116 modeli
Hi ! Fixing clip for the leveling wheel of the Elegoo Neptune 4 Pro 3D printer. It prevents the wheel from turning due to vibration. Over time, it also appears that the wheel is trying to turn even with the clamp. But this is a simple…
Spacer for stable TPU printing for the QiDi Q2. In the stock setup, there is a 2.6–2.7 mm gap between the front wall of the feeder housing and the drive gears, where soft TPU filament can sometimes slip out. With this spacer installed,…
This thing will prevent a stuff in your car's trunk from moving around. Should be printed of temperature resistant filament (at least PETG; I've used ASA), standing on the side with holes. You have to attach a velcro using a double-sided…
a small component can help you to fix the M3 nut on 1515 aluminum extrusion to avoid slipping down and making noise while printing due to vibration.
It can fix the broken clothes dryer wire. 2,3 and the tube is 14 mm
Print: lay horizontal for speed – print vertical for better quality | 0.2mm 10% infill no supports needed multicolour support, turn on arcane wall generator and split to parts
For when a NEMA-15 style plug is a bit loose, you print this out of any material and it sits in the outlet and adds friction which lets it hold in place. I had the problem of loose outlets on planes (that are also angled DOWN) so I made…
The Fixer Mein Versuch etwas als Anfänger im Fusion 360 zu konstruieren ich hoffe es gefällt
The Crossbar used to fix each end is too loose for my liking. Use M3 bolts and nuts to secure the crossbar to each cradle. Orientation Print as it is, no support is needed. BOM 4 x M3x12 4 x M3 Nuts (6 for each if intend to fix the wiper)
With thicker walls more robust, print with PETG and 3 or 4 perimeter. For 14mm tubes and 2,5mm wires. If it is to hard to insert the wire -heat the wire end up with a lighter and then push the hot wire into the plastic holder.
I needed some funnels for film processing. I couldn't find any vase mode funnels I liked (and that would print easily), so I designed my own. While I was at it, I added text to make sure I'd never confuse them and contaminate my…
If AMS has problem with new model of the prusament spool print this is reusable
small piece to fix your dremel tip to his gallows
Supports de fixation pour monter des rétroviseurs du modèle suivant : https://fr.aliexpress.com/item/1005006240911627.html?spm=a2g0o.order_list.order_list_main.41.5b315e5b4D4Zaq&gatewayAdapt=glo2fra Si j'ai choisi ce modèle, c'est parce…
Tesla Model 3s made from 2017-2020 have an issue with the cables running from the main body to the trunk lid. They used solid-core wire which likes to break when its bent/folded repeatedly. Tesla is currently not offering to replace the…
Just stick it to the quickclick and you're good to go. Printed in extrudr PETG with one layer grey for the logo. No Supports needed. Edit 07.08.2023: added a step- and stl-file without a logo
Jednoduchý model pro opravení náklonu stolků v přednáškových učebnách 256, 309.
Do you love Jessie PLA? Damn right you do! It's a miracle of modern filament production! It only had one problem... The filament spools kept poking holes in my vacuum bags... Well, not anymore! Tired of getting holes in your vacuum bags?…
This is the wire retainer for Diatone Roma F5 FPV Quadcopter. This holds the 12Ga battery leads to the aluminum standoff. This may fit other Diatone FPV Quads. Leave a commit if anyone needs the 14Ga version.…
I love the Asssaver from 3DBen, but with a full-suspension bike and a dropper post, i trashed two of those puppies while jumping with the dropper post set down. It wobbled a little too much and one time it just snapped, the second time it…
(Work In Progress Still Trying to Find The Most Universal Shape) Step One: Put One Side Of String Through Hole On Tool Step Two: Shove The Tool Into One Of The Hoodie String Holes All The Way Step Three: Scrunch The Hood As Much As…
Made to get some more life out of my dying flip flops. May not work for all but feel free to take my design and modify it for your own use. I've included the solidworks file if you'd like to do so, or you can just draw it up yourself in…
Fat Fixer 15mm diameter button hole extender. Adds a little to the waist band of your trousers. Can be warmed with a hair dryer to add a slight curve to fit the body shape. Print settings: >30% infill support's required 0.2mm layer Hight
For users who got the BenQ EW3280U monitor, and, a Chinese Wisecoco 14 Inch 3840x1100 4K monitor, this Fixer is the must-have, definitely. This monitor leg with VESA mount can mount the Chinese Wisecoco 14 Inch 3840x1100 4K monitor (only…
Bought a cheap Ukulele that doesn't sound in tune after tuning it? There are lots of reasons that could happen, but this replacement nut will fix one of the reasons. Intonation is the accuracy of the pitch of the instrument, by the way.…
No supports required. Any layer height (0.1 mm preferred). The insert nuts I used were 18mm tall, so I used M6*30mm screws. Use different screw length if needed.
Cavalier pour fixer un câble de 12mm de diamètre Ce cavalier a été conçu pour remplacer la fixation standard a clou par une vis a bois Dans le fichier Fusion 360, vous trouverez un tableau de configuration, qui vous permettra de modifier…
Keep the curler in one place, so takes less space
Ever glare at an octagon light box wired by an electrician who clearly didn’t get the memo on your shiny new UniFi U7-Lite Access Point? I feel you. Their wiring wizardry left you with a mounting mismatch, the U7-Lite’s layout mocking…
CR10 / Ender3 Hotend Cable Mount / Fixer Only need one Ziptie for Fixing Cable on Model
i made this myself for my own pool cover
I have these amazing thrustmaster TPR rudder pedals, but I play VR in my couch instead of having a dedicated chair. So this beauty sits in the floor and all that keeps them from going away are the rubber feet. But looks like the rubber…
Lo cierto es que esta pieza es una autentica chorrada, pero para mi ha sido como pasar de la noche al día. Al colocarla en los brazos de la delta mini kossel elimina al 100% la pequeña "holgura" que queda en el cabezal. Junto con unas…
the tabs broke off my NutriBullet cups, so it wouldnt activate the motor any longer. This slides over the cups to engage the motors, allowing continued use. Print 80% or more infill for max strength.
Repair your broken A6398800985 by glueing this part onto the breakage. It will work with just superglue. But for extra strength, drill 1.5/1.75mm holes through the lashes and stick some filament through the lashes. Apply more superglue or…
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl this is a preliminary description (i will update the pictures as soon as…
A little device that can help you quickly pull a drawstring back through the hem of your clothing. Better than others because you can print in one piece, no glueing required.
I was tired of pulling out a brand new toilet paper roll only to find the center spool was smashed and would not roll smoothly. I designed this model to go inside the toilet spool so that it would spin freely on the toilet paper holder. I…
Print in TPU so it adapts to almost any filament roll.
Designed this tool mitigate some of the dents and rim damage on a used 14.5" lava lamp I received. How to use: Print the tool Remove bulb Insert tool into base Hold the top portion of the lamp base and gently tap the tool in (i used a…
Forma simples de fixar o encoder com raio de bike ou qualquer outra coisa parecida no motor de hoverboard, arquivo 3mf pronto pra ser modificado no fatiador de forma simples e facil, só ajustar os tamanhos de acordo com sua preferencia.…
A plastic clutch-fixer that holds a gas cylinder in a burner. Model fastening a gas burner on a zangi cylinder.
Early kits went out with some slight differences from the current model. These parts help solve some issues that some early BETA users uncovered during field trials. Reach out to [email protected] for information on if you need…
A common issue with the Qidi Box when using cardboard spools is that, during filament retraction, the spool exerts more pull than the feeder supplies. This causes the spool to bounce around and jam. Replacing the rubberized drive roller…
use this to take the divots out on the green
Support iPhone a fixer sous une tablette Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0,28 Infill: 20 Filament: Geeetech PLA Green Category: Mobile Phone
I own a telescopic drying rack that has its "strings" failing (detaching from the frame and falling) after several years of usage. This kit fixes the strings to the frame with common 3.6mm zipties
I noticed some layer shifting on my Up Box 3D printer a while ago. After inspection I saw one of the plastic parts that hold the back metal bar and bearings (X axis) was broken. Luckily I have more 3D printers so I designed a model in…
Gamelle pour chat à visser sur un support. Après une opération, mon jeune chat n'arrivait plus à manger dans la gamelle avec sa collerette. Je lui ai dessiné une petite gamelle à visser sur un morceau de bois. Convient aussi aux chats…
This is a simple 3D-printed add-on designed to lock the metal paper alignment guide on the ACCO Mutual 450 3-hole punch in the perfect position for A4 paper. On vintage models, the guide is adjustable for sizes like letter and legal, but…
Remix of the LMSR V2 200mm Part 2 Added small holes for both ends of the filament to be fixed. Unfortunately Fusion 360 wasn't really cooperating very much at times so I had to greatly reduce the triangle count of the original STL, so…
I have had a lot of trouble with the terrible filament holder on my SV08 - for some reason it has a very small diameter so typical filament spools will flop around and can get tangled - this fixes it pretty simply This is an adapter to…
I only wanted to use FlickerFixer PCB from Cybervision 64/3D so I needed to make bracket for it. Bracket was made with some openscad PCI bracket project, then I modelled some support structures on it with freecad to make it more sturdy.
Created a small extender for the inner pegs of the trashcan so that it doesn't fall off -- I hear there are a ton of issues with the lids of this model. Attach 1 1mm to both sides or 1 2mm to one side to fix :) Might need two! Printed in…
My dimmer nobs have very flimsy plastic sticks which are squeezed around a plastic stick which controls lights. Several times the thin sticks break (if you tilt the nob by using it a bit more forcefully). The solution is to print small…
This is a simple enclosure for the Bitfixer PETdisk v1 (a SD card floppy emulator for the Commodore PET series). I've never been able to find one online, so I made this on TinkerCAD (my first build). Don't expect much, it is just a simple…
If the screw-holes in the door became too big to fit any screw this is a practical solution. There are two versions: half opliggend (= partial) and opliggend (full overlay). The last one is somewhat narrower. Measure your hinge and the…
PopSockets are great, but the standard air-con vent mount for a popsocket-ed phone has a few problems. The weight of the phone and bumps will cause the vent to move up and down as well as rotate if your PopSocket is not located at the…
As you can see in the pictures, my AC is making quite a bit of a mess on my wall by spewing water all over it, the technician said it couldn't be fixed, so I built this contraption to capture the water that comes in, even sometimes when…
I have a Gorenje slicer—one of the more budget-friendly models with a plastic housing. It features a foldable slicing table to save space. This folding mechanism relies on small plastic pins or tabs that rotate when the table is folded…
A friend needed replacement clips for her fence band so I created them. Works great for her. FreeCAD file included if you need to make adjustments.
This is an angle lock / position retaining insert for Topeak UTF mounts. I really like this compact mount, but my setup (bike computer + headlight) turned out to be too heavy. The stock bolts couldn't hold the tilt angle under load,…
I tried to use usb cable fixer on printables / thingiverse, but I could not make the cable through the hole.
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl this is a preliminary description (i will update the pictures as soon as…
I have a Gorenje slicer—one of the more budget-friendly models with a plastic housing. It features a foldable slicing table to save space. This folding mechanism relies on small plastic pins or tabs that rotate when the table is folded…
This lilltle thing helps you to hold your cables in position. Made for use with 10 mm velcrostrips and other zipties. Category: Other
I have had a lot of trouble with the terrible filament holder on my SV08 - for some reason it has a very small diameter so typical filament spools will flop around and can get tangled - this fixes it pretty simply This is an adapter to…
I love the Asssaver from 3DBen, but with a full-suspension bike and a dropper post, i trashed two of those puppies while jumping with the dropper post set down. It wobbled a little too much and one time it just snapped, the second time it…
I own a telescopic drying rack that has its "strings" failing (detaching from the frame and falling) after several years of usage. This kit fixes the strings to the frame with common 3.6mm zipties
Sometimes it happened to me that during printing the spool with the filament moved from the centre of the holder and then the filament fell off the spool and got stuck. Therefore, I made a lock to fix the spool on the holder so that it…
My AC leaks condensation into the house, so I designed something to catch the water droplets and stop that mess. It can be printed with little or no infill. I made a couple of designs, each one with a different side for the hose. (Oh, and…
A small desk plaque that brands you as the official “F*ck Up Fixer”. You've been doing the job anyways, or I bet you know someone who has been. Time to get the official title! Plaque printed fine without supports. Measures roughly 4in x…
This Golf Ball holder is to be used in conjunction with the clicgear v3.5 and up golf cart connectors on the side of the golf cart handles to provide additional storage for golf balls, divot fixer, tees, and a ball marker. The bottom ball…
The steam wand is often dripping on a Gaggia Classic espresso machine. Here is a solution to route the water to the drip tray. Made for my old Gaggia classic fitted with the Rancilio Silvia steam wand and a low driptray. Another version…
Simple end piece that fits my rack. It's a really small print you can resize it try to get a good fit on yours.
TPU Glass table fixer made it from TPU to sop vibrations and stop table sliding
Replacement Plastic Fixer for IKEA JOKKMOKK Chair I designed this replacement part for the IKEA JOKKMOKK chair after the original plastic fixer broke. I couldn't find an adequate model online that matched the exact dimensions of the…
The Wentronic 51722-GB 1 x HDMI wall mount socket is pretty good for it's price but it has flaw. There are two very small screws holding the actual HDMI socket in the inner plastic part. If you are mounting the socket in a recessed…
Small part to make the glue gun charge contact stronger by pushing the contact springs together further.
Designed to fix or strengthen a broken charger plug.Adapter fits onto the top of the charger and provides structural support, ensuring the plug remains functional despite any cracks or damage. It is a practical and cost-effective solution…
tabs broken off your AC button and now it just wiggles around in your dash? Not a problem, this little bracket will hold it tight for a nice clean OEM look. After you print the part, the hole gets tapped for a 4-40 or 4-48 set screw, then…
I tried to use usb cable fixer on printables / thingiverse, but I could not make the cable through the hole.
This is a front lights holder for Topeak's Fixer 8 accessory. It is printed as two parts, which can be glued together. Be sure to glue parts when they are uninstalled from Fixer 8, so both legs can be placed closer together (move inwards…
Minimal enclosure for the Adafruit USB Type C CC Resistor Fixer
This lilltle thing helps you to hold your cables in position. Made for use with 10 mm velcrostrips and other zipties. Category: Other
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/3abQVV2zwGX Print Settings Printer Brand: Monoprice Printer: Maker Select Rafts: No Supports: No Resolution: .2mm Infill: 20% Notes: Printed in ABS.…
Recommendation Material 1. 2 Short M2 Screws (5 - 8 mm long) 2. Some amount of Plastic 3. A 3D Printer 4. A broken caulk gun Printing > Material(Plastic) should have good property bounding in Z axis (e.g. PETG) > 2 Parts print (Click…
print anyway you want a good way to fix divots hope everyone likes
This is a simple I designed in OpenScad to fix a broken bed slat I had. Feel free to tweak the openscad if your bed slats should be a different size.
This simple clip-on helper for cloth masks of 19 cm width helps to close the gap around the sides of the nose. It may/may not fit your face; I shaped it to my face to improve the fit of cloth masks sold at our local supermarket. It keeps…
The notches on the sides of the Prusament spools allows for easy clipping of filament tips. But since I got an MMU adapter I found that sometimes these notches can cause snags of the filament. Failing a print hours into a complex print…
This will help to prevent cable damage close to the connector. It is just a quick fix for my cable but if it helps other people I can create more versions (different cable sizes and more tweaking), just leave comments. Print Settings…
