1 / 4
Stanely Classic Vacuum Bottle - Anti Slip Bottom Sleeve
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add a TPU sleeve to the bottom of the bottle
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed a bottom sleeve for the Stanley Classic Vacuum bottle (1.1 QT/1 L).
TPU Filament: SainSmart - TPU-BLK. Layer Height: 0.2 mm. Bed temperature: 50 C. Nozzle: 230 C. Printed on Prusa MK3S+. Designed using Alibre Design.
