1 / 4
Meanwell HRPG-300-12 Enclosure for Prusa i3 MK2 — zdjęcie 1
1 / 4

Meanwell HRPG-300-12 Enclosure for Prusa i3 MK2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The Meanwell HRPG-300-12 has a different form factor than the original Prusa power supply. Here are STL files for my…

Ocena
5 / 5
Polubienia
2
Pobrania
19
Wydruki
1
Wyświetlenia
394
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

The Meanwell HRPG-300-12 has a different form factor than the original Prusa power supply.
Here are STL files for my case and a parametric FreeCAD drawing that should easily adapt to different dimensions. The upper mounting hole in the printer's frame is utilized by the side_mount.stl adapter.

Note that this was designed for the older Prusa i3 MK2 with a 12V supply. The newer i3 MK3 series requires 24V.

After a few months, I found an issue with this design: There are no venting holes.
The particular meanwell unit I used has a fan on the rear end, but no other grills to let out the air... :-)
TODO: Add some vents at the bottom, but still protect the electrics well!

Category: 3D Printer Parts

Tagi