1 / 1
Beyblade X Custom Bit: Under Kick
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Under Kick is a custom bit using the standard 12-gear configuration, with the same height as an Under Needle
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 603
- Makes
- 1
- Views
- 1,326
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
What if I take one of the best Balance bits of Beyblade X and stance it down.
That's Under kick!
This follows the same Height as an Under Needle
Print Settings [PLA]:
Layer Height - 0.12
Walls - 2
Infill - 50% Gyroid, Multiplier-2
Tree Supports (Auto)
Z distance - 0.18/0.2
Support Interface - Grid
Interface spacing - 0mm