1 / 9
Nilfisk Pressure washer water intake filter adaptor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Water intake filter for a Nilfisk C 120.6 or C 135.7 pressure washer. (Or similar)
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 62
- Makes
- 0
- Views
- 298
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This filter adaptor is for the low pressure side of the Nilfisk pressure washer.
It's a part that might break if someone add a force at the water intake connector. If broken, the machine is useless, while this filter adaptor is not available as a spare part!
It has been reverse engineered by me and you can now 3D print it.
Instructions:
Material: PETG, ABS or ASA for high strength.
Nozzle size: 0.4mm
Layer height: 0.1mm for the thread part, else 0.2 or 0.25mm
Infill: 25-35%
Wall loops: 3
Top / bottom layers: 3
Support: not required.