Camlock adapter for Nilfisk Multi ii
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for Nilfisk Multi ii to adapt to the Camlock system
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 63
- Wydruki
- 1
- Wyświetlenia
- 708
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was tired of the handle when using power tools. The locking ring broke, which made me adapt to the camlock system.
Preconditions to use this adapter:
You need to cut the hose to use it.
You need the female Camlock adapter: https://www.printables.com/model/461256-shopvac-50mm-camlock-connectors-with-magnetic-catc
You need an adapter for the hose to fit the Camlock female adapter: https://www.printables.com/model/493835-camlock-adapter-for-35-75mm-hoses
To use this adapter:
Remove the locking ring from the original Nilfisk adapter
Cut the adapter off the hose
Take the sealing ring off the original adapter and move it to the new part
The new adapter fits into a slot in the handle and has to be glued the handle.
Prints without support. I printed in PLA and with 50% infill, 0.15 layer height, not neccesary but i like these tools to be in a good quality.