Counting matching models…
After having a bunch of problems tunning the stringing problems on my GeeeTech A30T, I found out that seems to be a common problem with the printer in question. After seeing a bunch of solutions relying on lowering the extruders from the…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
This new model is actually something I did mainly for myself, but of course I wanted to share it with all of you ☺ On June 4th I turned 30yo and officially entered a year and a period of life where you, let's say it, officially become an…
The retro connection was inspired by the first PlayStation and presented as part of the PlayStation 5 collector's box in honor of its 30th anniversary. I wasn't able to purchase a device but at least I have this fun cable. I created two…
Medal to Celebrate turning 30 that I made for some friends Print flat, no supports or plate adhesion needed
I tend to give a home to abandoned thinkpads with missing parts. I remixed my X200 HDD cover to fit a X230 I recently got. Printed without supports, 0.1mm layer. Fits like the original after a little bit of cleanup. Print Settings Printer…
Basado en el diseño original del conector de la PS5 30th aniversario. Recomendable imprimirlo en impresora de resina.
Approximately 5" wide and 3" tall (excluding the ~3.5" tall legs)
Gear for any universal 3mm shaft, this is lock tight version so its will permanantly attached make sure to use glue or locktite Onl y print with resin 3D PRINTING SETTINGS Standard type resin only, not suitable for water washable…
MINIDISC - 30TH - including a built-in stand. Printing without supports. PLA
A modular 1:30 scale 3D RC crawler course tile featuring a multi-level off-road terrain layout with realistic rock formations, logs, ledges, and crawl paths designed for technical driving lines. The terrain includes textured stone…
3D version of Sega's logo design for Sonic hitting 30 this year! This colour print can be done without use of an MMU and can be done manually with a filament change at the appropriate layer when slicing in PrusaSlicer - for more info see…
A few years ago, your Voron 2.4 3D printer was considered fast. However, after four years of technological advancements, newer printers on the market now print much faster than yours. Should you buy a new 3D printer? Upgrade to AWD? That…
All of the course sections were developed for my 1/30th scale Axial SCX30 Chevrolet K10 pickup but they are probably suitable for other 1/30th scale crawlers. This video shows the course being driven. Everything was designed using Fusion…
It's a Ribbon Holder Replacement for Zebra GK420t/GX420t/GX430t Thermal Transfer Printers. I printed with 100% infill.
A few years ago, your Voron 2.4 3D printer was considered fast. However, after four years of technological advancements, newer printers on the market now print much faster than yours. Should you buy a new 3D printer? Upgrade to AWD? That…
Sprockets compatible with Lego. Pitch is 12mm and most work well, but 4T and 5T is maybe a bit too small. Print with support. I used auto support. If you want a custom lego piece. Send me a message, and I'll see what I can do UPDATE…
Printed Rubber Feet for the Battewry Side of a Lenovo Thinkpad x230t There are two Models Provided. The one on the Laptop is slightly Smaller then the two on the Battery. Printed with Extrudr Flex (TPU) 100% infill no Supports.
ZWO EAF (Electronic Automatic Focuser) is popular among astro-photographers, becasue it works fine and is relatively inexpensive. However, once it is attached to the focuser-axis after removing the turning knob of focusers, one looses the…
Purge bushing for A30T. I used different files but didn't want to unscrew the bolts on the Z-axis, so I matched the X-axis motor cover with a 10mm limit switch offset and a basket. I changed the nozzle to stainless, but it is longer than…
I made this for the Disney Paris 30th anniversary event. It's a top hat with the 30th anniversary logo on it. If you put a light in it the logo becomes visible. In the V2 file there are holes so you can attach it to a headband.
I needed a way to transport and store my 7th and 8th battery for my thermal drone. The case for the drone only hold 6. This is printed in PLA. As I found out today, PLA shrinks when its -3F and a wind chill of -28. I would highly…
This model is a planetary gear system designed for learning and experimentation. It demonstrates the mechanics of an epicyclic gear train with the following parameters: Sun gear: 12 teeth Planet gears: 9 teeth each Ring gear: 30 teeth…
0.8 MOD gear 22T, 30T, 40T & 60T (for stepper motors fitted with hex shaft coupling connectors). I apply these gear wheels for focuser & rotator control of telescopes via ONSTEP ASCOM driver. One M4 flat-head (8mm in length) screw is…
I took inspiration on this model https://makerworld.com/en/models/716811#profileId-647639 which is actually a very good one! go check it out! Happy printing!
Based on the v1 https://makerworld.com/en/models/891717#profileId-848379 but added Playstation icons on the side and some waves in the back Happy printing!
Platen roller bearings/clips for the Zebra GK420T, GX420T, GK430T, and GX430T. I've personally designed and tested these with my GX430T. Intended to replace the OEM ones from Zebra, designed with ease-of-print in mind without supports.…
3D printed chainguard laminated with epoxy and carbon fiber
PET-G, 4 perimeters or whatever you see fit...
This is a remixed model from the original 16 years Birthday medal, for a friend that wanted to gift it to a relative in his 30th Birthday :) The 3cm wide bracket was nicely used to fit a fabric ribbon through the medal The 3MF is also…
Topper decorativo para pastel con el texto “Happy Birthday 30th” , ideal para celebrar un 30º cumpleaños de forma elegante y especial. Diseño moderno, limpio y fácil de imprimir , adecuado para cualquier nivel de experiencia en impresión…
Rohrhalterung für den Nilfisk Multi II 30T. Der sollte auch kompatibel mit einigen anderen Nilfisk Saugern sein mit 35er Rohrdurchmesser. Für die Rohrhalterung zu verschrauben wird ein Gewindeeinsatz zum einschmelzen und eine M3X10…
This is a reproduction of the top bezel of the IBM ThinkPad 730T Tablet computer. You can find more information in my restoration video below:
Brazaletes PS 30º Aniversario. Imprimir en TPU, activar "Imprimir paredes finas" en Cura, no necesita soportes. (testeado). PS 30th Anniversary Bracelets. Print in TPU, activate "Print thin walls" in Cura, does not need supports.…
This is a reproduction model of a battery enclosure for the IBM ThinkPad 730T tablet computer. The inside is designed to accommodate 6 AAA-size NiMH cells and 3 terminals. If you'd like to see how I made the terminals, please watch the…
Since the official release of the new anniversary set is right around the corner, I decided to create a new version of my Pikachu stand with the number 30 embedded into the cheeks. Ideally this model is printed with a 0.08 layer height…
…Please be sure to hit like & post a make, I'd love to see your prints! Stop clips from accidentally opening when snagged while carrying the vacuum. Print standing up on bottom surface, mine were printed in PLA+ with a 0.6mm nozzle &…
This is a reproduction of the PCMCIA door cover for the IBM ThinkPad 730T tablet computer. For video of the full restoration, please see below:
This is a reproduction of the original pen holder for the IBM ThinkPad 730T Tablet computer as well as a custom version. 730T_door_pen - this is the original model that has a lever to help eject the pen. This can be difficult to print so…
I modified the cover to accept two different types of USB-C chargers to make my ThinkPad tablet PC more versatile. I have also made a label for it as a .PDF on an A4 Page. Quick Info: This will only work or only make sense if you're not…
Carriage adapter for the Geetech A30T stock carriage. Allows use of the BTT 3in1out hotend as well as has the connectors to allow for use with the minimus cooling system. Small amount of cable management I mostly utilize for bowden tube…
I think something simmerler to the old hub motor I have can still be found on aliexpress: Promotion 36v 350w Front Eletrica Bike Kit Dgw07 Pedelec Hub Motor For Diy Electric Wheel. the motor uses 30tooth gears, not the more common…
This is a fix/replacement part for the Breville BEC430TTN Nespresso Pixie Water Reservoir not outputting any water due to the water reservoir plunger not being depressed properly from the base of the machine. This part is placed in the…
I’ve made a Pokemon 30th Celebration Design coin from the Pokemon TCG Pocket app. I’ve included a whole bunch of info if you want to print it as accurately as possible to how it looks in the app, but at the end of the day, you can…
The robots were really hard to get out of the vaccu-form, so i figured I needed to make something that worked and fit my sensibilities. We also have a few house rules (which needed dice for each robot) and I wanted the Archive token,…
PROSCENIC 830T Water tank cap
An XL timing pulley pair, 30 and 45 teeth on 8 mm bores, printed and run on a 150XL belt. Two M5 set screws per hub thread straight into hex-shaped holes in the plastic, with no nut or insert; the 45-tooth pulley has five spokes, and both…
230th Sustainment Brigade Tennessee National Guard shoulder patch. Usable as a pin with an appropriate backing. STL is for a 1 inch tall print. 2mm thick. load and separate into parts to color. Resize X and Y to your liking. Arachne wall…
A GT2 timing pulley pair, 30 and 45 teeth on 5 mm bores, printed and run on a GT2 belt. The 45-tooth pulley is cut down to three spokes on a 1 mm web, both print their flanges in place on breakaway supports, and two M3 set screws per hub…
1 inch model of the 30th Armored Brigade Tennessee guard patch. Included is a color reference from Wikipedia. Load into slicer and separate into parts, then change the parts to the proper colors. If you have only 4 colors available, use…
This piece of cutting edge technology will allow you to remove the VGA port nuts holding the motherboard in place. I hope this finds you when you need it most. While working on my x230t i had problems grabbing onto the nuts as i didnt…
This is a remixed model from the original 16 years Birthday medal, for a friend that wanted to gift it to a relative in his 30th Birthday :) The 3cm wide bracket was nicely used to fit a fabric ribbon through the medal The 3MF is also…
The robots were really hard to get out of the vaccu-form, so i figured I needed to make something that worked and fit my sensibilities. We also have a few house rules (which needed dice for each robot) and I wanted the Archive token,…
A modular 1:30 scale 3D RC crawler course tile featuring a multi-level off-road terrain layout with realistic rock formations, logs, ledges, and crawl paths designed for technical driving lines. The terrain includes textured stone…
All of the course sections were developed for my 1/30th scale Axial SCX30 Chevrolet K10 pickup but they are probably suitable for other 1/30th scale crawlers. This video shows the course being driven. Everything was designed using Fusion…
Platen roller bearings/clips for the Zebra GK420T, GX420T, GK430T, and GX430T. I've personally designed and tested these with my GX430T. Intended to replace the OEM ones from Zebra, designed with ease-of-print in mind without supports.…
Gear for any universal 3mm shaft, this is lock tight version so its will permanantly attached make sure to use glue or locktite Onl y print with resin 3D PRINTING SETTINGS Standard type resin only, not suitable for water washable…
Description: This is a custom-designed support mount specifically for the YDM-30T-4A electric motor from bread machine. The mount ensures a secure fit and optimal positioning for your motor, making it ideal for DIY projects, robotics, or…
![Anxiety (Inside Out 2 Fanart) 30th Birthday [Single Piece]](https://media.printables.com/media/prints/923696/images/7048697_f29466be-e8e8-4e95-b9c1-9f1705b3b0eb_79c3a1b7-a29b-4f0e-8d6e-f72ae2ee29fc/anxiety-inside-out-2-30th-birthday-fanart_render.jpg)
