1 / 4
Meanwell HRPG-300-12 Enclosure for Prusa i3 MK2 — image 1
1 / 4

Meanwell HRPG-300-12 Enclosure for Prusa i3 MK2

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The Meanwell HRPG-300-12 has a different form factor than the original Prusa power supply. Here are STL files for my…

Rating
5 / 5
Likes
2
Downloads
19
Makes
1
Views
394
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution

The Meanwell HRPG-300-12 has a different form factor than the original Prusa power supply.
Here are STL files for my case and a parametric FreeCAD drawing that should easily adapt to different dimensions. The upper mounting hole in the printer's frame is utilized by the side_mount.stl adapter.

Note that this was designed for the older Prusa i3 MK2 with a 12V supply. The newer i3 MK3 series requires 24V.

After a few months, I found an issue with this design: There are no venting holes.
The particular meanwell unit I used has a fan on the rear end, but no other grills to let out the air... :-)
TODO: Add some vents at the bottom, but still protect the electrics well!

Category: 3D Printer Parts

Tags