Hexagonal-patterned watering can v1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Squeeze the flexible TPU inset into the hexagon pattern for an eye-catching watering can with 0.5L capacity 🪴
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This watering can consists of two parts: A hexagonal patterned outer part, and an inner part that fits snugly inside. The dual color model can be printed with a single extruder. However, there is a twist: As the outer part encloses the inset to lock it in place, the inset has to be printed using a flexible material. This allows squeezing it inside:
| Step 1: preparation | Step 2: Fold and squeeze the flexible inset into the outer part | Once fully inserted, the outer part encloses the flexible inset and locks it in place. |
 |  |  |
 |  |  |
If you like the idea of a dual color - dual material - design also check out my other watering can with a Voronoi pattern: https://www.printables.com/model/735686-voronoi-watering-can !
Printing instructions
Outer part ("hexagonal patterned skeleton"):
- use PLA/PETG or similar
- I recommend organic supports
- a printfile sliced at 0.3mm layer height is included
Flexible inset:
- use a Flex material; I used yellow Extrudr Medium TPU (98A)
- no supports required
- 0.3mm layer height