1 / 2
Rotational Moment of Inertia Apparatus v2 — image 1
1 / 2

Rotational Moment of Inertia Apparatus v2

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€5.74 – €7.02 net (excluding VAT)

For file: Physisc-Rotation-Spindle_0.2mm_PLA_SV06_6h20m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €6.38 excluding VAT (range midpoint).

Weight reported by the author
81 g
Print time reported by the author
6.33 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

New Version of the "Rotational Moment of Inertia Apparatus" for Physics demonstration

Rating
0 / 5
Likes
3
Downloads
12
Makes
0
Views
133
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Moment of Inertia Apparatus

First I have to thank then original designer “falconphysics” for the model my daughter found.  She asked me to make for her to demonstrate for her Physics class.  

Please refer to  “falconphysics”  link for any instructions on how to use the apparatus.

I also designed a spall threaded adapter to help center the Bearing on the ¼" threaded rod.  

And a small printed String Washer to keep the thread from pulling out through the holes. 

The Cap Rod Holder is for a 10mm vertical rod to place the apparatus on.

Each device you create will require 5 threaded  rods, 4 to 16 ¼' Hex Nuts, String of equal length, up to 4 Ft. a varying number of Steel or Fender Washers as Weight, and a weights of equal size to pull the string.  

Hardware Parts