Search results: nilfisk

Counting matching models…

PrintablesPouOu

Nilfisk Hose -> Dewalt Airlock Adapter

Adapter that fits some of Nilfisk's hoses. Used with @luma's Airlock model. Needs support.

Downloads: 167
Likes: 24
Rating: 0

Order a print of this model

PrintablesMASCHINFO

Adapter for vacuum cleaner hose - Nilfisk Buddy 2

Adapter for the vacuum cleaner hose from Nilfisk buddy 2 to HT50 pipe.

Downloads: 148
Likes: 18
Rating: 0

Order a print of this model

Printablespaan

Festool Nilfisk Vacuum adapter

This is an adapter for Festool for example a KS 60 and an vacuum cleaner from Nilfisk. Print Settings Printer Brand: Bambu Lab Printer: P1P Rafts: Yes Supports: Yes (Tree) Resolution: medium Infill: 50+% Filament: ABS

Downloads: 147
Likes: 15
Rating: 0

Order a print of this model

PrintablesAce

Nilfisk One Performance - Hose Clip

For Nilfisk One Performance Basic vacuum cleaner. No Supports. I did extra perimiters for 100% infill and faster printing. Also a brim was needed for me to get the print going, your mileage may vary. The new part is measured with calipers…

Downloads: 147
Likes: 6
Rating: 5

Order a print of this model

PrintablesLindh3D

Nilfisk hose coupler replacement

Replace your connector by forcing the hose off from the original coupler (don't cut the hose) by pulling hard on the hose and twisting at the same time. This will leave you with the Teflon ring still glued onto the hose. Now push the new…

Downloads: 105
Likes: 11
Rating: 4

Order a print of this model

Printablesironfounderson

Ryobi Router Vacuum Adapter for Nilfisk Multi II 30

The only difference between this model and the original is that the vacuum side is slightly smaller and has ribs around the inside. It is based on the R18TR-Hilti_VC20_40_60.stl file with the new part making the fit smaller. I printed the…

Downloads: 99
Likes: 28
Rating: 5

Order a print of this model

PrintablesRavenwreck

Nilfisk power washer inlet filter housing.

Power/pressure washer inlet filter housing for Nilfisk washer. Modeled this for a friend. Use the o-ring from your broken one and use some soap if the fit is tight. Thread is BSP ¾ with an small inbuilt negative offset so should have no…

Downloads: 97
Likes: 8
Rating: 5

Order a print of this model

PrintablesJohan

Makita Sander to Nilfisk vacuum adapter

Vacuum adapter for Makita BO3710 to Nilfisk

Downloads: 97
Likes: 8
Rating: 0

Order a print of this model

PrintablesJiří Šilhavík

Nilfisk vacuum cleaner hose hook replacement / náhrada háčku pro zavěšení hadice vysavače

Replacement for a broken hook for hanging the "Nilfisk Multi 20T" vacuum cleaner hose (maybe usable also for other types, but I haven't verified it). Náhrada za ulomený háček pro zavěšení hadice vysavače "Nilfisk Multi 20T" (možná bude…

Downloads: 93
Likes: 17
Rating: 0

Order a print of this model

PrintablesPedroKV

Nilfisk MULTI II 30 T hose splitter - rozdvojka na hadice k vysavači

CZ: Rozdvojka pro připojení 2 originálních hadic k vysavači Nilfisk MULTI II 30 T (mělo by pasovat i na sérii Aero) EN: Splitter for connecting 2 original hoses to vacuum cleaner Nilfisk MULTI II 30 T (should fit also Aero series) 3D:…

Downloads: 84
Likes: 12
Rating: 0

Order a print of this model

Printables2beers

Nilfisk Nassposterdüse Vacuum Tool

Customized version of https://www.thingiverse.com/thing:1571860 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1571860 Instructions Using the following options: Base_Diameter = 32.2 Base_Overlap = 35…

Downloads: 83
Likes: 4
Rating: 5

Order a print of this model

PrintablesFaber

2 type of Nilfisk Vacum cleaner extension nozzle

These are extensions of the Nilfisk Vacuum Cleaner Buddy II, but it can be used with any vacuum cleaner that has the hose with an internal diameter of 35 mm. Total length 240 mm There 2 models: One has a small angled tip and the second…

Downloads: 81
Likes: 7
Rating: 0

Order a print of this model

PrintablesSticky Steve

Nilfisk Pressure washer spraygun wallmount

For easy storage and acces i made this mount to hold the spraygun of my pressurewasher. Check if your spraygun is the same, the opening is 21mm. The holes will fit up to 5mm (wood)screws.

Downloads: 80
Likes: 8
Rating: 0

Order a print of this model

Printableskmonster

Nilfisk Spiral Hose Adapter for 50 mm PU hose

Für den Betrieb an einer Absauganlage mit einem 50 mm Spiralschlauch mit einer Spiralsteigung von 14,5 mm und einem Innendurchmesser von 50 mm an den Nilfisk Attix 30

Downloads: 80
Likes: 11
Rating: 0

Order a print of this model

PrintablesKinetik

50 mm Alto Nilfisk Wap tube / hose to DN50 tube /pipe

I needed an adapter to connect my vacuum system to a 50 mm ID flexible vacuum tube. This hose adapter (50 mm ID) is able to connect to a DN 50 mm OD pipe directly. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No…

Downloads: 79
Likes: 4
Rating: 0

Order a print of this model

PrintablesHansK

Adapter for D32/37 hose for Nilfisk - Multi II 30 T Inox VSC

Printed in PLA No supports

Downloads: 77
Likes: 8
Rating: 0

Order a print of this model

PrintablesSam

Cable Hook for Nilfisk Attix 30

As the Nilfisk Attix 30 vacuum cleaner does not provide any convenient mechanism for storing the power cable and the hose, I designed a hook for it. The hook can be put at the rear side and once clicked onto the handle stays there…

Downloads: 68
Likes: 7
Rating: 5

Order a print of this model

PrintablesSindre

Nilfisk vacuum attachment

Just a quick and rough solution for a broken vacuum adapter / attachment to the device.

Downloads: 67
Likes: 6
Rating: 0

Order a print of this model

PrintablesStump1221

Camlock adapter for Nilfisk Multi ii

I was tired of the handle when using power tools. The locking ring broke, which made me adapt to the camlock system. Preconditions to use this adapter: You need to cut the hose to use it. You need the female Camlock adapter:…

Downloads: 63
Likes: 16
Rating: 5

Order a print of this model

PrintablesGeoJdk

Nilfisk Pressure washer water intake filter adaptor

This filter adaptor is for the low pressure side of the Nilfisk pressure washer. It's a part that might break if someone add a force at the water intake connector. If broken, the machine is useless, while this filter adaptor is not…

Downloads: 62
Likes: 4
Rating: 0

Order a print of this model

PrintablesKinetik

Festool CS70EB to 50 mm Alto Nilfisk Wap tube / hose

I needed an adapter to connect my Festool CS70EB table saw to my shop vacuum system. This hose adapter is able to connect to a 50 mm ID tube directly. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No…

Downloads: 60
Likes: 2
Rating: 0

Order a print of this model

PrintablesRune Frost

Bracket for MTM short gun - Nilfisk Pressure washer

You can print it “as is” or you can print it in two pieces, and mount it together. I have made room for 3mm threaded inserts. It replaces the original mount.

Downloads: 58
Likes: 9
Rating: 0

Order a print of this model

PrintablesCharlie W

Nilfisk/Milwaukee Dust Collector Quick Connect to 2-1/4" Adapter

Printed in 4 walls 35% infill out of petg-cf which came out incredibly strong. Print it with the large 57mm end on the build plate. Make sure normal support (snug) is on for the small section in the middle where the snap lock goes. I also…

Downloads: 57
Likes: 8
Rating: 0

Order a print of this model

Printablesprintberg

Nilfisk 36mm Telescopic Tube Bracket

The bracket for my Nilfisk Telescopic tube bracket split in half a few years ago. Now I finally sat down to spend the 5 minutes to create a replacement bracket. I printed using 0,6mm nozzle, 4 perimeters, 0,35mm layer height with no…

Downloads: 56
Likes: 8
Rating: 0

Order a print of this model

PrintablesSebastianmaklary

Vacuum cleaner tool for radiator, mouthpiece for NILFISK

Mouthpiece for https://www.thingiverse.com/thing:4748907 but which fits a NILFISK vacuum cleaner by having a constant inner diameter of 31,9mm for the first 20mm. It is a slight press fit onto the original part. Category: Hand Tools

Downloads: 55
Likes: 5
Rating: 0

Order a print of this model

PrintablesVladimír Waas

Adapter for vacuum cleaner Nilfisk to DeWalt orbital grinder

printed from flex filament

Downloads: 50
Likes: 4
Rating: 0

Order a print of this model

PrintablesVladimír Waas

Nozzle for Nilfisk industrial vacuum cleaner

for vacuuming large pieces of rubbish such as wood shavings

Downloads: 48
Likes: 3
Rating: 0

Order a print of this model

PrintablesKinetik

Cyclone to 50 mm Alto Nilfisk Wap tube / hose

I needed an adapter to connect my cyclone to a 50 mm ID flexible vacuum tube. This hose adapter (50 mm ID) is able to connect to a typical cyclone (for me it is an Dust Commander clone) directly. Print Settings Printer Brand: Anycubic…

Downloads: 47
Likes: 6
Rating: 0

Order a print of this model

Printablesd4v

hose adapter - old Nilfisk to Bosch green

i wanted to user my old vacuum cleaner for my Bosch multitool. I ordered Bosch 2609256d57 which also fits on GOP 12V-28 (Bosch blue series) as well as green Multitools. i designed a hose to fit my old Nilfisk GS-90 vacuum cleaner (i think…

Downloads: 47
Likes: 6
Rating: 0

Order a print of this model

PrintablesR34_Danny

nilfisk saltix 10 Attachment

My grilfried brike the part that on the stick where you put it in the vacuum cleaner it self. So i made a new one from ABS. Works good again.

Downloads: 46
Likes: 4
Rating: 0

Order a print of this model

PrintablesBent Derailleur

Dyson to Nilfisk adapter

Fits 35mm (inner diameter) accessories (slightly tapered, 34mm in beginning).

Downloads: 42
Likes: 6
Rating: 0

Order a print of this model

PrintablesSot Kon

Nilfisk buddy 2 vacuum cleaner base

Easy print in place Nilfisk buddy 2 base Settings: 0.2 quality 100% infill for maximum holding power Pla - Abs -Petg are good for this print You need 3 pieces bolts M4 with washers and nuts. Njoy All comments are welcome Below is the link…

Downloads: 41
Likes: 2
Rating: 0

Order a print of this model

PrintablesZeb

Nilfisk wheel and splint for rolling mouthpiece

Print the splint with all wallls or 100% infil. I recommend 3-4 walls for the wheel. Use V2 as it requires less support to print. I used PLA but any material will do.

Downloads: 39
Likes: 1
Rating: 0

Order a print of this model

PrintablesNicklascs

nilfisk vacuum holder

Downloads: 36
Likes: 7
Rating: 0

Order a print of this model

PrintablesKinetik

Scheppach BTS900 to 50 mm Alto Nilfisk Wap tube / hose

I needed an adapter to connect my Scheppach BTS900 to my shop vacuum system. This hose adapter is able to connect to a 50 mm ID tube directly. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No…

Downloads: 36
Likes: 5
Rating: 0

Order a print of this model

PrintablesWubbe93

Wheels to Nilfisk vacuum cleaner

Self made things, so my vacuum cleaners pipe can roll again, after i have miss the orignals wheels Print in PLA Print with 15 % infil

Downloads: 35
Likes: 6
Rating: 0

Order a print of this model

PrintablesKinetik

Scheppach HBS261 to 50 mm Alto Nilfisk Wap tube / hose

I needed an adapter to connect my Scheppach HBS261 to my shop vacuum system. This hose adapter is able to connect to a 50 mm ID tube directly. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No…

Downloads: 34
Likes: 2
Rating: 0

Order a print of this model

PrintablesStephan

Nilfisk Buddy II 12L Halter Staubsaugerrohr

Ersatzhalter für das Staubsaugerrohr vom Nilfisk Buddy 12L da der originale abgebrochen war und nicht als Ersatzteil erhältlich ist. Mit der originalen Schraube kann das Teil an das Staubsaugerrohr geklemmt werden. Ich hab es wegen der…

Downloads: 32
Likes: 1
Rating: 0

Order a print of this model

Printablesalex

Adaptor from Nilfisk vacuum to Bosch Professional table saw and miter saw

Adaptor that fits Nilfisk Buddy II 12 hose and Bosch Professional tablesaw and mitersaw, might fit other tools as well. Recommend printing in PETG or ABS for strengt and durability. Print upright with support for the bridge over the clips…

Downloads: 32
Likes: 5
Rating: 0

Order a print of this model

PrintablesLars

Nilfisk Attix plug

This is a plug for Nilfisk Attix shop vacs in situations where you want to transport the shop vac without the hose plugged in. To avoid dust escaping the gaping hole, use this plug. Mine is used on a Nilfisk Alto Attix 360 - 21 and is…

Downloads: 32
Likes: 3
Rating: 0

Order a print of this model

PrintablesVilhelm P

Nilfisk Camlock (50mm) Adaptor

This part is combined with this camlock connector . I have printed mine in PLA and seems plenty strong for now. No big mystery regarding printing options. I used 3 perimeters, 0,15 layer height and 20% gyroid infill. I could se a future…

Downloads: 31
Likes: 3
Rating: 0

Order a print of this model

Printablesigeee

Nilfisk Multi II 30T Rohrhalterung/ hose holder

Rohrhalterung für den Nilfisk Multi II 30T. Der sollte auch kompatibel mit einigen anderen Nilfisk Saugern sein mit 35er Rohrdurchmesser. Für die Rohrhalterung zu verschrauben wird ein Gewindeeinsatz zum einschmelzen und eine M3X10…

Downloads: 30
Likes: 2
Rating: 0

Order a print of this model

PrintablesMartin

Nilfisk Coupe Special Hose Handle Clip

Print it -→ Clip in on -→ vacuum your home to show printer invest was worth it and wife is happy

Downloads: 27
Likes: 2
Rating: 0

Order a print of this model

PrintablesL7899

Nilfisk 107402774 tube holder

Nilfisk Multi II 30 T INOX VSC tube holder for aluminium 35mm tube. Tried finding this is shops to purchase, but was not available in my country.

Downloads: 26
Likes: 6
Rating: 0

Order a print of this model

PrintablesJordam Westerink

Nilfisk Elite Series - Tube Parking Clip (Repl. 128350157)

Replacement Parking Clip for Nilfisk Elite Series (Repl. 128350157) This is a replacement "parking clip" (tube holder) for Nilfisk Elite vacuum cleaners. The original part is known to be fragile and often breaks after prolonged use.…

Downloads: 25
Likes: 2
Rating: 0

Order a print of this model

PrintablesMixi

Nilfisk vacuum cleaner suction regulator

Should be printed in vertical position, so the locks do not break. Supports are needed mostly to create large enough contact layer. OpenSCAD source included, I'm sorry for sparse comments and short variable names, but I'm too lazy right…

Downloads: 23
Likes: 1
Rating: 0

Order a print of this model

PrintablesJan Stanka

Nilfisk Aero hose holder

Hose (or cable) holder for Nilfisk Aero 31-21 vacuum cleaner (may be for similar from this range) - spare part. Print Settings Printer: BIQU BX Rafts: No **Supports:** Yes Resolution: 0.2 **Infill:** 50 Filament: Fiberlogy Nylon black…

Downloads: 22
Likes: 3
Rating: 0

Order a print of this model

PrintablesBent Derailleur

Makita sander Nilfisk adapter

Adapter to fit your vacuum cleaner to your sander. It is slightly conical but dimensions in the middle are about 22.5 inner and 25.5 outer, diameter in mm. Print in TPU. If you like my work, consider buying me a coffee:…

Downloads: 21
Likes: 10
Rating: 0

Order a print of this model

Printables3DPrintDemon

Nilfisk Multi II 30T Vacuum Clip Guards

…Please be sure to hit like & post a make, I'd love to see your prints! Stop clips from accidentally opening when snagged while carrying the vacuum. Print standing up on bottom surface, mine were printed in PLA+ with a 0.6mm nozzle &…

Downloads: 21
Likes: 6
Rating: 0

Order a print of this model

PrintablesOlaznog_sp

Nilfisk Power Vacuum Hose Adapter / Connector

Nilfisk Power Vacuum Hose Adapter / Connector The plastic tabs on my original Nilfisk Power P10 vacuum tube connector eventually snapped off, causing the hose to disconnect with even the slightest pull. Since the manufacturer doesn't sell…

Downloads: 20
Likes: 1
Rating: 5

Order a print of this model

PrintablesReseke Inovation

Nilfisk One Dust Bag Holder

This is a replacement part for the Nilfisk One dust bag holder. It comes in to versions: Nilfisk_One: A complet part, that can be printet in one go. Nilfisk_One_Parts: The model have been split in too and need glue to combine them.

Downloads: 18
Likes: 1
Rating: 0

Order a print of this model

PrintablesLittleHobbyShop

Nilfisk Nozzle Adaptor

This a part designed to fit the Nilfisk rubber vacuum nozzle pictured (printed with part number 107401562). The rubber nozzle fits inside this part. It may be compatible with other vacuum nozzles, the port opening is 36mm across with a…

Downloads: 18
Likes: 3
Rating: 0

Order a print of this model

PrintablesPreRas

Vacuum holder cone for Nilfisk Buddy II 12

The adapter broke on my vacuum, so “unfortunately” I had to print one myself. Available at Onshape for you own modification: https://cad.onshape.com/documents/6b92f108b729211ad097d3e7/w/8c30fd4005eba666e55889fc/e/6ab03e459e514698aaa2a8bd

Downloads: 17
Likes: 1
Rating: 0

Order a print of this model

PrintablesMatěj Slíva

Replacement bottle for Nilfisk Super Foamsprayer

🇬🇧 English: This is a custom-designed replacement container for the Nilfisk Super Foamsprayer. It features a compatible thread for the adjustable foam head. Ideal if your original bottle is cracked or if you want to have multiple bottles…

Downloads: 17
Likes: 1
Rating: 0

Order a print of this model

Printableseloekset

Nilfisk vacuum cleaner attachment

The extension wand has become looser over the years, so I made an adapter between the extension wand and the handle to make a tighter fit. Printed with ABS 3 perimeters, 50% infill, 10mm brim width and support everywhere

Downloads: 16
Likes: 0
Rating: 0

Order a print of this model

PrintablesTotally Feral

Nilfisk aero 26 to dewalt DCW210 Sander

Ideal for the Nilfisk Aero 26 and the Dewalt dcw210 Sander it has gotten me out of a pinch a couple of times I have other versions in the making which I will post when complete please bare with me I am extremely new to cad and self taught…

Downloads: 16
Likes: 9
Rating: 0

Order a print of this model

PrintablesDengamleninja

Nilfisk VP930 HEPA Adaptors

COMMERCIAL LICENSE ACCESS is available through a patreon membership where you help support me and get commercial license which applies to all my models except remixes i made from others work. https://www.patreon.com/Dengamleninja

Downloads: 15
Likes: 0
Rating: 0

Order a print of this model

PrintablesVitek T

Nilfisk - air filter holder / Drzak filtru

Air filter holder with thread. ----------------------------- Drzak filtru se zavitem.

Downloads: 14
Likes: 1
Rating: 0

Order a print of this model

PrintablesCarsten Sørensen

Nilfisk Buddy II adapter to Toolson

An adapter to connect Toolson giraffe sander hose directly into the Nilfisk Buddy II vacumcleaner. A nice tight fit, so you don't need to connect the two hoses, if you don't have a converter. It's made to stick out, for easy removal and…

Downloads: 14
Likes: 2
Rating: 0

Order a print of this model

Printablesyogi

Thread Protector Pressure Washer - Gewindeschutz M22 Hochdruckreiniger (Kränzle, Kärcher, Nilfisk)

I have slightly modified the thread so that it can be easily screwed onto high-pressure lances. It protects the thread when the lance is not in use. Thread type: M22 × 1.5 mm ******* Ich habe das Gewinde etwas angepasst, damit es gut auf…

Downloads: 14
Likes: 3
Rating: 0

Order a print of this model

PrintablesMichael Jones

Vacuum Cleaner Power Tool Adapter (Nilfisk x Ryobi)

Adapter designed to fit a nilfisk bravo vacuum cleaner to my tools. This works for both a ryobi orbital sander and a black and decker jigsaw.

Downloads: 13
Likes: 1
Rating: 0

Order a print of this model

PrintablesoschultzHH

Adapter C35 to Nilfisk

Print with 4 layers. Needs supports (all). First proof of concept with PLAr is working fine. So PETg(r) will follow. Just an example that the Prusaslicer is good enough to bypass CAD-Programms;-) With a little bit more further work it may…

Downloads: 12
Likes: 0
Rating: 0

Order a print of this model

PrintablesAntimaterie

Makita/Nilfisk shopvac 63mm hose adapter

This an adapter to a 63mm air hose to a makita shopvac. It will work definitely with models: VC2000L VC2013L VC2512L, VC4210 and possible VC30xx series. Also works with Nilfisk ATTIX 33 and 44 as well as many other brands Print…

Downloads: 10
Likes: 2
Rating: 0

Order a print of this model

PrintablesJakob

NILFISK Handrohr 36mm Ersatz Verbindungsstück

Mir ist das oroginal Verbindungsstück gebrochen. System 36/32

Downloads: 8
Likes: 3
Rating: 0

Order a print of this model

PrintablesMakebruksting

Nilfisk reinforcement clamp

Nilfisk reinforcement clamp The “handle pipe” on my Nilfisk Aero 26 had small cracks in it that caused the hose to coupler to come loose. This clamp holds it together. I used a m3x16 screw to fasten it. If you need a new hose coupler,…

Downloads: 6
Likes: 1
Rating: 0

Order a print of this model

PrintablesScheer85

Nilfisk to DN40

Dies ist ein Adapter für den Nilfisk Alto Aero 21 INOX auf ein DN40 Lehrrohr. Gedruckt mit 0.4er Nozzle, 0,2 layer, ohne Supports in PETG. -------- This is an adapter for the Nilfisk Alto Aero 21 INOX to a DN40 pipe. Printed with a 0.4mm…

Downloads: 6
Likes: 1
Rating: 0

Order a print of this model

PrintablesNextGenHen

Nilfisk Adapter for Cyclone Vacuum Dust Separator

Adapter to be able to fit a Nilfisk vacuum (34mm outer diameter) directly into the Cyclone Vacuum Dust Separator.

Downloads: 6
Likes: 1
Rating: 0

Order a print of this model

Printablesguyjami

Guide rail for Nilfisk GM 200/300/400 vacuum cleaner bag with dust control Ref: 21907600

You'll find french explanations on my website : https://labidulerie.vicou.be/guide-sac-nilfisk-gm200-300-400/ I had lost the original part and it is no longer available on the market. It is inserted obliquely and clips from below. It is…

Downloads: 6
Likes: 3
Rating: 0

Order a print of this model

PrintablesHarpalyke

Makita 5M 28mm hose to Nilfisk Aero connector

This adapter allows the use of the Makita 195436-7 hose for the VC013GL with a Nilfisk Aero vacuum.

Downloads: 5
Likes: 3
Rating: 0

Order a print of this model

PrintablesSimpsonB3D

Lupe adaper for Nilfisk 33.5mm Int. Diam pipes

Printed with eSun PETG upright at 0.16mm layers and 4 perimeters. Solid enough. Original adpated in Prusaslicer using modifiers. Other slicers may not work.

Downloads: 4
Likes: 2
Rating: 0

Order a print of this model

PrintablesMartijnD

Nilfisk One vacuumcleaner tool holder

Recently bought a Nilfisk One vacuum cleaner. This came with 4 attachements. 2 of them are neatly stored inside the vacuum cleaner which is really convenient. But the other 2 just kept laying around the house. So i created a holder for…

Downloads: 3
Likes: 0
Rating: 0

Order a print of this model

PrintablesWetdesign

Nilfisk pressure washer - outlet release accessory

Pressure washer nut was stuck and I could not open it with large pliers without damage. Pliers distort the nut. This part fits on top of the Nilfisk nuts with matching 15 grooves and a hexagonal nut for your large wrench. I printed it…

Downloads: 2
Likes: 0
Rating: 0

Order a print of this model

PrintablesNickbalis

Nilfisk Lance Holder 128500104 / Pressure washer gun holder

Mine broke so I designed a new one. I attached the sldprt in case you need to make changes. I printed with PETG 4 walls and 15% infill. In the picture it looks a lot larger, I've changed it to be a bit smaller.

Downloads: 0
Likes: 1
Rating: 0

Order a print of this model

Printableslomamba

Nilfisk E 145.4 attatchments

1 organiser for spray gun + nozzels. 1 holder for spraygun. Screws or metal mount not included, i bought those at my local hardwarestore,

Downloads: 0
Likes: 0
Rating: 0

Order a print of this model

Printables