Liczymy pasujące modele…
Goal of the design: I got tired that my Arduino prototypes were so difficult to move, and that the jumpers were always being ripped out due to the board being separate from the breadboard. The goals for this design were; Easy attachment…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Why First, I must say that I really love Juggernaut Case products. I had a Galaxy S20 with their case and belt clip, but then I decided that I wanted a degoogled phone, so I went with the Pixel 6 option. But Juggernaut does not make cases…
Wydruk około 3,16 €–3,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The DrawBot is similar to the commercially available AxiDraw. It is powered by an Arduino Uno controller, uses a CNC Shield, and GRBL firmware. The approximate cost to build the DrawBot is $100. Recently some makers of the Drawing Robot…
A filament guide that replaces the spool holder and enables the attachment of a bowden coupler/connector and the filament runout sensor. You can use the original screws for the attachment. Use PETG, ASA or ABS if you plan to have your…
I needed an inline filament runout sensor that I could stick inline between Bowden tubes on either end, but I wanted it to be as small as possible and require very few parts. I also wanted to only have to print a single part, and I wanted…
Bambu's new TPU-For-AMS is a contentious material , primarily because the default profile is not good (which is often true, sadly). Annoyed that I got 4 rolls of this stuff that kept breaking along Z-layer lines, I set out to fix this. I…
Case for Arduino UNO, CNC Shield and 60x60 or 40x40 fan (grbl).
Pokemon Generation 5 Unova Gym Badges These were designed to be printed with different colors, pausing to swap colors out at a certain height. Where to pause depends on your layer height, but it should be easy to figure out in your…
Made an angled test bench for Ardunio Uno R3 for better desk use than all the last ones out there. I added a front V-slot to make slide on attachments for other test benches in the future. If you think of any changes let me know :)
FLSUN V400 Stock Runout Sensor Mount.
Take your Prusa CORE One to the next level with this unofficial, 3D-printed advanced filtration system , designed to enhance air purification performance while maintaining a clean, compact look. This version is inspired by the original…
All in one - Filament jam, cleaner and runout sensor Switches are adjustable "Micro Roller Lever Arm Open Close Limit Switch KW12-3 PCB Microswitc ZP" Specifications: Operating temperature: -40°C to 70°C Rated voltage: AC 125V-250V…
The first model in the "modular Arduino portable workstation" series, abbreviated as ARMORS. The distinctive features of the series are: modularity, easy assembly without the use of screws and glue, minimum tools, only a hammer,…
A Scale model of the NASA JUNO spacecraft. Recommended: 0.16mm Layer height Print Jerk Linear Advance More Info: https://www.jpl.nasa.gov/news/press_kits/juno/science The principal goal of NASA’s Juno mission is to understand the origin…
Like many people, I've relocated my spool holder from on top of the machine down to a lower level. This left the filament run-out sensor kind of stranded because it's attached to the stock spool holder upright. I looked quickly but didn't…
Mod of fan duck to fit sunon drives and use 8th driver in octopus.
This design is better than most commercial solutions as it uses a far more accurate test indicator (each hash mark is 0.0005") and easy to estimate down to 0.0001" vs dial indicators which are really only good to 0.001" and due to their…
This is a case for MeanWell LRS-150-12 and Quinled Dig Uno led controller with WLED software. FreeCAD ( RT ) file included.
Mini toy sci-fi lunar rover buggy. It features a lift up rear hatch with a small load cargo area, four working hubless wheels, and long travel independent suspension. Great for those looking for a non-franchised and non-weaponised space…
ReeFi Uno 2.0 Extruded Aluminum 1010 Mount
While installing an Infinity Flow S1 on my Ender 5 Max, I discovered that PFTE tubing must be present and secure for the entire filament path. My choices were to eliminate the runout sensor and run PFTE directly to the toolhead from the…
I hope you'll enjoy this project, it was a lot of fun to work on. I'm sure there ale stil a lot of possibilities to improve & change so fill free to change it. Components to buy: ARDUINO + CNC shield + A4988 + 4 nema17 motors - 1 8mm…
4 posts using clear PETG (or other clear material). .15mm layer height with brim. I printed on the textured sheet, no post processing other than removing the brim and some minor stringing. Hot glue to hold in place. I love the snug case,…
Required Hardware 1x M3 screw (6 mm length) 1x M2 screw (12 mm length) 1x 8 mm Bowden/PTFE adapter 1x Omron D2F microswitch 1x M3 heat-set insert (4.2 mm outer diameter in my version – adjust if needed) 6-7mm piece of Bowden tube
Arduino UNO 10" Rack Mount Bracket Panel 2U - Staffa installazione Arduino UNO rack da 10" Suitable for: https://www.printables.com/model/1150903-rack-server-rails-self-supporting-m6-m4-thread-col 06/02/2025 Update: added resized models…
Составной корпус Платы разработки Arduino (UNO R3 Atmega328p), состоящий из корпуса, крышки и крепления под рейку
This is a mount for the Arduino Uno for the Shapeoko2 intended for the right Y axis motor mount plate, as shown in Wiring Option 3 here: http://docs.shapeoko.com/wiring_3.html This design was based off of pieces from the following Things:…
El Arduino UNO-Box es una caja transparente diseñada para alojar un Arduino UNO. Su tapa es independiente y cuenta con espacios específicamente diseñados para las salidas de la placa , permitiendo el acceso a los pines, puertos y…
If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) Hello, here you have a tiny runoutsensor. this is the smallest i could get them. You need: 2x ECAS4 without rubber part 1x 6x3mm magnet 1x…
pokemon unown themed cherry mx caps
ReeFi Uno 2.0 Light Shade for reef tank light Best to print out of PETG for flexibility and durability.
Customizable Pokémon Unown Name Tag – Editable Fusion 360 File Bring your favorite Pokémon aesthetic to life with this fully editable name tag ! This model lets you write name or word using the iconic Pokémon Unown alphabet , adjust the…
My Trianglelab runout sensor needed a final attachment to my V0.1. I designed two parts, one is the replacement of the right rear foot. Second is the holder for the runout sensor. Foot part receives two heat inserts M3, to receive the two…
This is my filament sensor remix for these switches from Amazon . I also enlarged the filament hole to fit a length of 4mm PFTE tube, which should give a very smooth filament path, and it plugs nicely into my reverse Bowden mount . Just…
Sunoco logo for office \ workshop
Print with PETG and without supports. Use the gridfinity baseplate from Gridfinity baseplate with hook for a 10x10mm pegboard https://www.printables.com/model/486696-gridfinity-baseplate-with-hook-for-a-10x10mm-pegbo/comments
This is a development tray I modeled. While this is 100% modeled by myself I have to give credit to BV3D Bryan Vines and tonyrod on thingiverse for design Ideas. This is heavily influenced by Bryan Vines design from 2019. Bryan if you…
I made two versions of RMS compatible mounts for Reefi Uno 2.0 and 2.1 in both Front to Back and Left to Right versions. print two of each and use M3x10 or M3x12 with a washer to mount the lights. Also works on Nicrew Rail which is a copy…
Quinled Dig Uno case with cherry mx button on top and a DC jack Category: Other
This is an enclosure for optical sensor. It's made to mount on the creality runout sensor bracket. the creality sensor is just a switch and I had issues with the filament wearing down the switch roller. so made a contactless version. Did…
This is a compact custom filament sensor version of the legendary Sherpa Mini that includes several improvements. Please read the differences section compared to the original Sherpa Mini. This version uses nylon screws and nylon nuts at…
For my exhaust air heat pump, I have several external wall air diffusers, so-called ALDs, in the shutter box. I designed this component to improve the sound insulation here. A “first element” and several “middle elements” are required.…
Used the hinge and support designs from https://www.thingiverse.com/thing:1250943 as inspiration, with slight alterations. As for dimensions, some inspiration was taken from https://www.thingiverse.com/thing:2005920 .
Print as shown in the picture (layer 0.12), without supports inside. Build of Materials: Switch OMRON D2F-5 (use NO) - 1pcs. Connector jst 2p 1.27 - 1pcs. Steel ball 5mm - 1pcs. ECAS04 (remove the rubber part) - 1pcs. M2x12 - 2pcs.…
Case that fits an Arduino UNO with the CNC Shield V3 and a 60mm cooling fan. The top part just snaps in place and is easy to remove to get to the arduino underneath. The fan is mounted with two screws from the bottom.
Layer height: 0.12mm Outer shells: 3 Filling density: 15% Filling pattern: honeycomb Print speed: 40mm/s Travel speed: 70mm/s Extruder: 210°C Platform: 50°C No support needed.
Arduino UNO 10" Rack Mount Bracket Panel 2U - Staffa installazione Arduino UNO rack da 10" Suitable for: https://www.printables.com/model/1150903-rack-server-rails-self-supporting-m6-m4-thread-col 06/02/2025 Update: added resized models…
🛠 Materials & Hardware: Split Keyring Loops -> [ https://amzn.to/41RZ3zh ] Pieces Lobster Clasp Phone Charm Straps -> [ https://amzn.to/3P3RBOD ] PLA Combo Black & White -> [ https://amzn.to/4t0FgJ4 ] PLA OVERTURE Red -> […
Features: Fan Mount: Includes a dedicated mounting point for a 50x50mm cooling fan on top, ensuring efficient airflow to prevent overheating during prolonged use. Easy Access: Provides cutouts for all essential ports, connectors, and…
Replace your tiny lamp knob with this easy to turn paddle one! There are 2 models. One is threaded and the other is self tapping. The lampshade should be printed using PETG unless you are using a low power/heat LED bulb.
The body parts are attached to each other using bolts and nuts.
A 45 degree remix of the filament runout sensor bracket. Puts less strain on the filament path as it enters the printer.
Just adapted to use 5mm ball since I didn't have 5.5mm one
I was searching for cases for the Uno R4 WiFi, and was unable to locate any that met my expectations. Some were loose, some had weird printing artifacts, and none really felt polished enough for the job. I designed this to be form fitting…
I see the potential in this mod, so I recreated it because I wasn't able to open OpenSCAD as parametric.
Print with PETG and without supports. Use the gridfinity baseplate from Gridfinity baseplate with hook for a 10x10mm pegboard https://www.printables.com/model/486696-gridfinity-baseplate-with-hook-for-a-10x10mm-pegbo/comments
Credits: All credit goes to SilencedFrost , who has provided incredible add-ons for Neptune 4 printers. I just took this incredibel work and adapted it to my preferences. This custom mount integrates the optical filament runout sensor by…
This just a my replacement part i made uses a bolt and a 3D printed part part needed M6 bolt, 40mm minimum length https://www.ikea.com/sa/ar/assembly_instructions/rigga-clothes-rack-white__AA-712786-6-2.pdf
Les fichiers Stl sont fait avec une “plaque”. Elle sert a centrer les impressions les une au autres dans le slicer. Il faut juste la placer sous le plateau pour quelle ne soit pas imprimée. Il faudra jouer de la symétrie avec le jaune,…
The model from Alia5, just with glued Wissencat's Meowburner ears. The ears are much thinner than original Meowburner ears as they would conflict with the motor mount.
Remix to move the sensor to a higher position on the printer. Added cable tunnel with Print Bridges that can be removed after printing with a sharp knife. (see pic) Added Trimmable Print Supports on bracket angle that can be removed after…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Heart of Hope Juno Cosplay Backpack from Overwatch 2. The supports…
The opening of the original SV08 Sensor is wearing out very quickly, so i made a quick print, to guide the Filament through a short piece of PTFE Tube. Mount it with the stock screw. You need a PTFE Fitting (M6) and a short piece of PTFE…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com. You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Hola he creado un garaje para tu coleccion de hotwheels con una capacidad de 5 piezas y amplio espacio para agregar accesorios. El modelo puede ser impreso de diferentes formas,recomiendo imprimir con PETG para una mayor durabilidad o el…
Development base that houses an Arduino UNO/MEGA footprint board and a standard 400-point breadboard. The base has recessed cutouts for 12mm rubber feet for anti slip. For mounting the base utilizes (4) - M2x6 SHCS and (4) - M2x3x3 heat…
This is an enclosure for optical sensor. It's made to mount on the creality runout sensor bracket. the creality sensor is just a switch and I had issues with the filament wearing down the switch roller. so made a contactless version. Did…
Make descaling your automatic coffee machine easier with this simple model! Normally, you need to find just the right container to fit under the outlets and empty it multiple times during descaling. With this model, you can collect the…
This is a simple snap fit case i made for the Arduino Uno R4 in Onshape! It is modeled after the GrabCAD 3d model here https://grabcad.com/library/arduino-uno-r4-wifi-1 with .15 mm tolerances. Connectors have bigger tolerances because of…
Update 1 March 2026: Update to fix issue where if the filament is somewhat curved it would not fully press on the switch and triggering the sensor off.
I wanted to try something different and modeled a Wheatley Vodka stand with stirrer holder! I did use the Polymaker Matte PLA Filament Army Blue 1.75mm 1kg 3D Printing Filament, PolyTerra 3D Printer PLA Filament. The blue is almost dead…
Same as last time, but with improvements! Uses less filament and is designed better to let the sensor spin freely. I made this myself. Mount to attach the run out sensor to where it would be, but without the need for the filament holder.…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
It's a sled/adaptor I put together to mount a Raspberry Pi Pico where an Arduino Uno would go.
The exact picture of the full version model is the middle one and the bottom one, the standard one is the top one. A modular 3D-printed series for the Arduino Uno R3. Includes a clean standard case and an open-access variant with…
A modular 3D-printed series for the Arduino Uno R3. Includes a clean standard case and an open-access variant with precision holes that allow pin headers and jumper wires to be inserted without removing the case — ideal for prototyping…
This is a minor tweak to a wonderful model that repurposes the Ender 3's Z-stop switch as a filament runout sensor (once you install a BL-Touch and no longer need it). This remix simply adds an M2 nut at the filament's entrance point, in…
10% Infill .2 Layer Height Print in PETG Print 2 Pegs from Soarpix's Skadis accessories pack for mounting. Requires use of the CX-Uno Extruder Housing Modification for tighter spacing. Uses aluminum extruder mounts included with coprint…
I took the wonderful card tray that tjdesgin made and extended everything above the base by 25mm to fit all of the Uno - Show'em No Mercy and the expansion's cards. I cut the model just above the base (where the cards sit) and stretched…
Carrying and playing case for Uno Go. One side can be used to hold the deck and the other the played card pile. Keeps cards in place while on the go in vehicles or public seating. This is a remix of Flat Stick's Uno Go Playing Case. I…
it requires only a microswitch, and a 4mm sphere (untested but possible in theory) or a 5,5mm slice of 4mm teflon tube, 2 m3x12 scews & 2 t-nuts to be mounted to a 2020 0r 2040 extrusion. Where the filament comes out it has 2 spikes that…
suporte frontal ("buzzer bar") para canas de pesca. Ideal para entusiastas de carp fishing ou pesca de competição que desejam imprimir o seu próprio equipamento personalizado. feito com pequenos tubos de 10 mm diâmetro 50 cm comprimento
Show off and commemorate the love and appreciation 🥰 the Prusa Printables community gives you for your published models, makes, articles, posts or anything else that is liked with one of these custom fan made badges. Each features low…
Place one piece on top, the other on the bottom of the filament guide. Use a 20mm M3 screw and nut to lock it all up tight. Printed with no supports, 2mm layer height. See the remix link below to print the best z-axis spool holder I ever…
AI-assisted Pokémon model ready to print. Great for display and collectors. If you print one, I’d love to see it! :)
My friend was using beat up boxes for his many decks of UNO and I wanted to make replacement boxes for each edition. Of the many variations that exist there was no version for Penguins of Madagascar, so I decided to make it. I took logo…
Customized version of https://www.thingiverse.com/thing:1568652 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1568652 If you print my otto model, I would be grateful for your feedback/implementation…
You will need 4 M3 screws , one longer than 13mm , another longer than 17mm and two longer than 20mm ( can use 4 M3 by 20mm screw too ) and two M3 nuts. The sensor mount mounts on top of the print head wire harness holder by replacing the…
You should add: 1 - 6in PTFE extension 1 - 6in sensor wire extension disconnect the PTFE tube and wires from the sensor, then unscrew the original filament sensor and screw it to the adapter. Add the 6 inch extensions to the sensor and…
No support needed. Print the lid upside down and everything else with normal orientation You can use the pins or 6x M3 30mm screws
