1 / 2
Rotational Moment of Inertia Apparatus v2 — zdjęcie 1
1 / 2

Rotational Moment of Inertia Apparatus v2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

New Version of the "Rotational Moment of Inertia Apparatus" for Physics demonstration

Ocena
0 / 5
Polubienia
3
Pobrania
12
Wydruki
0
Wyświetlenia
133
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Moment of Inertia Apparatus

First I have to thank then original designer “falconphysics” for the model my daughter found.  She asked me to make for her to demonstrate for her Physics class.  

Please refer to  “falconphysics”  link for any instructions on how to use the apparatus.

I also designed a spall threaded adapter to help center the Bearing on the ¼" threaded rod.  

And a small printed String Washer to keep the thread from pulling out through the holes. 

The Cap Rod Holder is for a 10mm vertical rod to place the apparatus on.

Each device you create will require 5 threaded  rods, 4 to 16 ¼' Hex Nuts, String of equal length, up to 4 Ft. a varying number of Steel or Fender Washers as Weight, and a weights of equal size to pull the string.  

Hardware Parts