hip. UPDATE: *02 April 2025: Added a ring to the holster designed to hold your ripcord in case it does not fit…
This uses a cheaper mower pull starter thats $3.47 on Aliexpress. It performs just as well. https://www.aliexpress.us/item/3256806195013154.html?spm=a2g0o.order_list.order_list_main.47.21ef180229Uf79&gatewayAdapt=glo2usa
This is my take on the point bit for the Beyblade X system. Point is a balance bit I originally came across it in the Bite Croc and Sting Unicorn duel pack. I wanted a lower version of point and so came up with petal point, a version of…
Some snap-fit side pieces for Beyblade X Launcher Grips. They have some texture for better grippage, but are otherwise pretty sleek. Both sides are the same, so just print it twice! Also included a grip-less version on request, if you…
A custom Beyblade CX Assist Blade that provides some extra imbalance for harder hits! It aligns with the blade of Dran Brave so it stays protected. Included are a version that also aligns with a 1-60 ratchet for maximum imbalance, and an…
We thought it would be cool to experiment with the gimmick from Scorpion Sting as an Assist Blade. So we made it! As the bit spins during an X-rail, this assist blade will swap modes! It is not free-spin, and is locked to the rotation of…
Simple 3-compartment deckbox for Beyblade X use. Easily fits some foam cutouts for rattle-free fitment. Also it's mildly Gridfinity compatible, physically fits in the space for a 4ux2ux7u bin, might fit in a 6u height area meant for bins…
Combined the 6 piece arena floor to 2 pieces. Printing is meant to be done vertically to provide very smooth curved surface. Can fit 2x on one plate which makes the full floor. I printed with brim to make sure the mating surface stayed…
