Nilfisk Camlock (50mm) Adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have made a camlock adaptor for Nilfisk Attix vacuum - 36mm hose system
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This part is combined with this camlock connector.
I have printed mine in PLA and seems plenty strong for now. No big mystery regarding printing options. I used 3 perimeters, 0,15 layer height and 20% gyroid infill.
I could se a future update where I merge this part with the camlock adaptor itself, so there are no need for all the thread. This could also improve the inside funnel, so there are less obstruction for dust to get caught on. As I have printed this for now, it will be on request (feel free to reach out) or if my own part causes trouble.
This model might work with some Milwaukee vacuums.