Tronxy X5SA Pro Afterburner Direct Drive back plate mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tronxy X5SA Pro Afterburner Direct Drive back plate mod
- Ocena
- 4 / 5
- Polubienia
- 0
- Pobrania
- 32
- Wydruki
- 1
- Wyświetlenia
- 170
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This isn't really a complete remix, but more of an add-on. I figured this would be the best way for people to see it.
I picked up a Tronxy X5SA Pro 400 for a project, and price was great. I did however want to give it a bit more functionality on a budget. So, the main project using the Afterburner mod was a great starting point, and I already had motors and gears on hand. As a note I do have a 350mm model running E3D Hemera (non-XS), so the XY carriage can handle the weight.
Turns out a longer motor would hit the stock back plate. So designed a backplate with a notch from Raabi original step files. This made it easy and made sure the holes line up. With the existing aluminum spacers this worked out great add the washers for extra surface area.
While I had other parts printing for the Tronxy, and as I looked at the back plate, I noticed a lot more surface area. i then created a separated part that replaced the aluminum spacers, added more surface area that contacts the XY carriage, and reenforced parts around the belts.
**This second part has stupid in its name because I thought it was stupid over engineered, and it made me laugh.
I was curious so I did weigh the parts:
-stock with aluminum spacers - 27 grams
-3D Printed minimum with aluminum spacers - 7 grams
-3D Printed (stupid) - 12 grams