1 / 2
Prusa fixer for the spool filament on the holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fixing the spool on the holder so that it cannot move and the filament does not fall off the spool.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 47
- Wydruki
- 2
- Wyświetlenia
- 284
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (29)Powiązane
Sometimes it happened to me that during printing the spool with the filament moved from the centre of the holder and then the filament fell off the spool and got stuck. Therefore, I made a lock to fix the spool on the holder so that it could not move.
You need to use a lot of force to snap the lock on :-). But then the lock holds very well and there is no need to take it off when changing the filament spool.
If the lock would interfere with the spool, you can use the _small or _tiny version.