Anycubic Filament Runout Sensor Redirection Mount for Kobra 2 Max / Kobra 2 Pro / Kobra 2 Plus/ Kobra 2 Neo / Kobra 2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This allows redirection of filament for easier travel to hotend when printing with a Top mounted spool holder.
- Rating
- 4.889 / 5
- Likes
- 304
- Downloads
- 2,797
- Makes
- 20
- Views
- 11,631
- Reviews
- 18
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This allows redirection of filament for easier travel to hot end when printing with a top mounted spool holder.
Installation and Design explanation:
Runout Senor Bracket: Tighten down the bolt to sensor bracket to the bottom base. Then back your bolt off just enough, so your sensor bracket can move freely up and down.
Bottom Base: is designed if there is too much tension and friction with your filament going through the filament sensor it will slightly turn to show you there is a problem.
Other Option is Fixed mount allow no movement. No Safety Latch feature.
Updated Model 11/29/2023 v1.5
* Thickened Doesn't flex during repeated retractions. If printed with too low of infill.
Works great with this spool holder:
https://www.printables.com/model/658306-anycubic-kobra-2-max-top-side-mount-single-or-dual
Print with 25% infill
Hardware required M3 Bolts