P
PrintablesPouOu
Nilfisk Hose -> Dewalt Airlock Adapter
Adapter that fits some of Nilfisk's hoses. Used with @luma's Airlock model. Needs support.
- Pobrania
- 167
- Polubienia
- 24
- Ocena
- 0
Wyniki wyszukiwania: nilfisk
Liczymy pasujące modele…
P
PrintablesMASCHINFO
Adapter for vacuum cleaner hose - Nilfisk Buddy 2
Adapter for the vacuum cleaner hose from Nilfisk buddy 2 to HT50 pipe.
- Pobrania
- 148
- Polubienia
- 18
- Ocena
- 0
P
Printablespaan
Festool Nilfisk Vacuum adapter
This is an adapter for Festool for example a KS 60 and an vacuum cleaner from Nilfisk. Print Settings Printer Brand: Bambu Lab Printer: P1P Rafts: Yes Supports: Yes (Tree) Resolution: medium Infill: 50+% Filament: ABS
- Pobrania
- 147
- Polubienia
- 15
- Ocena
- 0
P
PrintablesAce
Nilfisk One Performance - Hose Clip
For Nilfisk One Performance Basic vacuum cleaner. No Supports. I did extra perimiters for 100% infill and faster printing. Also a brim was needed for me to get the print going, your mileage may vary. The new part is measured with calipers…
- Pobrania
- 147
- Polubienia
- 6
- Ocena
- 5
P
PrintablesLindh3D
Nilfisk hose coupler replacement
Replace your connector by forcing the hose off from the original coupler (don't cut the hose) by pulling hard on the hose and twisting at the same time. This will leave you with the Teflon ring still glued onto the hose. Now push the new…
- Pobrania
- 105
- Polubienia
- 11
- Ocena
- 4
P
Printablesironfounderson
Ryobi Router Vacuum Adapter for Nilfisk Multi II 30
The only difference between this model and the original is that the vacuum side is slightly smaller and has ribs around the inside. It is based on the R18TR-Hilti_VC20_40_60.stl file with the new part making the fit smaller. I printed the…
- Pobrania
- 99
- Polubienia
- 28
- Ocena
- 5
P
PrintablesRavenwreck
Nilfisk power washer inlet filter housing.
Power/pressure washer inlet filter housing for Nilfisk washer. Modeled this for a friend. Use the o-ring from your broken one and use some soap if the fit is tight. Thread is BSP ¾ with an small inbuilt negative offset so should have no…
- Pobrania
- 97
- Polubienia
- 8
- Ocena
- 5
P
PrintablesJohan
Makita Sander to Nilfisk vacuum adapter
Vacuum adapter for Makita BO3710 to Nilfisk
- Pobrania
- 97
- Polubienia
- 8
- Ocena
- 0
P
PrintablesJiří Šilhavík
Nilfisk vacuum cleaner hose hook replacement / náhrada háčku pro zavěšení hadice vysavače
Replacement for a broken hook for hanging the "Nilfisk Multi 20T" vacuum cleaner hose (maybe usable also for other types, but I haven't verified it). Náhrada za ulomený háček pro zavěšení hadice vysavače "Nilfisk Multi 20T" (možná bude…
- Pobrania
- 93
- Polubienia
- 17
- Ocena
- 0
P
PrintablesPedroKV
Nilfisk MULTI II 30 T hose splitter - rozdvojka na hadice k vysavači
CZ: Rozdvojka pro připojení 2 originálních hadic k vysavači Nilfisk MULTI II 30 T (mělo by pasovat i na sérii Aero) EN: Splitter for connecting 2 original hoses to vacuum cleaner Nilfisk MULTI II 30 T (should fit also Aero series) 3D:…
- Pobrania
- 84
- Polubienia
- 12
- Ocena
- 0
P
Printables2beers
Nilfisk Nassposterdüse Vacuum Tool
Customized version of https://www.thingiverse.com/thing:1571860 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1571860 Instructions Using the following options: Base_Diameter = 32.2 Base_Overlap = 35…
- Pobrania
- 83
- Polubienia
- 4
- Ocena
- 5
P
PrintablesFaber
2 type of Nilfisk Vacum cleaner extension nozzle
These are extensions of the Nilfisk Vacuum Cleaner Buddy II, but it can be used with any vacuum cleaner that has the hose with an internal diameter of 35 mm. Total length 240 mm There 2 models: One has a small angled tip and the second…
- Pobrania
- 81
- Polubienia
- 7
- Ocena
- 0
P
PrintablesSticky Steve
Nilfisk Pressure washer spraygun wallmount
For easy storage and acces i made this mount to hold the spraygun of my pressurewasher. Check if your spraygun is the same, the opening is 21mm. The holes will fit up to 5mm (wood)screws.
- Pobrania
- 80
- Polubienia
- 8
- Ocena
- 0
P
Printableskmonster
Nilfisk Spiral Hose Adapter for 50 mm PU hose
Für den Betrieb an einer Absauganlage mit einem 50 mm Spiralschlauch mit einer Spiralsteigung von 14,5 mm und einem Innendurchmesser von 50 mm an den Nilfisk Attix 30
- Pobrania
- 80
- Polubienia
- 11
- Ocena
- 0
P
PrintablesKinetik
50 mm Alto Nilfisk Wap tube / hose to DN50 tube /pipe
I needed an adapter to connect my vacuum system to a 50 mm ID flexible vacuum tube. This hose adapter (50 mm ID) is able to connect to a DN 50 mm OD pipe directly. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No…
- Pobrania
- 79
- Polubienia
- 4
- Ocena
- 0
P
PrintablesHansK
Adapter for D32/37 hose for Nilfisk - Multi II 30 T Inox VSC
Printed in PLA No supports
- Pobrania
- 77
- Polubienia
- 8
- Ocena
- 0
P
PrintablesSam
Cable Hook for Nilfisk Attix 30
As the Nilfisk Attix 30 vacuum cleaner does not provide any convenient mechanism for storing the power cable and the hose, I designed a hook for it. The hook can be put at the rear side and once clicked onto the handle stays there…
- Pobrania
- 68
- Polubienia
- 7
- Ocena
- 5
P
PrintablesSindre
Nilfisk vacuum attachment
Just a quick and rough solution for a broken vacuum adapter / attachment to the device.
- Pobrania
- 67
- Polubienia
- 6
- Ocena
- 0
P
PrintablesStump1221
Camlock adapter for Nilfisk Multi ii
I was tired of the handle when using power tools. The locking ring broke, which made me adapt to the camlock system. Preconditions to use this adapter: You need to cut the hose to use it. You need the female Camlock adapter:…
- Pobrania
- 63
- Polubienia
- 16
- Ocena
- 5
P
PrintablesGeoJdk
Nilfisk Pressure washer water intake filter adaptor
This filter adaptor is for the low pressure side of the Nilfisk pressure washer. It's a part that might break if someone add a force at the water intake connector. If broken, the machine is useless, while this filter adaptor is not…
- Pobrania
- 62
- Polubienia
- 4
- Ocena
- 0
P
PrintablesKinetik
Festool CS70EB to 50 mm Alto Nilfisk Wap tube / hose
I needed an adapter to connect my Festool CS70EB table saw to my shop vacuum system. This hose adapter is able to connect to a 50 mm ID tube directly. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No…
- Pobrania
- 60
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRune Frost
Bracket for MTM short gun - Nilfisk Pressure washer
You can print it “as is” or you can print it in two pieces, and mount it together. I have made room for 3mm threaded inserts. It replaces the original mount.
- Pobrania
- 58
- Polubienia
- 9
- Ocena
- 0
P
PrintablesCharlie W
Nilfisk/Milwaukee Dust Collector Quick Connect to 2-1/4" Adapter
Printed in 4 walls 35% infill out of petg-cf which came out incredibly strong. Print it with the large 57mm end on the build plate. Make sure normal support (snug) is on for the small section in the middle where the snap lock goes. I also…
- Pobrania
- 57
- Polubienia
- 8
- Ocena
- 0
P
Printablesprintberg
Nilfisk 36mm Telescopic Tube Bracket
The bracket for my Nilfisk Telescopic tube bracket split in half a few years ago. Now I finally sat down to spend the 5 minutes to create a replacement bracket. I printed using 0,6mm nozzle, 4 perimeters, 0,35mm layer height with no…
- Pobrania
- 56
- Polubienia
- 8
- Ocena
- 0
P
PrintablesSebastianmaklary
Vacuum cleaner tool for radiator, mouthpiece for NILFISK
Mouthpiece for https://www.thingiverse.com/thing:4748907 but which fits a NILFISK vacuum cleaner by having a constant inner diameter of 31,9mm for the first 20mm. It is a slight press fit onto the original part. Category: Hand Tools
- Pobrania
- 55
- Polubienia
- 5
- Ocena
- 0
P
PrintablesVladimír Waas
Adapter for vacuum cleaner Nilfisk to DeWalt orbital grinder
printed from flex filament
- Pobrania
- 50
- Polubienia
- 4
- Ocena
- 0
P
PrintablesVladimír Waas
Nozzle for Nilfisk industrial vacuum cleaner
for vacuuming large pieces of rubbish such as wood shavings
- Pobrania
- 48
- Polubienia
- 3
- Ocena
- 0
P
PrintablesKinetik
Cyclone to 50 mm Alto Nilfisk Wap tube / hose
I needed an adapter to connect my cyclone to a 50 mm ID flexible vacuum tube. This hose adapter (50 mm ID) is able to connect to a typical cyclone (for me it is an Dust Commander clone) directly. Print Settings Printer Brand: Anycubic…
- Pobrania
- 47
- Polubienia
- 6
- Ocena
- 0
P
Printablesd4v
hose adapter - old Nilfisk to Bosch green
i wanted to user my old vacuum cleaner for my Bosch multitool. I ordered Bosch 2609256d57 which also fits on GOP 12V-28 (Bosch blue series) as well as green Multitools. i designed a hose to fit my old Nilfisk GS-90 vacuum cleaner (i think…
- Pobrania
- 47
- Polubienia
- 6
- Ocena
- 0
P
PrintablesR34_Danny
nilfisk saltix 10 Attachment
My grilfried brike the part that on the stick where you put it in the vacuum cleaner it self. So i made a new one from ABS. Works good again.
- Pobrania
- 46
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBent Derailleur
Dyson to Nilfisk adapter
Fits 35mm (inner diameter) accessories (slightly tapered, 34mm in beginning).
- Pobrania
- 42
- Polubienia
- 6
- Ocena
- 0
P
PrintablesSot Kon
Nilfisk buddy 2 vacuum cleaner base
Easy print in place Nilfisk buddy 2 base Settings: 0.2 quality 100% infill for maximum holding power Pla - Abs -Petg are good for this print You need 3 pieces bolts M4 with washers and nuts. Njoy All comments are welcome Below is the link…
- Pobrania
- 41
- Polubienia
- 2
- Ocena
- 0
P
PrintablesZeb
Nilfisk wheel and splint for rolling mouthpiece
Print the splint with all wallls or 100% infil. I recommend 3-4 walls for the wheel. Use V2 as it requires less support to print. I used PLA but any material will do.
- Pobrania
- 39
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKinetik
Scheppach BTS900 to 50 mm Alto Nilfisk Wap tube / hose
I needed an adapter to connect my Scheppach BTS900 to my shop vacuum system. This hose adapter is able to connect to a 50 mm ID tube directly. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No…
- Pobrania
- 36
- Polubienia
- 5
- Ocena
- 0
P
PrintablesWubbe93
Wheels to Nilfisk vacuum cleaner
Self made things, so my vacuum cleaners pipe can roll again, after i have miss the orignals wheels Print in PLA Print with 15 % infil
- Pobrania
- 35
- Polubienia
- 6
- Ocena
- 0
P
PrintablesKinetik
Scheppach HBS261 to 50 mm Alto Nilfisk Wap tube / hose
I needed an adapter to connect my Scheppach HBS261 to my shop vacuum system. This hose adapter is able to connect to a 50 mm ID tube directly. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No…
- Pobrania
- 34
- Polubienia
- 2
- Ocena
- 0
P
PrintablesStephan
Nilfisk Buddy II 12L Halter Staubsaugerrohr
Ersatzhalter für das Staubsaugerrohr vom Nilfisk Buddy 12L da der originale abgebrochen war und nicht als Ersatzteil erhältlich ist. Mit der originalen Schraube kann das Teil an das Staubsaugerrohr geklemmt werden. Ich hab es wegen der…
- Pobrania
- 32
- Polubienia
- 1
- Ocena
- 0
P
Printablesalex
Adaptor from Nilfisk vacuum to Bosch Professional table saw and miter saw
Adaptor that fits Nilfisk Buddy II 12 hose and Bosch Professional tablesaw and mitersaw, might fit other tools as well. Recommend printing in PETG or ABS for strengt and durability. Print upright with support for the bridge over the clips…
- Pobrania
- 32
- Polubienia
- 5
- Ocena
- 0
P
PrintablesLars
Nilfisk Attix plug
This is a plug for Nilfisk Attix shop vacs in situations where you want to transport the shop vac without the hose plugged in. To avoid dust escaping the gaping hole, use this plug. Mine is used on a Nilfisk Alto Attix 360 - 21 and is…
- Pobrania
- 32
- Polubienia
- 3
- Ocena
- 0
P
PrintablesVilhelm P
Nilfisk Camlock (50mm) Adaptor
This part is combined with this camlock connector . I have printed mine in PLA and seems plenty strong for now. No big mystery regarding printing options. I used 3 perimeters, 0,15 layer height and 20% gyroid infill. I could se a future…
- Pobrania
- 31
- Polubienia
- 3
- Ocena
- 0
P
Printablesigeee
Nilfisk Multi II 30T Rohrhalterung/ hose holder
Rohrhalterung für den Nilfisk Multi II 30T. Der sollte auch kompatibel mit einigen anderen Nilfisk Saugern sein mit 35er Rohrdurchmesser. Für die Rohrhalterung zu verschrauben wird ein Gewindeeinsatz zum einschmelzen und eine M3X10…
- Pobrania
- 30
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMartin
Nilfisk Coupe Special Hose Handle Clip
Print it -→ Clip in on -→ vacuum your home to show printer invest was worth it and wife is happy
- Pobrania
- 27
- Polubienia
- 2
- Ocena
- 0
P
PrintablesL7899
Nilfisk 107402774 tube holder
Nilfisk Multi II 30 T INOX VSC tube holder for aluminium 35mm tube. Tried finding this is shops to purchase, but was not available in my country.
- Pobrania
- 26
- Polubienia
- 6
- Ocena
- 0
P
PrintablesJordam Westerink
Nilfisk Elite Series - Tube Parking Clip (Repl. 128350157)
Replacement Parking Clip for Nilfisk Elite Series (Repl. 128350157) This is a replacement "parking clip" (tube holder) for Nilfisk Elite vacuum cleaners. The original part is known to be fragile and often breaks after prolonged use.…
- Pobrania
- 25
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMixi
Nilfisk vacuum cleaner suction regulator
Should be printed in vertical position, so the locks do not break. Supports are needed mostly to create large enough contact layer. OpenSCAD source included, I'm sorry for sparse comments and short variable names, but I'm too lazy right…
- Pobrania
- 23
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJan Stanka
Nilfisk Aero hose holder
Hose (or cable) holder for Nilfisk Aero 31-21 vacuum cleaner (may be for similar from this range) - spare part. Print Settings Printer: BIQU BX Rafts: No **Supports:** Yes Resolution: 0.2 **Infill:** 50 Filament: Fiberlogy Nylon black…
- Pobrania
- 22
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBent Derailleur
Makita sander Nilfisk adapter
Adapter to fit your vacuum cleaner to your sander. It is slightly conical but dimensions in the middle are about 22.5 inner and 25.5 outer, diameter in mm. Print in TPU. If you like my work, consider buying me a coffee:…
- Pobrania
- 21
- Polubienia
- 10
- Ocena
- 0
P
Printables3DPrintDemon
Nilfisk Multi II 30T Vacuum Clip Guards
…Please be sure to hit like & post a make, I'd love to see your prints! Stop clips from accidentally opening when snagged while carrying the vacuum. Print standing up on bottom surface, mine were printed in PLA+ with a 0.6mm nozzle &…
- Pobrania
- 21
- Polubienia
- 6
- Ocena
- 0
P
PrintablesOlaznog_sp
Nilfisk Power Vacuum Hose Adapter / Connector
Nilfisk Power Vacuum Hose Adapter / Connector The plastic tabs on my original Nilfisk Power P10 vacuum tube connector eventually snapped off, causing the hose to disconnect with even the slightest pull. Since the manufacturer doesn't sell…
- Pobrania
- 20
- Polubienia
- 1
- Ocena
- 5
P
PrintablesReseke Inovation
Nilfisk One Dust Bag Holder
This is a replacement part for the Nilfisk One dust bag holder. It comes in to versions: Nilfisk_One: A complet part, that can be printet in one go. Nilfisk_One_Parts: The model have been split in too and need glue to combine them.
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
PrintablesLittleHobbyShop
Nilfisk Nozzle Adaptor
This a part designed to fit the Nilfisk rubber vacuum nozzle pictured (printed with part number 107401562). The rubber nozzle fits inside this part. It may be compatible with other vacuum nozzles, the port opening is 36mm across with a…
- Pobrania
- 18
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPreRas
Vacuum holder cone for Nilfisk Buddy II 12
The adapter broke on my vacuum, so “unfortunately” I had to print one myself. Available at Onshape for you own modification: https://cad.onshape.com/documents/6b92f108b729211ad097d3e7/w/8c30fd4005eba666e55889fc/e/6ab03e459e514698aaa2a8bd
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMatěj Slíva
Replacement bottle for Nilfisk Super Foamsprayer
🇬🇧 English: This is a custom-designed replacement container for the Nilfisk Super Foamsprayer. It features a compatible thread for the adjustable foam head. Ideal if your original bottle is cracked or if you want to have multiple bottles…
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
Printableseloekset
Nilfisk vacuum cleaner attachment
The extension wand has become looser over the years, so I made an adapter between the extension wand and the handle to make a tighter fit. Printed with ABS 3 perimeters, 50% infill, 10mm brim width and support everywhere
- Pobrania
- 16
- Polubienia
- 0
- Ocena
- 0
P
PrintablesTotally Feral
Nilfisk aero 26 to dewalt DCW210 Sander
Ideal for the Nilfisk Aero 26 and the Dewalt dcw210 Sander it has gotten me out of a pinch a couple of times I have other versions in the making which I will post when complete please bare with me I am extremely new to cad and self taught…
- Pobrania
- 16
- Polubienia
- 9
- Ocena
- 0
P
PrintablesDengamleninja
Nilfisk VP930 HEPA Adaptors
COMMERCIAL LICENSE ACCESS is available through a patreon membership where you help support me and get commercial license which applies to all my models except remixes i made from others work. https://www.patreon.com/Dengamleninja
- Pobrania
- 15
- Polubienia
- 0
- Ocena
- 0
P
PrintablesVitek T
Nilfisk - air filter holder / Drzak filtru
Air filter holder with thread. ----------------------------- Drzak filtru se zavitem.
- Pobrania
- 14
- Polubienia
- 1
- Ocena
- 0
P
PrintablesCarsten Sørensen
Nilfisk Buddy II adapter to Toolson
An adapter to connect Toolson giraffe sander hose directly into the Nilfisk Buddy II vacumcleaner. A nice tight fit, so you don't need to connect the two hoses, if you don't have a converter. It's made to stick out, for easy removal and…
- Pobrania
- 14
- Polubienia
- 2
- Ocena
- 0
P
Printablesyogi
Thread Protector Pressure Washer - Gewindeschutz M22 Hochdruckreiniger (Kränzle, Kärcher, Nilfisk)
I have slightly modified the thread so that it can be easily screwed onto high-pressure lances. It protects the thread when the lance is not in use. Thread type: M22 × 1.5 mm ******* Ich habe das Gewinde etwas angepasst, damit es gut auf…
- Pobrania
- 14
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMichael Jones
Vacuum Cleaner Power Tool Adapter (Nilfisk x Ryobi)
Adapter designed to fit a nilfisk bravo vacuum cleaner to my tools. This works for both a ryobi orbital sander and a black and decker jigsaw.
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
PrintablesoschultzHH
Adapter C35 to Nilfisk
Print with 4 layers. Needs supports (all). First proof of concept with PLAr is working fine. So PETg(r) will follow. Just an example that the Prusaslicer is good enough to bypass CAD-Programms;-) With a little bit more further work it may…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAntimaterie
Makita/Nilfisk shopvac 63mm hose adapter
This an adapter to a 63mm air hose to a makita shopvac. It will work definitely with models: VC2000L VC2013L VC2512L, VC4210 and possible VC30xx series. Also works with Nilfisk ATTIX 33 and 44 as well as many other brands Print…
- Pobrania
- 10
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJakob
NILFISK Handrohr 36mm Ersatz Verbindungsstück
Mir ist das oroginal Verbindungsstück gebrochen. System 36/32
- Pobrania
- 8
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMakebruksting
Nilfisk reinforcement clamp
Nilfisk reinforcement clamp The “handle pipe” on my Nilfisk Aero 26 had small cracks in it that caused the hose to coupler to come loose. This clamp holds it together. I used a m3x16 screw to fasten it. If you need a new hose coupler,…
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesScheer85
Nilfisk to DN40
Dies ist ein Adapter für den Nilfisk Alto Aero 21 INOX auf ein DN40 Lehrrohr. Gedruckt mit 0.4er Nozzle, 0,2 layer, ohne Supports in PETG. -------- This is an adapter for the Nilfisk Alto Aero 21 INOX to a DN40 pipe. Printed with a 0.4mm…
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesNextGenHen
Nilfisk Adapter for Cyclone Vacuum Dust Separator
Adapter to be able to fit a Nilfisk vacuum (34mm outer diameter) directly into the Cyclone Vacuum Dust Separator.
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
Printablesguyjami
Guide rail for Nilfisk GM 200/300/400 vacuum cleaner bag with dust control Ref: 21907600
You'll find french explanations on my website : https://labidulerie.vicou.be/guide-sac-nilfisk-gm200-300-400/ I had lost the original part and it is no longer available on the market. It is inserted obliquely and clips from below. It is…
- Pobrania
- 6
- Polubienia
- 3
- Ocena
- 0
P
PrintablesHarpalyke
Makita 5M 28mm hose to Nilfisk Aero connector
This adapter allows the use of the Makita 195436-7 hose for the VC013GL with a Nilfisk Aero vacuum.
- Pobrania
- 5
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSimpsonB3D
Lupe adaper for Nilfisk 33.5mm Int. Diam pipes
Printed with eSun PETG upright at 0.16mm layers and 4 perimeters. Solid enough. Original adpated in Prusaslicer using modifiers. Other slicers may not work.
- Pobrania
- 4
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMartijnD
Nilfisk One vacuumcleaner tool holder
Recently bought a Nilfisk One vacuum cleaner. This came with 4 attachements. 2 of them are neatly stored inside the vacuum cleaner which is really convenient. But the other 2 just kept laying around the house. So i created a holder for…
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesWetdesign
Nilfisk pressure washer - outlet release accessory
Pressure washer nut was stuck and I could not open it with large pliers without damage. Pliers distort the nut. This part fits on top of the Nilfisk nuts with matching 15 grooves and a hexagonal nut for your large wrench. I printed it…
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
PrintablesNickbalis
Nilfisk Lance Holder 128500104 / Pressure washer gun holder
Mine broke so I designed a new one. I attached the sldprt in case you need to make changes. I printed with PETG 4 walls and 15% infill. In the picture it looks a lot larger, I've changed it to be a bit smaller.
- Pobrania
- 0
- Polubienia
- 1
- Ocena
- 0
P
Printableslomamba
Nilfisk E 145.4 attatchments
1 organiser for spray gun + nozzels. 1 holder for spraygun. Screws or metal mount not included, i bought those at my local hardwarestore,
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables
Adaptor from Nilfisk vacuum to Bosch Professional table saw and miter saw
Adaptor that fits Nilfisk Buddy II 12 hose and Bosch Professional tablesaw and mitersaw, might fit other tools as well. Recommend printing in PETG or ABS for strengt and durability. Print upright with support for the bridge over the clips…
P
Printables
2 type of Nilfisk Vacum cleaner extension nozzle
These are extensions of the Nilfisk Vacuum Cleaner Buddy II, but it can be used with any vacuum cleaner that has the hose with an internal diameter of 35 mm. Total length 240 mm There 2 models: One has a small angled tip and the second…
P
Printables
Nilfisk One Dust Bag Holder
This is a replacement part for the Nilfisk One dust bag holder. It comes in to versions: Nilfisk_One: A complet part, that can be printet in one go. Nilfisk_One_Parts: The model have been split in too and need glue to combine them.
P
Printables
Nilfisk One vacuumcleaner tool holder
Recently bought a Nilfisk One vacuum cleaner. This came with 4 attachements. 2 of them are neatly stored inside the vacuum cleaner which is really convenient. But the other 2 just kept laying around the house. So i created a holder for…
P
Printables
Nilfisk aero 26 to dewalt DCW210 Sander
Ideal for the Nilfisk Aero 26 and the Dewalt dcw210 Sander it has gotten me out of a pinch a couple of times I have other versions in the making which I will post when complete please bare with me I am extremely new to cad and self taught…
P
Printables
Makita/Nilfisk shopvac 63mm hose adapter
This an adapter to a 63mm air hose to a makita shopvac. It will work definitely with models: VC2000L VC2013L VC2512L, VC4210 and possible VC30xx series. Also works with Nilfisk ATTIX 33 and 44 as well as many other brands Print…