1 / 8
Nilfisk Multi II 30T Vacuum Clip Guards
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stops you snagging & opening the clips when carrying the vacuum
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 22
- Makes
- 0
- Views
- 410
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
…Please be sure to hit like & post a make, I'd love to see your prints!
Stop clips from accidentally opening when snagged while carrying the vacuum.
Print standing up on bottom surface, mine were printed in PLA+ with a 0.6mm nozzle & 0.4mm layer height, 15% gyroid infill.
Attach to the drum of the vacuum with rubberised contact adhesive, align the circular cutout at the front evenly, clamp the clips closed & position the guards to suit. Hold in place with masking tape until glue has set.