Counting matching models…
This is a compact custom filament sensor version of the legendary Sherpa Mini that includes several improvements. Please read the differences section compared to the original Sherpa Mini. This version uses nylon screws and nylon nuts at…
For my exhaust air heat pump, I have several external wall air diffusers, so-called ALDs, in the shutter box. I designed this component to improve the sound insulation here. A “first element” and several “middle elements” are required.…
Used the hinge and support designs from https://www.thingiverse.com/thing:1250943 as inspiration, with slight alterations. As for dimensions, some inspiration was taken from https://www.thingiverse.com/thing:2005920 .
Print as shown in the picture (layer 0.12), without supports inside. Build of Materials: Switch OMRON D2F-5 (use NO) - 1pcs. Connector jst 2p 1.27 - 1pcs. Steel ball 5mm - 1pcs. ECAS04 (remove the rubber part) - 1pcs. M2x12 - 2pcs.…
Case that fits an Arduino UNO with the CNC Shield V3 and a 60mm cooling fan. The top part just snaps in place and is easy to remove to get to the arduino underneath. The fan is mounted with two screws from the bottom.
Layer height: 0.12mm Outer shells: 3 Filling density: 15% Filling pattern: honeycomb Print speed: 40mm/s Travel speed: 70mm/s Extruder: 210°C Platform: 50°C No support needed.
Arduino UNO 10" Rack Mount Bracket Panel 2U - Staffa installazione Arduino UNO rack da 10" Suitable for: https://www.printables.com/model/1150903-rack-server-rails-self-supporting-m6-m4-thread-col 06/02/2025 Update: added resized models…
🛠 Materials & Hardware: Split Keyring Loops -> [ https://amzn.to/41RZ3zh ] Pieces Lobster Clasp Phone Charm Straps -> [ https://amzn.to/3P3RBOD ] PLA Combo Black & White -> [ https://amzn.to/4t0FgJ4 ] PLA OVERTURE Red -> […
Features: Fan Mount: Includes a dedicated mounting point for a 50x50mm cooling fan on top, ensuring efficient airflow to prevent overheating during prolonged use. Easy Access: Provides cutouts for all essential ports, connectors, and…
Replace your tiny lamp knob with this easy to turn paddle one! There are 2 models. One is threaded and the other is self tapping. The lampshade should be printed using PETG unless you are using a low power/heat LED bulb.
The body parts are attached to each other using bolts and nuts.
A 45 degree remix of the filament runout sensor bracket. Puts less strain on the filament path as it enters the printer.
Just adapted to use 5mm ball since I didn't have 5.5mm one
I was searching for cases for the Uno R4 WiFi, and was unable to locate any that met my expectations. Some were loose, some had weird printing artifacts, and none really felt polished enough for the job. I designed this to be form fitting…
I see the potential in this mod, so I recreated it because I wasn't able to open OpenSCAD as parametric.
Print with PETG and without supports. Use the gridfinity baseplate from Gridfinity baseplate with hook for a 10x10mm pegboard https://www.printables.com/model/486696-gridfinity-baseplate-with-hook-for-a-10x10mm-pegbo/comments
Credits: All credit goes to SilencedFrost , who has provided incredible add-ons for Neptune 4 printers. I just took this incredibel work and adapted it to my preferences. This custom mount integrates the optical filament runout sensor by…
This just a my replacement part i made uses a bolt and a 3D printed part part needed M6 bolt, 40mm minimum length https://www.ikea.com/sa/ar/assembly_instructions/rigga-clothes-rack-white__AA-712786-6-2.pdf
Les fichiers Stl sont fait avec une “plaque”. Elle sert a centrer les impressions les une au autres dans le slicer. Il faut juste la placer sous le plateau pour quelle ne soit pas imprimée. Il faudra jouer de la symétrie avec le jaune,…
The model from Alia5, just with glued Wissencat's Meowburner ears. The ears are much thinner than original Meowburner ears as they would conflict with the motor mount.
Remix to move the sensor to a higher position on the printer. Added cable tunnel with Print Bridges that can be removed after printing with a sharp knife. (see pic) Added Trimmable Print Supports on bracket angle that can be removed after…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Heart of Hope Juno Cosplay Backpack from Overwatch 2. The supports…
The opening of the original SV08 Sensor is wearing out very quickly, so i made a quick print, to guide the Filament through a short piece of PTFE Tube. Mount it with the stock screw. You need a PTFE Fitting (M6) and a short piece of PTFE…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com. You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Hola he creado un garaje para tu coleccion de hotwheels con una capacidad de 5 piezas y amplio espacio para agregar accesorios. El modelo puede ser impreso de diferentes formas,recomiendo imprimir con PETG para una mayor durabilidad o el…
Development base that houses an Arduino UNO/MEGA footprint board and a standard 400-point breadboard. The base has recessed cutouts for 12mm rubber feet for anti slip. For mounting the base utilizes (4) - M2x6 SHCS and (4) - M2x3x3 heat…
This is an enclosure for optical sensor. It's made to mount on the creality runout sensor bracket. the creality sensor is just a switch and I had issues with the filament wearing down the switch roller. so made a contactless version. Did…
Make descaling your automatic coffee machine easier with this simple model! Normally, you need to find just the right container to fit under the outlets and empty it multiple times during descaling. With this model, you can collect the…
This is a simple snap fit case i made for the Arduino Uno R4 in Onshape! It is modeled after the GrabCAD 3d model here https://grabcad.com/library/arduino-uno-r4-wifi-1 with .15 mm tolerances. Connectors have bigger tolerances because of…
Update 1 March 2026: Update to fix issue where if the filament is somewhat curved it would not fully press on the switch and triggering the sensor off.
I wanted to try something different and modeled a Wheatley Vodka stand with stirrer holder! I did use the Polymaker Matte PLA Filament Army Blue 1.75mm 1kg 3D Printing Filament, PolyTerra 3D Printer PLA Filament. The blue is almost dead…
Same as last time, but with improvements! Uses less filament and is designed better to let the sensor spin freely. I made this myself. Mount to attach the run out sensor to where it would be, but without the need for the filament holder.…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
It's a sled/adaptor I put together to mount a Raspberry Pi Pico where an Arduino Uno would go.
The exact picture of the full version model is the middle one and the bottom one, the standard one is the top one. A modular 3D-printed series for the Arduino Uno R3. Includes a clean standard case and an open-access variant with…
A modular 3D-printed series for the Arduino Uno R3. Includes a clean standard case and an open-access variant with precision holes that allow pin headers and jumper wires to be inserted without removing the case — ideal for prototyping…
This is a minor tweak to a wonderful model that repurposes the Ender 3's Z-stop switch as a filament runout sensor (once you install a BL-Touch and no longer need it). This remix simply adds an M2 nut at the filament's entrance point, in…
10% Infill .2 Layer Height Print in PETG Print 2 Pegs from Soarpix's Skadis accessories pack for mounting. Requires use of the CX-Uno Extruder Housing Modification for tighter spacing. Uses aluminum extruder mounts included with coprint…
I took the wonderful card tray that tjdesgin made and extended everything above the base by 25mm to fit all of the Uno - Show'em No Mercy and the expansion's cards. I cut the model just above the base (where the cards sit) and stretched…
Carrying and playing case for Uno Go. One side can be used to hold the deck and the other the played card pile. Keeps cards in place while on the go in vehicles or public seating. This is a remix of Flat Stick's Uno Go Playing Case. I…
it requires only a microswitch, and a 4mm sphere (untested but possible in theory) or a 5,5mm slice of 4mm teflon tube, 2 m3x12 scews & 2 t-nuts to be mounted to a 2020 0r 2040 extrusion. Where the filament comes out it has 2 spikes that…
suporte frontal ("buzzer bar") para canas de pesca. Ideal para entusiastas de carp fishing ou pesca de competição que desejam imprimir o seu próprio equipamento personalizado. feito com pequenos tubos de 10 mm diâmetro 50 cm comprimento
Show off and commemorate the love and appreciation 🥰 the Prusa Printables community gives you for your published models, makes, articles, posts or anything else that is liked with one of these custom fan made badges. Each features low…
Place one piece on top, the other on the bottom of the filament guide. Use a 20mm M3 screw and nut to lock it all up tight. Printed with no supports, 2mm layer height. See the remix link below to print the best z-axis spool holder I ever…
AI-assisted Pokémon model ready to print. Great for display and collectors. If you print one, I’d love to see it! :)
My friend was using beat up boxes for his many decks of UNO and I wanted to make replacement boxes for each edition. Of the many variations that exist there was no version for Penguins of Madagascar, so I decided to make it. I took logo…
Customized version of https://www.thingiverse.com/thing:1568652 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1568652 If you print my otto model, I would be grateful for your feedback/implementation…
You will need 4 M3 screws , one longer than 13mm , another longer than 17mm and two longer than 20mm ( can use 4 M3 by 20mm screw too ) and two M3 nuts. The sensor mount mounts on top of the print head wire harness holder by replacing the…
You should add: 1 - 6in PTFE extension 1 - 6in sensor wire extension disconnect the PTFE tube and wires from the sensor, then unscrew the original filament sensor and screw it to the adapter. Add the 6 inch extensions to the sensor and…
No support needed. Print the lid upside down and everything else with normal orientation You can use the pins or 6x M3 30mm screws
Maker Chip Blank Inspired by https://numakers.com filament spool. 3MF file with multiple parts for easy color change. Designed to print on a multi color printer with 0.25 nozzle but results may vary. Adjust purging volumes depending on…
While installing an Infinity Flow S1 on my Ender 5 Max, I discovered that PFTE tubing must be present and secure for the entire filament path. My choices were to eliminate the runout sensor and run PFTE directly to the toolhead from the…
more stylish version, and still strong. added some chamfers, fillets, some style holes, and more material on the sensor side for a flush and better look. print flat side down, no supports needed. I used PC-GF which is probably over kill,…
my make is chopped dont flame me i still need to calibrate my filament 😭 new nozzle
I printed the upper and lower part in ABS and the Buttons in PLA. The Buttons are a little tricky to print, i used a 0.2mm nozzle and a layer height of 0.08mm. Hardware required: 5x M2x4mm Brass inserts 4x M2x12mm countersunk screw 1x…
I feed the filament from above. That's why I positioned the sensor so that the orientation is correct and the distance between the filament spool and the sensor is as small as possible. The existing threaded holes are used to attach the…
Small plug for the side of the Centauri Carbon for users who are using an internal spool holder.
Eine kleine Hilfe um die Spielrichtung bei Uno nicht aus den Augen zu verlieren Benötigt wird eine M3x5 Imbus eine M3x10 Imbus 2 Magnete 8mmx2,8mm Gedruckt in PLA 3 Wandlinien und je 5 Top und Bottom Linien
Ich habe hier ein Kartendeck für mein UNO Spiel gebaut. In der V2 ist das ganze 10mm breiter damit die Imbus M3 Schraubenköpfe versenkt sind. im Deckel ist beidseitig M3 Rechts Gewinde
Inspired by a true story. At TITC 2026, Bruno Cohelio lost his rear wing mid-race and ended up in the wall. This small part exists so that never happens to you. These oval backing plates sit between the screw head and the lexan body,…
GitHub Text on the bottom can be changed via editing the "Text" Sketch in Fusion. The DONTPRINT file shows a preview of said text. WIP!
📌 Overview This model is a custom enclosure for Arduino UNO , inspired by the design of the first‑generation PlayStation 4 . The case is composed of two parts — a top shell and a bottom shell — which snap together using four integrated…
this model was inspired by a commercial I saw but nobody was printing it... probably because of micro plastics
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Hello Kitty Juno Cosplay Mediblaster from Overwatch. The supports…
Required Hardware 1x M3 screw (6 mm length) 1x M2 screw (12 mm length) 1x 8 mm Bowden/PTFE adapter 1x Omron D2F microswitch 1x M3 heat-set insert (4.2 mm outer diameter in my version – adjust if needed) 6-7mm piece of Bowden tube
With 0.2 mm layers the thinner version has only 4 layers and you have to change filament colour after printing the second layer. For bright colours on black like on my photo (i printed only 4 layers) better use the thicker version with 6…
Filament runout sensor clip that mounts to PTFE rube. Printed with PETG.
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Hello Kitty Juno Cosplay Rocket Backpack from Overwatch. The supports…
Cards are stacked in the holder while your phone is positioned using the built-in rail system, which allows X- and Y-axis adjustments for perfect scanning alignment. Works with phones who have a left or right camera position. Perfect for…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Hello Kitty Juno Cosplay Headphones from Overwatch. The supports…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Hello Kitty Juno Cosplay Sleeves from Overwatch. The supports required.…
This is a custom-designed organizer for the UNO Show 'em No Mercy tin. The original packaging often struggles to keep the massive deck especially if you have an expansion pack. This insert splits the deck into three manageable stacks and…
card case to hold your messy UNO cards, with a rotating sleeve mechanism that locks in place, never damage your UNO cards again!! holds standard small UNO cards, 2 part mechanism and cut a piece of filament to length for the hinge.
Remix of an Arduino Uno stand by tonyrod on thingiverse. I modded this years ago and figured I share here on Printables in case it was of use to anyone. License type matches license of original model
This is a development tray I modeled. While this is 100% modeled by myself I have to give credit to BV3D Bryan Vines and tonyrod on thingiverse for design Ideas. This is heavily influenced by Bryan Vines design from 2019. Bryan if you…
This is the Hasunosora Girls' High School (蓮ノ空女学院) School Badge, from the a multimedia project "Link! Like! Love Live!". This is my original model, though this design is from a 2D design in the mobile game "Link! Like! Love Live!". Print…
Features: No screws needed! You simply print and assemble using a 1.5 mm copper wire core. I didn't want to post this here, because these boxes are just a wagon and a small cart. But then I decided to post it because it is unique: First…
I have made a base mount for arduino uno r3. First import a arduino uno r3 .igs files in onshape then takes measurement and create a base, after that extrude it, then do the other things.
A hightened bottom for your plant pots so water can run through to the bottom. Scale in X and Y for your pot.
Krabička na UNO karty, tiskl jsem s límcem ,aby se zamezilo zvedání okrajů , záleží na Vašich zkušenostech.
Hey, this is a case for the UNO R3. I did a lot of research and found many cases, but none of them really appealed to me. I also found a few somewhat similar designs and tried printing them, but they still were not exactly what I wanted…
An Arduino Uno Adafruit Motorshield (v2.3) case in the design of a motorsport EMU (Engine Management Unit) for my racing simulation aluminium extrusion rig. There are two variants, one for the 80mm aluminium extrusion width and one for…
Bracket for attaching the BigTreeTech Smart Filament Sensor to a vertically mounted extrusion motor, such as what's found on the Ender 3 line of printers. This works best when the extruder has a flat surface to mount against - in my case…
If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 https://www.printables.com/@Paja/collections/3228932 Thank you so much for every download, like, and…
If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 https://www.printables.com/@Paja/collections/3228932 Thank you so much for every download, like, and…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Juno Music Festival MediBlaster Pistol from Overwatch. The supports…
Filament runout sensor cable holder for the top bar. Includes insert for 8x2 magnets, though they are not required. I recommend printint out of TPU.
Ich habe nach einem FilamentRunoutSensor gesucht der dem Orbiter2 smart sensor ähnelt und nicht zu sehr aufbaut, da ich keinen gefunden hab, habe ich selber einen konstruiert. verwendet habe ich einen nicht mehr benötigten…
A modern recreation of the iconic 1983 Deluxe Uno card tray. This design holds the standard 108-card deck and eliminates the need for support structures while printing. Specifications Capacity: 108 standard Uno cards Material: PLA…
