Garage for 1:24 Skoda Models (unofficial)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I've made a small garage for the 1:24 Skoda Octavia (https://www.printables.com/model/762153-skoda-octavia-124)
- Rating
- 0 / 5
- Likes
- 44
- Downloads
- 142
- Makes
- 1
- Views
- 1,285
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles & Machines
- License
- Creative Commons — Attribution — Noncommercial
A small garage made for the 1:24 Skoda Octavia model (https://www.printables.com/model/762153-skoda-octavia-124), but you can use it for any prints with similar sizes.
For the main body of the garage, I've used 0.3 mm layer height, 15 % infill, and a minimal amount of support for the Skoda emblem.
The sliding door is print-in-place, for me, 0.2 mm layer height worked fine. The door parts can be disassembled and/or reconnected with others so you can combine different colors in one door.
The small knob on the sliding door is a 3 minute-long print with a 0.1 mm layer height. After printing it can be glued on the door.