Arduino Tool box for the Sunfounder V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a toolbox to organise all the components for the SunFounder kit. I have included the R4 Uno mounting board and
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
I have updated some of the items, specifically the Arduino Assembly Board again, also strengthened the internal walls of the box and shelves and increased the thickness of the hinge walls.
I decided to make an electronic toolbox as a personal challenge. Just about any Uno will mount on the breadboard holder, I found that as I worked on projects the UNO would wonder around my desk with all the different length wires.
I used translucent PETG (PLA would also work) for the lid, TPU for the gasket and PETG for the balance of the project. I would suggest the bread board holder be PETG as the small upstand knobs have been replaces with holes for M3 inserts, this allows for the Uno to be screwed in place..