Cargo fixer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model prevents stuff in your car trunk from moving around.
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 276
- Wydruki
- 7
- Wyświetlenia
- 969
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This thing will prevent a stuff in your car's trunk from moving around.
Should be printed of temperature resistant filament (at least PETG; I've used ASA), standing on the side with holes.
You have to attach a velcro using a double-sided tape on the bottom side (without holes).
This model is highly inspired by the model from William, but I've redesigned it from scratch.
Note: The pictures do not correspondent to the model in files. The files contain second version of the model, with thinner part in the center, between the triangles.
EDIT 2023-12: I added an improved version with a handle (wings) in the center part, as I realized that detaching the fixer is quite hard without it. Unfortunately, I don't have any photos of this version, so please, upload your makes :) It should still be possible to print it without supports.