Nilfisk reinforcement clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clamp to reinforce "handle pipe" with cracs in the end where the hose is connected.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Nilfisk reinforcement clamp
The “handle pipe” on my Nilfisk Aero 26 had small cracks in it that caused the hose to coupler to come loose. This clamp holds it together. I used a m3x16 screw to fasten it.
If you need a new hose coupler, @Lindh3D has made one: https://www.printables.com/model/617870-nilfisk-hose-coupler-replacement (compare with your original one, Nilfisk has different versions that look very similar).
Depending on the properties of the plastic printing with a brim can be a good idea. My first print failed due to warping.
Printed with PETG (https://www.prusa3d.com/product/violet-transparent-petg-filament-1kg/), Prusaslicer, filament setting: Prusa PETG, 0.2mm structural, 100%infill.
